Uniden DECT2015+1 - Manual

6 Installing the Phone Installing the Phone Choosing the Best Location When choosing a location for your new phone, here are some important guidelines you should consider: Notes: For maximum range: Keep both the base and handset antennas free of obstruction. When the handset is not in use, place the...

7 Installing the Phone Installing the Battery Use only the Uniden BT-904 rechargeable battery pack supplied with your cordless telephone. Push the battery pack connector in firmly. (You should hear it click into place.) Gently tug on the battery wires to make sure the connection is secure. Line up t...

8 Installing the Phone Connecting the AC adapter To the base To avoid risk of fire and shock, only use the Uniden PS-S0635YL3 AC adapter with the base. To the charging cradle (for multi-handset packs only) Use only the Uniden AAD-600S(M) AC adapter with the charging cradle. Connect the AC adapter to...

9 Installing the Phone Charging the Handset If you have an accessory handset, place it in the charging cradle with the display facing forward. Charge your handset at least 15 to 20 hours before plugging into the phone line. Place the handset in the base cradle with the display facing forward. Make s...

10 Installing the Phone Connecting to the Phone Line Make sure that the battery pack is fully charged. What if Check TEL Line appears on the handset display? The telephone cord may not be connected correctly. Check the telephone cord connection. Connect the telephone cord to the TEL LINE jack. Route...

11 Installing the Phone Do you have DSL or any high-speed Internet service delivered through your phone line? Try putting a DSL filter between the base and the wall jack. Without a filter, telephone-line- based Internet services can interfere with standard phones. Testing the Connection Pick up the ...

1 Installing the Phone Make a quick test call, and then press END to hang up. What if there is a lot of static? Check the sources of interference described in Choosing the Best Location (see page 6): is the base near any of those? Note: Make sure you can get a dial tone on any accessory handsets tha...

13 Installing the Phone Expanding Your Phone Adding accessory handsets Your phone supports a total of six cordless handsets, including any that were supplied with your phone. You can now place a fully-featured cordless handset anywhere AC power is available to connect the charging cradle. Your phone...

14 Installing the Phone Resetting the Handset on page 51). Or to use multiple bases, see the next section. Using Multiple Bases The handsets supplied with your phone can be registered to a total of four different bases. Compatible bases include the DECT 015 and DECT 035 series. (See our website or c...

15 Installing the Phone Selecting the base After you register your handset to more than one base, you can set the handset to automatically search for a new base if the base it's currently connected is unavailable or out of range. You can also manually select which base you want the handset to connec...

16 Getting to Know Your New Phone Getting to Know Your New Phone Features 1.8GHz DECT expandable systemExpands up to 6 handsetsCaller ID/Call Waiting with phonebook matchStore 30 Caller ID numbers70-number phonebook with alphabetical searchPersonalized ring and display name by partyTransfer single l...

17 Getting to Know Your New Phone Terminology Used in this Manual Accessory Handsets Additional handsets that can register to the base, allowing you to add handsets without connecting another phone line. This base supports a total of six cordless handsets; see page 13 for compatible handsets. Base T...

18 Getting to Know Your New Phone Parts of the Handset Twelve-key dial pad key (down) key (caller ID/right) MENU/SELECT key /MUTE key (messages/mute) END key # key key (speaker) Microphone Charging contacts /TONE key key (up) new message LED Earpiece Display (LCD) CLEAR/INT'COM key (clear/intercom) ...

19 Getting to Know Your New Phone Charging contacts charge LED FIND KEY Parts of the Base DECT 2015+1 OM.indb 19 7/7/08 12:30:33 PM

0 Using the Interface Using the Interface Reading the Display Handset ID and banner Number of new Caller ID calls received Call duration Time In standby During a call The ringer off icon indicates that the ringer is turned off. The voice mail icon appears when you have messages waiting in your voice...

1 Using the Interface Using the Four-way Function Key Your handset has a four-way function key that allows you to move the cursor on the display and access the most commonly used features at the touch of a button. Press the left side of the key to open the phonebook. Press the right side of the key ...

Using the Interface Entering Text from Your Handset You can use the number keypad on your handset to enter text by referring to the letters printed on each number key. When you press the number key in a text entry field, the phone displays the first letter printed on the number key. Press the number...

3 Basic Setup Basic Setup Setting the Time To change the time shown in the display, follow the steps listed below. Press MENU/SELECT . Move the cursor to Day & Time and press MENU/SELECT . Use and to select the day of the week, and press MENU/ SELECT . Note: The day of the week does not appear o...

4 Basic Setup Activating the Key Touch Tone Key Touch Tone is the tone your keypad makes when keys are pressed. You can turn this tone on or off. Press MENU/SELECT . Select the Handset Setup menu, and then the Key Touch Tone submenu.Move the cursor to select On or Off.Press MENU/SELECT . You will he...

5 Setting Up the Phonebook Each handset has its own separate phonebook that holds up to seventy names and numbers. When a handset’s phonebook is full, the handset beeps and shows Memory Full on the display. You cannot add any names and numbers in that handset’s phonebook until you delete some of the...

6 7 Assign a personal ring tone for this entry (PERSONAL RING).You can attach a special ring tone to each phonebook entry; the phone will use this ring tone when this person calls. Use and to select one of the seven different ring tone options (see Selecting a Ring Tone on page 9 for a complete list...

6 7 Storing Caller ID or Redial Numbers in the Phonebook You can store Caller ID records or redial numbers in the phonebook so you can use them later. Go to the Caller ID or redial list and select the number you want to store. (If the Caller ID information did not include the number, then you will n...

8 Deleting all Phonebook Entries With the phone in standby, press . Press MENU/SELECT , and then select Delete All. Delete All? appears in the display.Move the cursor to select Yes.Press MENU/SELECT . You will hear a confirmation tone, and Deleted! appears in the display. Copying Phonebook Entries t...

9 9 Customizing Your Handsets All of the following options are set separately for each handset, so you can customize a handset for each room in your house. Changing the Handset Banner Each handset will display a banner name once it is registered to the base. The default banner is Handset #1, Handset...

30 30 When you hear the tone you want to use, press MENU/SELECT . You will hear a confirmation tone. Activating AutoTalk AutoTalk allows you to answer the phone simply by picking up the handset from the cradle. You do not have to press a button to answer the call. Press MENU/SELECT . Select the Hand...

31 Using Y our Phone Using Your Phone From a cordless handset From a handset speakerphone Making a call Pick up the handset from the cradle.Press TALK/FLASH . Listen for the dial tone.Dial the number. OR Pick up the handset from the cradle.Dial the number.Press TALK/FLASH . 1..3.4. 1..3. Pick up the...

3 Using Y our Phone Making a Call from the Phonebook With the phone in standby, press to open the phonebook. Find the phonebook entry you want to call (see Finding a Phonebook Entry on page 6). Press TALK/FLASH or to dial the number. Note: You can also press TALK/FLASH or before you open the phonebo...

33 Using Caller ID, Call Waiting, and Redial Lists Using Caller ID, Call Waiting, and Redial Lists If you subscribe to Caller ID service from your phone company, your phone will show you the caller’s phone number and name (if available) whenever a call comes in. If you subscribe to Caller ID on Call...

34 35 Using Caller ID, Call W aiting, and Redial Lists 35 Deleting Caller ID Numbers To delete only one Caller ID number, press when the phone is in standby, and then find the number you want to delete. Press MENU/SELECT and select Delete Entry . When the phone asks you to confirm, select Yes . To d...

34 35 35 Using Caller ID, Call Waiting, and Redial Lists Redialing a Number You can quickly redial the last five numbers dialed on each handset. With the phone in standby, press the rEDiAL/PAUSE to open the redial list. Use and or rEDiAL/PAUSE to scroll through the redial list. When you find the num...

36 36 Adjusting the Ringer , Earpiece and Speaker V olume 37 37 Adjusting the Ringer, Earpiece and Speaker Volume Adjusting the Ringer Volume You can choose from four ringer volume settings (off, low, medium, and high) separately on each handset. With the phone in standby, press or . The display sho...

36 36 37 37 Adjusting the Ringer , Earpiece and Speaker V olume Adjusting the Audio Tone If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on a call. Your phone gives you three audio tone options: low, natural and high; the default sett...

38 Finding a Lost Handset Using Hold, Conference and T ransfer 39 Using Hold, Conference and Transfer Placing a Call on Hold During a call, press CLEAr/iNT’CoM to place the caller on hold. If you leave a caller on hold for more than ten seconds, the display screen will read, Line On Hold.To return t...

38 39 Using Hold, Conference and T ransfer Transferring a Call You can transfer a call from one handset to another. The handsets must be currently connected to the same base (see page 15). During a call, press CLEAr/iNT’CoM . Use or to select the handset you want to transfer the call to, and then pr...

40 Using Special Features 41 Using Special Features Privacy Mode Privacy mode prevents other handsets (that are connected to the same base) from interrupting your call. As long as your handset is in privacy mode, other handsets can’t join your call or make any calls of their own: their displays will...

40 41 Using Special Features Answering an intercom page When the intercom page tone sounds, the display will show the ID of the handset that is paging. Press TALK/FLASH or CLEAr/iNT’CoM . Note: If AutoTalk is on, the handset will automatically answer the page when you pick up the handset from the cr...

4 Using Special Features 43 Using a Voice Mail Service If you subscribe to a voice mail service, you can use your phone to access your voice mailbox. When there are messages waiting in your voice mailbox, the new message LED on the handset flashes, and appears in the handset display. If you program ...

4 43 Using Special Features Resetting the voice message waiting indicator When you receive a new voice mail message, the new message LED on the top of the handset flashes and appears in the handset display. In the event your message waiting light gets out of sync with your phone company’s voice mess...

44 Using Special Features 45 Wall Mounting the Base This phone can be mounted on any standard telephone wall plate using an optional wall-mount bracket. You can purchase a wall-mount bracket by visiting www.uniden.com.au for Australian models and www.uniden.co.nz for New Zealand models for customer ...

46 47 Maintenance 47 Maintenance Specifications Operating temperature 3° F to 1° F (0° C to 50° C) AC adapter Base Charging cradle Part number PS-S0635YL3 AAD-600S(M) Input voltage 40V AC, 50 Hz 40V AC, 50 Hz Output voltage 6V DC @ 350mA 9V DC @ 10mA Battery pack Part number BT-904 Capacity 650mAh, ...

46 47 47 Maintenance Low battery alert When the battery pack is very low, the phone is programmed to eliminate functions in order to save power. When Low Battery - Charge Handset appears in the handset display and the phone is in standby, none of the keys will operate. If you are on a call, complete...

48 Troubleshooting 49 Troubleshooting Common Issues If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve your problem, please visit www.uniden.com.au for Australian models and www.uniden.co.nz for New Zealand models for customer suppo...

50 Troubleshooting 51 When you have this problem... Try... I can’t get two handsets to talk to an outside caller. Checking to see that there are not two handsets already using the conference feature (see page 38). Making sure another handset is not in Privacy Mode (see page 40). Making sure both han...

50 51 Troubleshooting For static on only one handset or in a specific location: For static on more than one handset: Check nearby for one of the common interference sources. Try moving the handset away from a suspected source, or try moving the suspected source so it’s not between the handset and th...

5 Troubleshooting 53 Select the base you want to de-register the handset from (see Selecting the base on page 15).Press and hold END and # for more than five seconds. Select Deregister HS. Select the handset which you are operating, and then press MENU/SELECT . The phone will ask you to confirm the ...

5 53 Troubleshooting Changing the Line Mode for Multiple Extensions Line mode refers to the method that telephones use to signal each other that an extension is in use. Customer service may recommend changing the line mode if you have any of the following problems: Your phone keeps ringing after som...

54 Troubleshooting Liquid Damage Moisture and liquid can damage your cordless phone. If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal. If moisture or liquid has entered the plastic housing (i.e. liquid ...

55 Precautions! Precautions! Before you read anything else, please observe the following: Warning! Uniden Australia Pty Ltd and Uniden NZ Ltd DO NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture....

56 Index 57 Index A Accessory handsets .................... 13Answering calls............................ 31Any key answer ........................... 30Audio tone ................................... 37AutoTalk ....................................... 30 B Banner ........................................

59 One Year Limited W arranty One Year Limited Warranty UNIDEN DECT2015, DECT2015+1 & DECT2015+2 IMPORTANT : Evidence of original purchase is required for warranty service. WARRANTOR : Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited Warranty only available in origin...