Page 2 - FCC Information
FCC Information Your pager can interfere with the operation of other electrical devices even when it is functioning properly. To determine if your pager is causing interference, turn the pager off while observing the affected device. If the interference goes away, it was probably caused by your page...
Page 5 - Installing the Battery
Installing the Battery Your pager requires one 1.5 VDC, AAA battery for power. Caution: Only use the battery specified above. 1. Release the battery compartment lock.Slide and lift off the battery cover. 2. Insert the AAA battery into the compartment according to the polarity symbols (+) and (–) mar...
Page 6 - Turning Your Pager On; Turning Your Pager Off; Low Battery Warning; NOTE
Turning Your Pager On Press and hold N for approximately two seconds. The display will temporarily go blank and then show the standby display (see page 6). Turning Your Pager Off 1. At the standby display, press N to go the Function menu (page 9). 2. Press > to select POWER OFF ( ). 3. Press N ag...
Page 7 - Controls
Controls 1. Backward Menu/Page Scroll Key ( < ) 2. Forward Menu/Page Scroll Key ( > ) 3. Enter Key ( N ) 4. Speaker 5. Scroll Down Key ( ▼ ) 6. Display (see next page) 7. Scroll Up Key ( ▲ ) 8. Strap attachment 5
Page 8 - Standby Display
Standby Display 1. Time2. Message Status - Displays CALL , MAIL , Low Battery , and FULL . This symbol (-----) indicates no messages or calls. This symbol ( ) indicates all messages have been read. 3. Alarm ( ) - Indicates an alarm has been set. 4. Audio Alert ( ) - This displays when a tone has bee...
Page 9 - Clearvue Illuminated Display; TIP
Clearvue Illuminated Display Your pager is equipped with the Clearvue illuminated display. To activate this display, perform the following steps:1. With your pager on, push and hold any key ( < , > , ▲ , ▼ , or N ) for two seconds. 2. The backlight illuminates and remains on for approximately ...
Page 10 - Receiving and Displaying Personal Messages
Receiving and Displaying Personal Messages Your pager can store up to 40 messages in the order that they’re received. If the memory is full when a new message arrives, FULL appears in the bottom center of the display. The newest message then replaces the oldest in memory. ● If Quickview is off when ...
Page 11 - The Function Menu
The Function Menu There are ten choices in the Function menu: Return - Returns to the previous menu. Select Alert - Changes the alert type. Power Off - Turns the unit off. Set Alarm - Sets the alarm for time, day, and/or date. Folders - Stores up to 25 messages in each of 10 folders. Mail Drop Histo...
Page 12 - Choosing the Alert Type; Power On and Off
Choosing the Alert Type 1. At the standby display, press N . 2. Press > to choose SELECT ALERT , then press N . 3. Cycle through the alert types with the > < keys (sample alert tones will sound). 4. Select the alert type you like, then press N . 5. The selected alert will sound and the stan...
Page 13 - Setting a Daily Alarm
Setting a Daily Alarm To set the alarm for a specific time. For example, every day at 1:00 p.m.1. At the standby display, press N . 2. At the Function menu, press > to select SET ALARM , then press N . 3. Select TIME ALARM with the ▼ key, then press N . 4. Press N again and the cursor advances to...
Page 14 - Setting a Weekly Alarm
Setting a Weekly Alarm To set an alarm for a specific day of the week. For example, every Wednesday at 1:00 p.m.1. At the standby display, press N . 2. At the Function menu, press > to select SET ALARM , then press N . 3. Select TIME ALARM with the ▼ key, then press N . 4. Press N to advance the ...
Page 15 - Setting a Date Alarm; Using Folders
Setting a Date Alarm To set an alarm for a specific date and time. For example, Friday, November 22, at 1:40 p.m.1. At the standby display, press N . 2. At the Function menu press > to select SET ALARM , then press N . 3. Select DATE ALARM , with the ▼ key, then press N . 4. Press N to advance th...
Page 16 - Viewing a Folder’s Contents; Moving a Message To Another Folder
Viewing a Folder’s Contents 1. At the Function menu, press > to select FOLDERS , then press N . 2. Press ▼ to move the cursor to the desired folder. 3. Press N to view the folder’s contents. 4. The message displays. Press ▼ to scroll through the message line by line. 5. Press > to scroll throu...
Page 17 - Deleting a Message From a Folder; Deleting All Messages From a Folder
Deleting a Message From a Folder 1. View the message by following the steps in “Viewing a Folder’s Contents” (see page 14), then press N . 2. Press > to select DELETE MESSAGE , then press N . 3. Press N , and MESSAGE:## DELETED displays. Deleting All Messages From a Folder 1. View the message by ...
Page 18 - Mail Drop History
Mail Drop History Mail Drops are messages from services that are updated periodically (news, weather). When you receive a Mail Drop message, MAIL appears in the standby display. Each mail drop history folder holds up to three messages.1. At the standby display, press N . 2. Press > to select MAIL...
Page 19 - Moving, Deleting, and Deleting All Mail Drop Messages
Moving, Deleting, and Deleting All Mail Drop Messages Please see “Moving,” “Deleting,” and “Deleting All Messages” on pages 14 and 15. These instructions about folders are also applicable to Mail Drop Messages. Perform the same steps, only this time select the Mail Drop History icon instead of the f...
Page 20 - Using The Phone Directory; Entering Names and Numbers
Using The Phone Directory Entering Names and Numbers Your phone directory can store up to 128 names and numbers. Names can be up to 15 characters long, and numbers can be up to 17 characters long. All entries are sorted alphabetically.1. Press N at the standby display. 2. Press > to select PHONE ...
Page 21 - Editing the Phone Directory
8. Select the entry type with the ▼▲ keys. 9. Press > , then select the numbers with the ▼▲ keys. 10. Press N to move the cursor to the next space. 11. Once finished, press > until the cursor moves to line three. 12. Repeat steps eight and nine to enter the type and number. Press N to record y...
Page 22 - Deleting Numbers From the Directory
Deleting Numbers From the Directory 1. At the Function menu, press > to select PHONE DIRECTORY , then press N . 2. Use the ▲▼ keys to display the entry you wish to delete, then press N . 3. Press > to select DELETE ENTRY , then press N . 4. Press N . PHONE ENTRY DELETED displays. 20
Page 23 - The Setup Options Menu
The Setup Options Menu There are eight choices in the Setup Options menu: Return - Returns to previous/standby menu. Set Time and Date - Sets time and date. Folder Labels - Changes a folder’s character labels. Mail Drop Options - Sets mail drop options. Reminder - Alerts you when a new message is no...
Page 24 - Setting the Time, Day and Date; Changing Folder Labels
Setting the Time, Day and Date 1. At the Function menu, press > to select SETUP OPTIONS , then press N . 2. Press > to select SET TIME AND DATE , then press N . 3. Use the >< keys to select the minutes, 12/24 hr, or day/date mode. Change the values with the ▼▲ keys. 4. Press N to store y...
Page 25 - Mail Drop Options
Mail Drop Options You can set your pager to scroll selected mail drop messages in a “ticker” fashion across the standby display as they are received.1. At the Function menu, press > to select SETUP OPTIONS , then press N . 2. Press > to select MAIL DROP OPTIONS , then press N . 3. Press ▼ to s...
Page 27 - Changing the Display Font Size; Adjusting The Display Contrast; Managing Message Files; Personal Messages
Changing the Display Font Size 1. At the Function menu, press > to select SETUP OPTIONS , then press N . 2. Press > to select FONT SIZE , then press N . 3. Select the desired font size with the ▼▲ keys. 4. Press N to enter your selection. Adjusting The Display Contrast 1. At the Function menu,...
Page 28 - Understanding the Memory Status Reminder
Understanding the Memory Status Reminder ● Unread Personal Messages ( ). ● Unread Mail Drop Messages ( ). ● The CALL display. ● The MAIL display. ● All messages have been read ( ). ● Your pager’s memory is FULL . You need to read and/or delete your messages. 26 NOTE If you have unread personal AND m...
Page 29 - Time and Day Stamp
Unreadable Messages If a message is received that is partially or totally unreadable, the unreadable characters are replaced with square dots ( ). Tone Only A TONE ONLY message has no numeric characters.It could be an unreadable message, an error, or a preset message that alerts you to check your vo...
Page 30 - Silent Time
Silent Time You can set a range of time when your pager will not sound any alarms. For example, if you are in a meeting from 8:00 to 10:00 a.m. and do not wish to be disturbed by your pager.1. At the Function menu, press > to select SET SILENT TIME , then press N . 2. Press N and the cursor jumps...
Page 31 - Care and Maintenance
Belt Clip/Holster ● Line the pager up with the holster as shown below. ● Slide the pager into the holster, then press until it snaps into place. ● Use the spring clip (on back of the holster) to attach the holster to your belt or pocket. ● Messages can be viewed while the pager is in the holster. Ca...
Page 32 - Two Year Limited Warranty
Two Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for two years, to the original retail owner, this Uniden Product to be free from defects in materials and craft...
