UNICOM FEP-31016T-1 - Manual
UNICOM FEP-31016T-1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Package Contents; Per formance Specifications; Rack-mounting brackets; AC power cord; For Your Records
- Page 3 – Power; Product Specifications; General Specifications
- Page 4 – Hardware Description; The Front Panel; Figure 2. Front Panel views of; The Rear Panel; Figure 3. Rear panel view of the; LED Indicators; Segment Bridge
- Page 5 – Figure 4. Front panel view of LED indicators; Status LEDs; Network Application; Small Workgroup; Indicators; LED
908 Canada Court
City of Industry, CA 91748 U.S.A.
Phone:
626.964.7873 or 800.346.6668
Fax:
626.964.7880
www.unicomlink.com
e-mail: [email protected]
©UNICOM 2001. UNICOM and “A Network Systems Solution” are trademarks of UNICOM Electric, Inc.
All rights reserved. Specifications subject to change without notice.
Rev: 12.02
16 Port or 24 Port
10/100Base-TX Switch
Dyna-
Switch
/16
Dyna-
Switch
/24
U
SER’S
M
ANUAL
FEP-31016T-1
FEP-31024T-1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Package Contents Package includes the following: 1 8 Necessar y Cables: UTP (Unshielded Twisted Pair) Cable LED Indicators: Per Device: Power Per Por t: LINK/ACT, FDX/COL Per formance Specifications Transmission Method: Store and for ward MAC address table: 8K-entr y MAC address table Maximum For wa...
Introduction The Dyna-Switch/16 and Dyna-Switch/24 (Auto MDI/MDIX) are Fast Ethernet switches that provide wire-speed, a Fast Ethernet switchingfunction which allows high-per formance, low-cost connections to Full-duplex, Half-duplex, 10Mbps and 100Mbps Ethernet networks. TheSwitches are targeted at...
Hardware Description The Front Panel The Front Panels of the Dyna-Switch/16 and 24 consist of 10/100Base-TX RJ-45 por ts and LED Indicators. Figure 2. Front Panel views of Dyna-Switch/16 and 24 The Rear Panel The 3-pronged power plug is located at the rear panel of theswitches as shown in the Figure...
