Page 2 - Table of Contents
2 Table of Contents Welcome ....................................................................... 5 Installing the Phone .................................................... 6 Choosing the Best Location ...................................... 6Installing the Battery ...................................
Page 3 - Adjusting the Ringer, Earpiece and
3 Customizing Your Handsets ..................................... 29 Changing the Handset Banner ................................ 29Selecting a Ring Tone ............................................. 29Activating AutoTalk .................................................. 30Activating Any Key Answer...
Page 5 - elcome; Welcome
5 W elcome Welcome Thank you for purchasing a Uniden Multi-Handset phone. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. DECT 2035+1 OM.indb 5 DECT 2035+1 OM.indb 5 15/7/08 11:59:40 AM 15/7/08 11:59:40 AM
Page 6 - Installing the Phone; Choosing the Best Location; PLACE YOUR BASE; Near an AC outlet and; TRY TO AVOID
6 Installing the Phone Installing the Phone Choosing the Best Location When choosing a location for your new phone, here are some important guidelines you should consider: Notes: For maximum range: Keep both the base and handset antennas free of obstruction. When the handset is not in use, place the...
Page 7 - Installing the Battery; BLACK
7 Installing the Phone Installing the Battery Use only the Uniden BT-904 rechargeable battery pack supplied with your cordless telephone. Push the battery pack connector in firmly. (You should hear it click into place.) Gently tug on the battery wires to make sure the connection is secure. Line up t...
Page 8 - Connecting the AC adapter; To the base; DC IN 9V
8 Installing the Phone Connecting the AC adapter To the base To avoid risk of fi re and shock, only use the Uniden AAD-041S(M) adapter with the base. To the charging cradle (for multi-handset packs only) Use only the Uniden AAD-600S(M) adapter with the charging cradle. Don’t put any power cord where...
Page 9 - Charging the Handset; charge; charge; charge
9 Installing the Phone Charging the Handset If you have an accessory handset, place it in the charging cradle with the display facing forward. Charge your handset at least 15 to 20 hours before plugging into the phone line. Place the handset in the base cradle with the display facing forward. Make s...
Page 10 - Connecting to the Phone Line; TEL LINE
10 Installing the Phone Connecting to the Phone Line Make sure that the battery pack is fully charged. Connect the telephone cord to the TEL LINE jack. Connect the telephone cord to a telephone wall jack. What if Check TEL Line appears on the handset display? The telephone cord may not be connected ...
Page 11 - Testing the Connection
11 Installing the Phone Do you have DSL or any high-speed Internet service delivered through your phone line? Try putting a DSL fi lter between the base and the wall jack. Without a fi lter, telephone-line- based Internet services can interfere with standard phones. Testing the Connection Pick up th...
Page 12 - NOW YOU ARE READY TO USE YOUR PHONE!
12 Installing the Phone Make a quick test call, and then press END to hang up. What if there is a lot of static? Check the sources of interference described in Choosing the Best Location (see page 6): is the base near any of those? Note: Make sure you can get a dial tone on any accessory handsets th...
Page 13 - Expanding Your Phone; Adding accessory handsets; Registering accessory handsets
13 Installing the Phone Expanding Your Phone Adding accessory handsets Your phone supports a total of six cordless handsets, including any that were supplied with your phone. You can now place a fully-featured cordless handset anywhere AC power is available to connect the charging cradle. Your phone...
Page 14 - Using Multiple Bases; Registering the handset to another base; does
14 Installing the Phone Resetting the Handset on page 60). Or to use multiple bases, see the next section. Using Multiple Bases The handsets supplied with your phone can be registered to a total of four different bases. Compatible bases include the DECT 2015 and DECT 2035 series. (See our website or...
Page 15 - Selecting the base
15 Installing the Phone Selecting the base After you register your handset to more than one base you can set the handset to automatically search for a new base if the base it’s currently connected is unavailable or out of range. You can also manually select which base you want the handset to connect...
Page 16 - Getting to Know Your New Phone; Features; Answering system features
16 Getting to Know Your New Phone Getting to Know Your New Phone Features 1.8GHz DECT expandable systemExpands up to 6 handsetsCaller ID/Call Waiting with phonebook matchStore 30 Caller ID numbers70-number phonebook with alphabetical searchPersonalized ring and display name by partyTransfer single l...
Page 17 - Terminology Used in this Manual; Manual Conventions
17 Getting to Know Yo ur New Phone Terminology Used in this Manual Accessory Handsets Additional handsets that can register to the base, allowing you to add handsets without connecting another phone line. This base supports a total of six cordless handsets; see page 13 for compatible handsets. Base ...
Page 18 - Parts of the Handset; new message
18 Getting to Know Your New Phone Parts of the Handset Twelve-key dial pad key (down) key (caller ID/right) MENU/SELECT key /MUTE key (messages/mute) END key # key key (speaker) Microphone Charging contacts /TONE key key (up) new message LED Earpiece Display (LCD) CLEAR/INT'COM key (clear/intercom) ...
Page 19 - Parts of the Base
19 Getting to Know Yo ur New Phone Chargingcontacts charge LED Speaker message counter LED ANSWERON/OFF key FIND key key (play/stop) key (delete) key (repeat/right) key (volume up) key (volume down) key (skip/left) Parts of the Base DECT 2035+1 OM.indb 19 DECT 2035+1 OM.indb 19 15/7/08 12:00:04 PM 1...
Page 20 - Using the Interface; Reading the Display; In
20 Using the Interface Using the Interface Reading the Display Handset ID and banner Number of new Caller ID calls received Call duration Time In standby During a call The ringer off icon indicates that the ringer is turned off. The voice mail icon appears when you have messages waiting in your voic...
Page 21 - Using the Four-way Function Key; Increase the volume
21 Using the Interface Using the Four-way Function Key Your handset has a four-way function key that allows you to move the cursor on the display and access the most commonly used features at the touch of a button. Press the left side of the key to open the phonebook. Press the right side of the key...
Page 22 - Entering Text from Your Handset
22 Using the Interface Entering Text from Your Handset You can use the number keypad on your handset to enter text by referring to the letters printed on each number key. When you press the number key in a text entry fi eld, the phone displays the fi rst letter printed on the number key. Press the n...
Page 23 - Basic Setup; Setting the Day & Time; Activating Personal Ring
23 Basic Setup Basic Setup Setting the Day & Time To change the time shown in the display, follow the steps listed below.If you do not set the clock on your answering system, your messages on the answering system may not have the correct time and day stamp. Press MENU/SELECT . Move the cursor to...
Page 24 - Activating the Key Touch Tone; Insert 0
24 Basic Setup Activating the Key Touch Tone Key Touch Tone is the tone your keypad makes when keys are pressed. You can turn this tone on or off. Press MENU/SELECT . Select the Handset Setup menu, and then the Key Touch Tone submenu. Move the cursor to select On or Off. Press MENU/SELECT . You will...
Page 25 - Creating Phonebook Entries; Setting Up the Phonebook
25 Setting Up the Phonebook Each handset has its own separate phonebook that holds up to seventy names and numbers. When a handset’s phonebook is full, the handset beeps and shows Memory Full on the display. You cannot add any names and numbers in that handset’s phonebook until you delete some of th...
Page 26 - Finding a Phonebook Entry; Editing an Existing Phonebook Entry
26 Assign a personal ring tone for this entry (PERSONAL RING).You can attach a special ring tone to each phonebook entry; the phone will use this ring tone when this person calls. Use and to select one of the seven different ring tone options (see Selecting a Ring Tone on page 29 for a complete list...
Page 27 - Storing Caller ID or Redial Numbers in the Phonebook; Deleting a Single Phonebook Entry
27 Storing Caller ID or Redial Numbers in the Phonebook You can store Caller ID records or redial numbers in the phonebook so you can use them later. Go to the Caller ID or redial list and select the number you want to store. (If the Caller ID information did not include the number, then you will no...
Page 29 - Customizing Your Handsets; Changing the Handset Banner; Customizing Y
29 29 Customizing Your Handsets All of the following options are set separately for each handset, so you can customize a handset for each room in your house. Changing the Handset Banner Each handset will display a banner name once it is registered to the base. The default banner is Handset #1, Hands...
Page 31 - Using Your Phone
31 Using Y our Phone Using Your Phone From a cordless handset From a handset speakerphone Making a call Pick up the handset from the cradle.Press TALK/FLASH . Listen for the dial tone.Dial the number. OR Pick up the handset from the cradle.Dial the number.Press TALK/FLASH . 1.2.3.4. 1.2.3. Pick up t...
Page 32 - Making a Call from the Phonebook; Chain dialing from the phonebook; Switching to the Handset Speakerphone During a Call
32 Using Y our Phone Making a Call from the Phonebook With the phone in standby, press to open the phonebook. Find the phonebook entry you want to call (see Finding a Phonebook Entry on page 26). Press TALK/FLASH or to dial the number. Note: You can also press TALK/FLASH or before you open the phone...
Page 33 - Using Caller ID, Call Waiting, and Redial Lists; Using the Caller ID List
33 Using Caller ID, Call Waiting, and Redial Lists Using Caller ID, Call Waiting, and Redial Lists If you subscribe to Caller ID service from your phone company, your phone will show you the caller’s phone number and name (if available) whenever a call comes in. If you subscribe to Caller ID on Call...
Page 34 - Deleting Caller ID Numbers; Using Call Waiting; For Australian Model:
34 Using Caller ID, Call W aiting, and Redial Lists Deleting Caller ID Numbers To delete only one Caller ID number, press when the phone is in standby, and then fi nd the number you want to delete. Press MENU/SELECT and select Delete Entry . When the phone asks you to con fi rm, select Yes . To dele...
Page 35 - Redialing a Number; Deleting a Redial Record
35 Using Caller ID, Call Waiting, and Redial Lists Redialing a Number You can quickly redial the last fi ve numbers dialed on each handset. With the phone in standby, press the REDIAL/PAUSE to open the redial list. Use and or REDIAL/PAUSE to scroll through the redial list. When you fi nd the number ...
Page 36 - Adjusting the Ringer, Earpiece and Speaker Volume; Adjusting the Ringer Volume; Adjusting the Earpiece Volume
36 36 Adjusting the Ringer , Earpiece and Speaker V olume Adjusting the Ringer, Earpiece and Speaker Volume Adjusting the Ringer Volume You can choose from four ringer volume settings (off, low, medium, and high) separately on each handset or the base. With the phone in standby, press or on the hand...
Page 37 - VOLUME; Adjusting the Audio Tone; Finding a Lost Handset
37 37 Adjusting the Ringer , Earpiece and Speaker V olume Note: The handset earpiece and the handset speaker have separate volume settings. Base Speaker: You can choose from ten volume levels for the base speaker when the answering system announces or plays a message. To adjust the base speaker volu...
Page 38 - Using Hold, Conference and Transfer; Placing a Call on Hold; Transferring a Call
38 Finding a Lost Handset Using Hold, Conference and T ransfer Using Hold, Conference and Transfer Placing a Call on Hold During a call, press CLEAR/INT’COM to place the caller on hold. If you leave a caller on hold for more than ten seconds, the display screen will read, Line On Hold.To return to t...
Page 39 - Answering a transferred call
39 Using Hold, Conference and T ransfer When another handset accepts the transferred call, you will be disconnected. If you want to rejoin the call, press TALK/FLASH or again. Answering a transferred call When a handset receives a call transfer, it sounds a paging tone; handsets also show the ID of ...
Page 40 - Using Special Features; Privacy Mode
40 Using Special Features Using Special Features Privacy Mode Privacy mode prevents other handsets (that are connected to the same base) from interrupting your call. As long as your handset is in privacy mode, other handsets can’t join your call or make any calls of their own: their displays will sh...
Page 41 - Using the Intercom; Making an intercom page
41 Using Special Features Using the Intercom You can use the intercom to talk to another handset without using the phone line. The handsets must be currently connected to the same base (see page 15). Making an intercom page With the phone in standby, press CLEAR/INT’COM . Use or to select the handse...
Page 42 - Answering an intercom page; Muting the Microphone
42 Using Special Features Answering an intercom page When the intercom page tone sounds, the display will show the ID of the handset that is paging. Press TALK/FLASH or CLEAR/INT’COM . Note: If AutoTalk is on, the handset will automatically answer the page when you pick up the handset from the cradl...
Page 43 - Setting Up the Answering System; Recording a Personal Greeting; Selecting a Greeting
43 43 Setting Up the Answering System Setting Up the Answering System You can set up your answering system’s features from the handset. Only one handset at a time can access the answering system menus. Note: If you have multiple bases, select the base with answering system you want to access (see pa...
Page 44 - Deleting Your Personal Greeting
44 44 Setting Up the Answering System To keep this greeting: Do nothing. To switch to the other greeting: Press 6 while the system is playing the current greeting. Each time you press 6, the system switches between the pre-recorded and the personal greeting. The last greeting you hear is used as the...
Page 45 - Setting the Number of Rings; message counter
45 45 Setting Up the Answering System Setting the Number of Rings The ring time setting allows you to set the number of rings the caller hears before your answering system plays the outgoing message. You can set the ring time to answer after six, nine or twelve rings. If you enable the Toll Saver (T...
Page 46 - Activating the Message Alert
46 46 Setting Up the Answering System Activating the Message Alert The message alert feature sounds a short alert tone every fi fteen seconds whenever you have a new message. To turn on the message alert: Press MENU/SELECT . Select the Ans. Setup menu, and then the Mesasge Alert submenu.Move the cur...
Page 47 - Using the Answering System; Turning Your Answering System On and Off; From the base
47 Using the Answering System Using the Answering System Turning Your Answering System On and Off From the base From the handset Turning On With the phone in standby, press ANSWER ON/OFF . The system announces “Answering System is on” and plays the current greeting.The message counter LED displays t...
Page 48 - Remote Operation from the Handset; Command
48 Using the Answering System Remote Operation from the Handset You can operate your answering system from the handset whenever the phone is in standby. Press /MUTE to start remote operation. During remote operation, the phone beeps to let you know it’s waiting for your next command. Press the numbe...
Page 49 - Reviewing Messages
49 Using the Answering System Reviewing Messages The message counter LED on the base displays the number of messages stored in memory. When you have new messages (that you have not listened to yet), the message counter LED on the base and the new message LED on the handset fl ash. The answering syst...
Page 50 - Screening Calls; Turning Off the Message Alert Tone; Setting a security code or Personal Identi
50 Using the Answering System Screening Calls From the base From the handset While the system is taking the message, simply listen to the caller over the base speaker. (You need to activate the base call screen feature in advance. See page 46.) To mute the call screen and allow the caller to continu...
Page 51 - If you want to
51 Using the Answering System To operate from a remote location, use any touch-tone telephone, and follow these steps: Call your telephone number and wait for the system to answer. If the answering system is off, it will answer after about fi fteen rings and sounds a series of beeps. During the gree...
Page 52 - all Mounting the Base; Wall Mounting the Base; Wall plate
52 W all Mounting the Base Wall Mounting the Base This phone can be mounted on any standard telephone wall plate using an optional wall-mount bracket. You can purchase a wall-mount bracket by visiting www.uniden.com.au for Australian models and www.uniden.co.nz for New Zealand models for customer su...
Page 54 - Maintenance; Speci; Battery Information; Battery life
54 Maintenance Maintenance Speci fi cations Operating temperature 32° F to 122° F (0° C to 50° C) AC adapter Base Charging cradle Part number AAD-041S(M) AAD-600S(M) Input voltage 240V AC, 50Hz 240V AC, 50Hz Output voltage 9V DC @ 350mA 9V DC @ 210mA Battery pack Part number BT-904 Capacity 650mAh, ...
Page 55 - Low battery alert; Cleaning the charging contacts; Power Failures; Contacts
55 Maintenance Low battery alert When the battery pack is very low, the phone is programmed to eliminate functions in order to save power. When Low Battery - Charge Handset appears in the handset display and the phone is in standby, none of the keys will operate. If you are on a call, complete your ...
Page 56 - Troubleshooting; Common Issues; When you have this
56 Troubleshooting Troubleshooting Common Issues If your phone is not performing to your expectations, please try these simple steps fi rst. If these steps do not solve your problem, please visit www.uniden.com.au for Australian models and www.uniden.co.nz for New Zealand models for customer support...
Page 59 - Weak or Hard to Hear Audio
59 Troubleshooting Weak or Hard to Hear Audio If the caller’s voice sounds weak or soft, the signal might be blocked by large metal objects or walls; you might also be too far from the base, or the handset’s battery may be weak. Try adjusting the volume of the earpiece (see page 36) or the audio ton...
Page 60 - Installing a telephone line; Resetting the Handset
60 Troubleshooting Installing a telephone line fi lter or DSL fi lter Any broadband Internet service that uses your telephone line might interfere with standard phones. The most common type of these services, DSL, often causes static on your telephone. Fortunately, an easy-to-install fi lter removes...
Page 61 - Resetting the Handset Without the Base
61 Troubleshooting When the base information is deleted, the handset displays Handset not registered-place handset on base to register . See your Owner’s Manual for help. Re-register the handset to the base (see Registering accessory handsets on page 13). If the handset cannot contact the base, it w...
Page 62 - Changing the Line Mode for Multiple Extensions; Traveling Out of Range
62 Troubleshooting Changing the Line Mode for Multiple Extensions Line mode refers to the method that telephones use to signal each other that an extension is in use. Customer service may recommend changing the line mode if you have any of the following problems: Your phone keeps ringing after someo...
Page 63 - Liquid Damage; Handset; IMPORTANT
63 Troubleshooting Liquid Damage Moisture and liquid can damage your cordless phone. If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal. If moisture or liquid has entered the plastic housing (i.e. liquid ...
Page 64 - SAVE THESE INSTRUCTIONS
64 Precautions! Precautions! Before you read anything else, please observe the following: Warning! Uniden Australia Pty Ltd and Uniden NZ Ltd DO NOT represent this unit to be waterproof. To reduce the risk of fi re, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture...
Page 65 - Index
65 Index Index A Accessory handsets .................... 13Answering calls............................ 31Answering system Reviewing messages ....... 49Setting up ......................... 43Turning on/off ................... 47When away from home .... 50 Any key answer ........................... 30...
Page 67 - Remote Operation Card
67 Remote Operation Card Remote access away from home Turn on the answering system remotely 1. Call your phone number from a touch-tone phone. 2. During the outgoing message, press # and enter your PIN code. The answering system announces the number of messages stored in memory and the voice prompts...
Page 69 - Memo
69 Memo DECT 2035+1 OM.indb 69 DECT 2035+1 OM.indb 69 15/7/08 12:00:52 PM 15/7/08 12:00:52 PM
Page 71 - O N E Y E A R L I M I T E D WA R R A N T Y
71 One Year Limited W arranty O N E Y E A R L I M I T E D WA R R A N T Y UNIDEN DECT2035, DECT2035+1 and DECT 2035+2 CORDLESS PHONEIMPORTANT : Evidence of original purchase is required for warranty service. WARRANTOR : Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited War...
