UNICOM FEP-32024T - Manual

3 Ethernet Switching Technology Ethernet Switching Technology dramatically boosted the total bandwidth of a network, eliminated congestion problems inherent with Carrier Sense multiple access with Collision Detection (CSMA/CD) protocol, and greatly reduced unnecessary transmissions. This revolutioni...

4 2. Hardware Description This Section describes the hardware of the Micro-Switch/24 Desktop Fast Ethernet Switch/. The physical dimensions of the Micro-Switch/24 are: 250mmx 133 mm x 37mm (L x W x H) Front Panel The Front Panel of the Micro-Switch/24 consists of twenty-four (24) 10/100Base-TX RJ-45...

5 Figure 2-2. LED Indicators LED Status Description Green Power is supplied Power Off Power is not connected Green The port is connecting with the device Blinks The port is receiving or transmitting data LK/ACT Off No device attached Table 2-1. Descriptions of LED Indicators Rear Panel The 3-pronged...

6 Desktop Installation Set the Switch on a sufficiently large flat space with a power outlet nearby. The surface should be clean, smooth, level, and sturdy. Ensure there is enough clearance around the Switch to allow air circulation and the attachment of the power cord and cables. Attaching Rubber F...

7 3.Network Application This section provides a few samples of network topology in which the Switch is used. In general, the Micro-Switch/24 Desktop Fast Ethernet Switch is designed as a segment switch. That is, with its large address table (4K MAC address) and high performance, it is ideal for inte...

8 Segment Bridge For enterprise networks where large data broadcasts are constantly processed, this switch is an ideal solution for department users to connect to the corporate backbone. In the illustration below, two Ethernet switches with PCs, a print server, and a local server are both connected ...

9 4.Troubleshooting This section is intended to help you solve the most common problems on the Micro-Switch/24 Incorrect connections Faulty or loose cables Look for loose or obviously faulty connections. If they appear to be OK, make sure the connections are snug. If this does not correct the proble...

10 Diagnosing LED Indicators The Switch can be easily monitored through panel indicators to assist in identifying common problems you may encounter and where you can find possible solutions. If the power indicator does not turn on when the power cord is plugged in, you may have a problem with power ...

11 5.Technical Specification Standard IEEE 802.3 10Base-T Ethernet,IEEE 802.3u 100Base-TX Fast EthernetIEEE802.3x Flow Control and Back-pressure Protocol CSMA/CD Technology Store and Forward switching architecture Transfer Rate 14,880 pps Ethernet port148,800 pps Fast Ethernet port MAC address 4K Ma...

12 PowerConsumption 19 Watts (maximum) EMI FCC Class A, CE