Uniden DECT1725+1 - Manual

Setting the date and time Connecting the telephone line cordHigh Speed Internet TEL LINE The phone uses the 12 or 24 hour clock. 1 Press . 2 Press or to select and press . 3 Press or to select and press . 4 Press or to select and press . 5 Press or to select and press . 6 Press or until is displayed...

Your Handset Earpiece/Receiver Display Clear Down Redial/Flash Temporary Tone Menu/OK Hook Intercom #/Lock • Use to delete incorrect digits or letters • Press to go back to the previous menu • Press and hold to exit menu and return to standby. • Press and hold to off the snooze temporally • Press to...

Your DECT1725 base and charger (+1, +2 models only) AC power socket Telephone line socket charge LED find handset key BASE (yellow) - Lights up when handset is charging in the cradle. - Press to page handset(s) [8] CHARGER

Your handset display The following figure shows the layout of icons on your handset display. Menu Indicates more characters to display to the left Indicates more characters to display to the right Indicates new CID Displayed when viewing the phonebook list or in the phonebook menu. Flashes when the ...

Standby Display Once charged, your handset display will be as below, displaying the handset name and number, and time and date. This is referred to as ‘standby mode’. For example: Battery Level Indicator Handset-Base Signal Indicator Time of Day Handset Number [10]

Quick Guide Function Button press Make a call or press , enter number. Preparatory call Enter number, or press . Adjust earpiece volume During a call, or . End a call or place handset on base. Receive a call Phone rings, . Redial Press , then or to display number or press . Mute During a call, . To ...

Using your phone Make a call Adjust the earpiece/receiver volume during a call Preparatory dialling (pre-dial) Handset range Call timer 1. Press . The symbol is displayed. When you hear the dial tone, dial the number you want. The number is shown in the display. After a short delay the call timer wi...

Handsfree mode End a call Receive a call Call Waiting Australia: New Zealand: Receiving internal calls You can use handsfree mode to talk to your caller without holding the handset to your ear. You can speak into the handset microphone and listen over the loudspeaker. Handsfree also enables other pe...

Redial Redial the last number called Redial any of the last 10 numbers called Store a redial number to the phonebook Your handset saves the last 10 numbers called into a redial list. You can select and redial any number from the list at a later time. Each handset has its own redial list. Numbers sto...

Deleting numbers from the redial list Mute (privacy) Finding/paging handsets To stop the paging ring: 1 In standby mode, press to display the last number called. 2 Press or to display any of the last 10 numbers called. 3 With the number you want displayed, press 4 Press or to select the number selec...

Using the phonebook You can store your 50 frequently used names and numbers in the phonebook for easy dialling. Phonebook entries are stored alphabetically. 1 Press . 2 Press or to select . Press . 3. Select . Press . 4 appears. Enter name using the keypad, then press . Stored names can be up to 12 ...

Entering a ‘pause’ in a stored number View and dial a phonebook entry To search alphabetically Edit a phonebook name/number You may need to enter a pause in some international or charge card numbers or if you are connected to a switchboard. When storing a number, at the point where you want a pause,...

Handset and base menu settings Handset earpiece Handset ringer volume Handset speaker There are 5 earpiece volumes to choose from. 1. Press to access the main menu. 2. Press or to select and press . 3 Press or to select and press . 4. Select and press . 5. Press or to select the volume you want, the...

Language Base ringer volume You can change the language the menu display will use. There are 16 languages to choose from. 1 Press to access the main menu. 2 Press or to select and press . 3 Press or to select . Press . 4 Press or to select language. Press to confirm. There are 5 volume levels to cho...

[24] Base ringer type There are 5 base ringer melodies to choose from. 1 Press to access the main menu. 2 Press or to select and press . 3 Press or to select and press . 4 Press or to select and press . 5 Press or to select the melody you want. You will hear a sample of each as you scroll through th...

Call Barring When switched on, Call Barring prevents calls being made. 1 Press to access the main menu. 2 Press or to select . Press . 3 Press or to select Press . 4 is displayed. Enter the PIN code using the number keypad. Press . 5 Press or to select or . Press to confirm. HS SETTINGS BARRING . PI...

Settings menu Tones Flash Changing the Flash time You can switch on or off the tones for key touch, battery low, and out-of-range alarm. For example, when the key tone is set to ON, you will hear a tone each time you press a keypad button. 1 Press to access the main menu. 2 Press or to select . Pres...

On the handset you want to register: 5 Press . 6 Enter the base PIN code. Pre-set base PIN ode is 0000. 7 Press . You will hear a confirmation tone when registration is complete. When in standby mode, the new handset number will be displayed. The handset will automatically be allocated with the next...

Resetting your phone For the base: For the handset: If you reset your phone, both the base and handset will return to their pre-set (default) settings. If you have more than one handset registered to your base and you complete the following procedure, only the handset you reset and the base will go ...

Default settings Handset and base Ringer Volume Base Level 4 Handset Level 5 Ringer Type External Melody 1 Internal Melody 1 Tone Key On Battery Low On Range Alarm On Alarm Off Auto Talk On Language English Select Base Base1 Flash Time Short(Australia) Long (New Zealand) Base PIN 0000 Call Barring O...

Network services TO USE CALLER ID OR ANY OTHER SERVICES DETAILED IN THIS SECTION, YOU MUST FIRST CONTACT YOUR NETWORK PROVIDER AND SUBSCRIBE TO THE RELEVANT SERVICE. With CALLER ID the caller’s number is shown in the handset display as you receive an incoming call so you can see who is calling befor...

View the Calls log Dial calls log number Copy Calls log number to the phonebook 1 Press . The latest calls log entry is displayed (or if there are no entries). 2 Press or to scroll through the calls log. 3 Press or to continue viewing other calls log entries. Press to exit and return to standby. 1 P...

Using extra handsets If you purchased a multi-pack all your handsets come pre-registered to the base. Your phone is GAP compatible, which means you can register other DECT (Digitally enhanced cordless telephone) GAP compatible handsets to your base and register your handset to other GAP compatible b...

Transferring a call Conference call You can transfer an external caller from your handset to another internal handset. 1 Press . The external caller is put ‘on-hold’. 2 Enter the number of the handset you want to call using the number keypad. 3 When the called handset answers, press or place the han...

Simple solutions The most common problems often have the simplest solutions. We hope that you will not experience any problems with your product, but in the event that you do, this section hopes to overcome any problems quickly and with minimum effort. • the telephone line cord is correctly connecte...

General information This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. • Only use the power supply that came with the product. Using an unauthorised power supply will invalidate your guar...

How many telephones can I have? All items of telephone equipment have a Ringer Equivalence Number (REN), which is used to calculate the number of items which may be connected to any one telephone line. The total recommended REN on one line is 3. If you exceed a REN of 3, your phones may not ring. Wi...

Important:Warrantor:ELEMENT OF WARRANTY: Warranty is only valid in the original country of purchase. WARRANTY DURATION: PARTS COVERED: STATEMENT OF REMEDY: PROCEDURE FOR OBTAINING PERFORMANCE OR WARRANTY: Evidence of original purchase is required for warranty service. Uniden Australia Pty Limited A....

THANK YOU FOR BUYING A UNIDEN PRODUCT. (c) 2006 Uniden Australia Pty Limited. Uniden New Zealand Ltd. Printed in China UCZZ01882WZ(0)