Uniden DRX100 - Manual - manualsarea.com

Page 2 - Important Safety Instructions!; This unit is NOT waterproof.; Important Information; What’s in the manual?

2 Getting Started ................................ 3 Installing Your Phone .................................3 Getting to Know Your Phone ...................4 Using the Handset Menu ..........................6 Using Your Phone ............................. 8 Using the Phonebook .........................

Page 3 - Installing Your Phone; Charge the Battery; Test the Connection; Talk; End; Changing to Pulse Dialing; Global Setup; GETTING STARTED

3 Installing Your Phone Charge the Battery 1. Unpack all handsets, battery packs, and battery covers. If you need to remove a cover, press in on the notch and slide the cover down and off. 2. Line up the battery connector with the jack inside the handset; the connector only fits one way. 3. Push the...

Page 4 - Getting to Know Your Phone; Parts of the Base; Parts of the Handset

4 Getting to Know Your Phone Parts of the Base Charging Contacts Find Handset Key (icon) What it does Find hs • In standby: page all handsets. Parts of the Handset Twelve-key dial pad UP PHONEBOOK SPEAKER DOWN CID REDIAL/PAUSE MESSAGE/MUTE INTERCOM/CLEAR END TALK/FLASH MENU/SELECT Charging contacts ...

Page 6 - Reading the Display; Icon; The ringer is turned off and will not ring for new calls.; Using the Handset Menu; PhonEbook; Handset Setup

6 Reading the Display The table shows the possible status icons & what they mean. Since the icons appear based on what the phone is doing, you won't see all the icons at the same time. Icon What it means The signal from the base is 1) strong or 2) weak. The ringer is turned off and will not ring...

Page 7 - AM; cid; Time Adjustment; Menu

7 Handset Setup Menu You can change these settings separately for each handset. T-coil Turn on T-coil mode to reduce noise on hearing aids equipped with a telecoil (T-coil) feature. T-coil mode shortens talk time, so keep your battery fully charged. Ringer Tones Choose this handset's ring tone. As y...

Page 8 - Entering Text on Your Phone; cursor to move to the next space and enter the second letter.; USING YOUR PHONE; This section explains the most common functions on the phone.

8 Entering Text on Your Phone • Use the 12-key dial pad anytime you want to enter text into your phone (a name in the phonebook, the handset banner, etc.). • If two letters in a row use the same key, enter the first letter; wait for the cursor to move to the next space and enter the second letter. T...

Page 9 - Assigning a Speed Dial Number; Create New; Finding a Lost Handset; Changing the Volume; uP; to increase; down; to; Using the Caller ID and Redial Lists; Caller ID list; CID list; To...

9 Assigning a Speed Dial Number You can assign a speed dial number to a phonebook entry when you create that entry for the first time (or when you edit it). Press PhonEbook and select Create New . As you enter the phonebook number, one of the options you will see is to assign a speed dial number to ...

Page 10 - Using Call Waiting; (CIDCW) service displays Caller ID information for a waiting call.; Using the Phonebook; the same phonebook, so only one handset can access it at a time.

10 To… Press... dial the highlighted number Talk/Flash or sPEakEr. (If the number is a toll call but there is no 1 at the beginning, press * to add 1 before dialing.) close the lists PhonEbook . For individual record options, highlight a number and press MEnu/sElEcT : Delete Entry Erase the number f...

Page 11 - Delete All; USING SPECIAL FEATURES; Silent Mode; Always On; Multihandset Features; To use the features in this section, you need at least 2 handsets.; Not Registered

11 Adding Phonebook Entries With the phone in standby, open the phonebook. Press MEnu/sElEcT and select Create New. Enter a name, number, and then assign a speed dial number and a personal ring if desired. • Enter the phone number (up to 20 digits) exactly as you would dial it. • If you need the pho...

Page 12 - Conference Calling; sPEakEr; Call Transfer; All

12 • If a handset was ever registered to a base, you must reset it before it can register to a new base; see p. 16, or see the accessory handset manual. Conference Calling • When an outside call comes in, two handsets can join in a conference call with the outside caller. • To join a call that’s alr...

Page 13 - cancel a page; answer a page; Chain Dialing; Global Setup/Voice Mail Tone; Setting Up Voice Mail Access

13 To... Press... cancel a page End . answer a page inTErcoM/clEar or Talk/Flash . end an intercom call End . Both handsets return to standby. Chain Dialing If you often have to enter a series of digits or a code number during a call, you can save that code number to a phonebook entry and use the ph...

Page 14 - Editing Your Voice Mail Number; Global Setup/Edit Voice Mail; MuTE; IMPORTANT INFORMATION; Solving Problems; General problems

14 4. To access your provider’s voice mail service now, press MEssagE/MuTE . The system will dial the voice mail service and you can enter your security code manually when prompted. Editing Your Voice Mail Number You can add your voice mail security code to the voice mail number string.1. Press MEnu...

Page 15 - Unavailable; Installing a Line Filter or DSL Filter; Liquid Damage

15 Audio issues Possible solutions There’s a lot of noise or static on the line • Check for interference from appliances (microwave ovens, TVs, etc.) or wireless devices (baby monitors, WiFi equipment, etc.). Move the handset or base away from the interference source. • If you use a telecoil hearing...

Page 16 - Resetting Handsets; Registering Handsets; AC adapter; Rechargeable Battery Warning; Rechargeable batteries must be

16 Resetting Handsets If you have trouble with a handset or if you want to replace one, clear the registration information from the base and the handset: 1. Press & hold End and # at the same time until you see the System Reset menu. 2. If you still have the base the handset is registered to, se...

Page 17 - Compliance Information; FCC Part 68 Information

17 Warning! The cords on this product and/or accessories contain lead, a chemical known to the state of California to cause birth defects or other reproductive harm. Wash hands after handling.Uniden works to reduce lead content in our products & accessories. Compliance Information FCC Part 68 In...

Page 18 - Disable All Functions Except

18 able your alarm equipment. If you have questions about what will disable alarm equipment, contact your telephone company or a qualified installer. Any changes or modifications to this product not expressly approved by the manufacturer or other party respon- sible for compliance could void your au...

Page 19 - To return to normal operation,; Terminal equipment; Radio equipment; -Year Limited Warranty; Evidence of original purchase is

19 D1760 Handset 1. Install the battery. 2. Once Welcome, Please wait... disappears from the display, press and hold End , MEnu , and * simultaneously. 3. After about 5 seconds, a confirmation tone sounds, indicating all functions except charging have been disabled. To return to normal operation, cy...

Uniden DRX100 - Manual

Table of Contents:

Summary

Other Uniden Models