Uniden DS845 - Manual

Setting Up the Answering System To Turn the Answering System On Press - the pre-recorded greeting will play and your system is ready to accept calls. ans on To Record Your OutgoingMessage. Press and hold . After you hear a short tone,release the key. Record your greeting while speaking within 15cm o...

Quick Start Guide Initial Settings Ring Time - the number of rings before the Answering System answers the call Set Ring Time to T/S (= 9 rings) Record Time - the length of time a caller may record a messageSet Record Time to 1 minute RING TIME 2 / 4 / T S REC TIME A N N / 4 / 1 To Delete Messages D...

CONTENTS CONTENTS OF Y OUR O WNERS MANU AL Installation & SafetyQuick Start Guide Installing the Base UnitInstalling the Handset BatteryMaking a CallSetting up the Answering SystemUsing the Answering SystemContents Controls & Functions WelcomeFeatures Setting Up your Telephone Accessories In...

FEATURES WELCOME Congratulations on your purchase of the Uniden DS845 digital cordless telephone. This phone is designed for reliability, long life and outstanding performance utilisingthe latest in 900 MHz Digital Spread Spectrum Technology. l l l l l l l l l l l l TO YOUR NEW PHONE 900MHz Digital ...

Rechargeable Battery AC Adaptor Belt Clip ACCESSORIES INCLUDED IN YOUR PACKAGE If any of these items aremissing or damaged, contactyour place of purchase. To get the most from yourphone, please read thisOwner’s Manual thoroughly.Be sure to complete and mail the product consumer supportcard. Telephon...

When the battery charge becomes low If the phone is not in use, Low Battery flashes and none of the keys will operate. If the phone is in use, Low Battery flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging. Use only t...

7 USING Y OUR PHONE MAKING AND RECEIVING CALLS T o ans w er a call (phone ringing) Basic phone operation T o make a call When Handset On Base When Handset Off Base button Using the Base T o hang up (Auto Standby) Return the handset tothe base. Press on the handset Press 0 # tone oper flash speaker D...

During a call, you can transfer the call to another optional handset (maximum 7 handsets).1. Press 2. Press [ handset No. ] The handset number is shown on the right side of the display. 3. Press4. Called second handset rings.5. Press on the second handset and Call Transfer is completed. NOTE CALL TR...

9 Redial from the Base Unit 1. To call the last number dialed from the Base Unit, press .2. Press - the last number dialed will be redialed.3. To hang up, press . REDIAL 3 95983577 3rd ‘most recent numberdialed’ is displayed. Press again 4. Press and the number will be dialed. Redial from talk mode ...

Only numbers stored in the Base Unit may be dialled from the Base Unit. ! 10 STORING PHONE NUMBERS AND NAMES The pause feature is usefulfor long distance calling, credit card dialing, orsequences that require apause between digits. With the Handset Memory Dialing allows you to dial a number usingjus...

11 Memory Dialling from Standby 1. Press once, the handset displays your programmed memory locations. 2. Press and or enter a two-digit number to select thememory location you would like to dial. 3. Press - the displayed number is dialed. MAKING CALLS WITH MEMORY DIALLING 01 FRED 02 JOHN SMITH 03 KA...

EDITING A STORED NAME AND PHONE NUMBER 1. Press and hold until MEMORY STORE is displayed. 2. Press and or enter a two-digit number to select the memory locationyou would like to edit. 3. Press - the screen displays the memory location number you have selected. 4. Press or to select ‘Edit Memory’, th...

7. Press - MEMORY DELETED is displayed. 8. After a few seconds the display returns to the MEMORY STORE screen. You may select another number to delete (return to step 2) or press to return to standby. MEMORY 02 DELETED MEMORY STORE 02 EMPTY 03 KAY JONES 1. Press and hold until MEMORY STORE is displa...

15 If a handset is registered at any time as handset 1, all other handsets will need to be registered again from Step 1. The original handset supplied with the Main Base is already registered as handset 1, thisleaves handset numbers 2 - 7 available. It is very important to allocate each handset adif...

You must subscribe to the Caller ID service from your local telephone company to use these features.When the telephone rings, the Caller ID feature allows you to view the caller’s name and phone number on the display before you answer the phone. The handset displaysthe phone number of the incoming c...

If a message has alreadybeen stored in the selectedmemory number location,a confirmation screen is displayed.Press to indicate “Yes”.Press to overwrite. Using the Caller ID List Calling a party from the Caller ID list You can place a call from the Caller ID list. The DS845 stores up to 60 messages.1...

Setting Up Your Answering System Setting your greeting: When you receive a call, the answering system automatically plays either a preset messageor your own greeting. Recording a personal outgoing message (Greeting): 1. Press and hold until you hear a tone. Start recording your message immediately a...

Re-register the handset - see page 17 Disconnect some telephones Talk flashesNo dial tone 23 Cannot dial out Dial Prefix may be incorrectly set -see page 20 to delete Dial Prefix. TROUBLE SHOOTING

W ARRANTY UNIDEN NEW ZEALAND LIMITED SERVICE DIVISION One Year Limited Warranty Important: Evidence of original purchase is required for warranty service. Warrantor: Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited ELEMENT OF WARRANTY: Uniden warrants to the original ret...

© 2001 Uniden Australia Pty Limited Uniden New Zealand Limited FOR PUR CHASING A UNIDEN PHONE! THANK YOU