Uniden D22802 - Manual - manualsarea.com

Page 2 - Important Safety Instructions!; This unit is NOT waterproof.

- English Getting Started .............................3 Installing Your Phone .................................3 Getting to Know Your Phone...................4 Using the Handset Menu ..........................7 Using Your Phone ..........................9 Using an Optional Headset ....................

Page 3 - Important Information; GETTING STARTED; Installing Your Phone; Charge the Battery; TEL LINE; Test the Connection; Talk; If you don't hear a dial tone or; End; If you keep hearing a dial tone,

English - CAUTION! Risk of explosion if battery is replaced by an incorrect type! Dispose of used batteries according to the instructions. Do not open or mutilate the battery. Disconnect the battery before shipping this product. For more details, see the Important Information section. GETTING STARTE...

Page 4 - Getting to Know Your Phone; Parts of the Base; What it does; When listening to messages: delete the current

- English Changing to Pulse Dialing Your phone uses tone dialing by default. If your phone company uses pulse dialing, you need to change your phone’s dial mode. Press MEnu/sElEcT and choose Global Setup . Select Dial Mode then Pulse . You’ll hear a confirmation tone. To send DTMF tones during a cal...

Page 5 - In the first 2 seconds of a message: go to the; Parts of the Handset

English - Key (icon) What it does REv ( ) In the first 2 seconds of a message: go to the previous message.Anytime after that: restart the current message.   answER On/OFF ( ) In standby: turn the answering system on and off  Play/sTOP ( ) When the phone is ringing: ignore this call (mute the ring...

Page 6 - Reading the Display

- English Key (icon) What it does End During a call: hang up.In the menu or any list: exit and go to standby.  FlasH During a call: switch to a waiting call.  cid In standby: or during a call: open the Caller ID list.When entering text: move the cursor to the right.  MEssagE/MuTE ( ) In standby...

Page 7 - The ringer is turned off and will not ring for new calls.; Using the Handset Menu; to back out of the menu without hanging up.; Handset Setup; Menu

English - Icon What it means The signal from the base is 1) weak through 4) strong. The ringer is turned off and will not ring for new calls. The speakerphone is on. The handset is using ECO (power save) mode. You have a voice message waiting. T-coil mode is on (see p. 8). The battery is 1) full, 2)...

Page 8 - cid

- English Use this menu... To... T-coil Turn on T-coil mode to reduce noise on hearing aids equipped with a telecoil (T-coil) feature. T-coil mode shortens talk time, so keep your battery fully charged. Ringer Tones Choose this handset's ring tone. As you highlight each ring tone, the phone plays a ...

Page 9 - Call Blocking; USING YOUR PHONE; This section explains the most common functions on the phone.; Using the

English - Use this menu... To... Edit Int’l No. Enter, edit, or delete international numbers. Call Blocking Menu See p. 14 for a detailed description of the Call Blocking feature. Entering Text on Your Phone Use the 12-key dial pad anytime you want to enter text into your phone (a name in the phoneb...

Page 10 - on the base. All handsets; Find HandsET; again or press any; to increase; dOwn; to; Caller ID list; CID list; To...

10 - English Finding a Lost Handset With the phone in standby, press Find HandsET on the base. All handsets beep for 1 minute; to cancel, press Find HandsET again or press any handset key. Changing the Volume To change the... When... Press... earpiece or speaker volume for each handset you are liste...

Page 11 - Press; Delete; Using Call Waiting; FlasH

English - 11 To… Press... dial the highlighted number Talk or sPEakER. review current CID record details MEnu/sElEcT . add other digits and codes to the CID number * once to add 1 for a toll call. * twice to add the International code to the CID number. Press * a third time to return to normal mode....

Page 12 - Edit

1 - English Using an Optional Headset You can use a standard 2.5 mm telephone headset with your cordless handsets. To purchase headsets, contact the Parts Department (see the front cover). To install a headset, remove the headset jack cover and insert the headset plug into the jack. Just make and re...

Page 13 - Adding Phonebook Entries; PHOnEbOOk; Deleting All the Phonebook Entries; USING SPECIAL FEATURES; Silent Mode; Always; If the phone is in silent mode and you turn off the answering

English - 1 Adding Phonebook Entries With the phone in standby, open the phonebook. Press MEnu/sElEcT and select Create New. Enter a name & number and select a personal ring. Enter the phone number (up to 20 digits) exactly as you would dial it. If you need the phone to wait before sending the n...

Page 14 - Call Block; Call Blocking Menu Options

1 - English Call Block If you subscribe to Caller ID, you can save phone numbers to the call block list. When a call comes in, the phone compares the received phone number to the numbers on the call block list. If the phone number is on the list, the phone replaces the caller's name with Call Blocke...

Page 15 - Multihandset Features; To use the features in this section, you need at least 2; Not Registered; Call Transfer; Privacy Mode

English - 1 Multihandset Features To use the features in this section, you need at least 2 handsets. Your base supports a total of 12 cordless handsets: the one that came with the base and up to 11 accessory handsets. Your base also supports a total of 2 DRX100 range extenders, including any that ca...

Page 16 - Handset to Handset Intercom; All; Chain Dialing

1 - English automatically when you hang up; you can also turn it off by pressing MEnu/sElEcT twice. Handset to Handset Intercom Whenever the phone is in standby, you can make an intercom call between handsets without using the phone line. You can make an intercom call from any handset, but only two ...

Page 17 - When you select; Voice Mail; , you will be prompted to enter a; After you listen to your messages, the message icon turns off. If it; USING THE ANSWERING SYSTEM; Answering System Options (; Just open the menu and select

English - 1 Shift Keying (FSK) notification. Contact your voice mail provider for information. When you have new messages, the display shows a message icon. To listen to your new (and old) messages, press MEssagE/MuTE and select Voice Mail . When you select Voice Mail , you will be prompted to enter...

Page 18 - Personalizing the Greeting; Your personal outgoing message or

1 - English Select this option... To... Call Screen Turn on the call screen feature so you can hear callers as they leave messages on the base speaker (see p. 20). Ans. On/Off Turn your answering system on or off. You can also press answER On/OFF on the base. Record Greeting Record an outgoing messa...

Page 19 - Accessing the Answering System; sElEcT; Play All Messages; From the base; Play Messages

English - 1 Accessing the Answering System When the phone’s in standby, you can access the system from any handset using two different methods: Message Manager and Play Messages. Regardless of which method you use to get your messages, the following conditions apply: Only 1 handset can access the sy...

Page 20 - Screening Your Calls; Using the System While You're Away from Home; You can dial in to your answering system from any touch-tone phone.

0 - English To... From the base From a handset restart this message Wait at least 5 seconds after the message starts playing, press REv. press 1 (number key). replay an earlier message Within 2 seconds after a message starts playing, press REv. select 1 (number key). skip a message Press Fwd . Selec...

Page 21 - Remember to make a note of your new security code!; Dialing In to Your System; immediately; IMPORTANT INFORMATION; Solving Problems; General problems

English - 1 Programming a Security Code With the phone in standby, open the menu; select Ans. Setup , then select Security Code . Use the number keypad to enter a two-digit security code ( 01 to 99 ). Press MEnu/sElEcT when you’re finished. Remember to make a note of your new security code! Dialing ...

Page 22 - Unavailable

- English A handset can make calls, but it won’t ring. Make sure the ringer is turned on.Make sure Silent Mode is turned off (see p. 13).  A handset is not working. Charge the battery for 15-20 hours. Check the battery connection.  The phone keeps ringing when I answer on an extension. You may h...

Page 23 - Answering system problems Possible solutions; Record Time; Installing a Line Filter or DSL Filter; CAUTION: If the base is covered in liquid, disconnect the; If the liquid is only on the exterior housing of the base or handset,

English - Answering system problems Possible solutions The answering system does not work. Make sure the answering system is on. Make sure the base is plugged in.  The system won't record messages. See if Record Time is set to Announce Only . Delete messages (memory may be full).   A handset can...

Page 24 - Resetting Handsets; Registering Handsets; If you don’t hear a dial; Registration Failed; battery completely, then; Adapter and Battery; AC adapter; Rechargeable Battery Warning

- English Let dry for at least 3 days. Check for liquid inside the phone before replacing compartment covers & reconnecting cords. Resetting Handsets If you have trouble with a handset or if you want to replace one, clear the registration information from the base and the handset: Press & ho...

Page 25 - Compliance Information; FCC Part 68 Information

English - The batteries in this equipment may explode if disposed of in a fire. Do not charge the batteries in any charger other than the one specified in the owner's manual. Using another charger may damage the battery or cause it to explode. As part of our commitment to protecting our environment ...

Page 27 - Terminal equipment; Radio equipment; -Year Limited Warranty; Evidence of original purchase is

English - The base must be placed to allow a minimum of 20 cm (8 inches) between the antenna and all persons during normal operation. The base must not be collocated or operated in conjunction with any other antenna or transmitter. The handset is designed for body- worn operation and meets FCC RF ex...

Uniden D22802 - Manual

Table of Contents:

Summary

Other Uniden Models