Ultra Start 4280 - Manual
Ultra Start 4280 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALL MANUAL; TABLE OF CONTENTS; Relay Diagrams
- Page 4 – THERMISTOR/ INPUT TRIGGER TO START; Position 1 or Position 2; BYPASS MODULE DATA COMMUNICATION PORT; Connect the following wires for manual transmission vehicles:; PARK BRAKE INPUT FOR MANUAL TRANSMISSIONS; Type 4 - Disconnect Switch
- Page 6 – Press Lock; *Pause for about 1 second between programming of each remote
- Page 8 – QUICK VIEW PROGRAMMING; with the key then; BRAKE
- Page 10 – SYSTEM WIRING DETAILS; Positive Park light Output.; SYSTEM GROUND INPUT; BLUE; CONFIGURATION AND OTHER INFORMATION, PLEASE VISIT
- Page 12 – 3 PIN CONNECTOR; (Car Finder and Auxiliary 1 are not available on 2way models); *Connect to door pin for Passive Arming on 1280 and 3285.; SYSTEM PROGRAMMING -
- Page 14 – *Pause for about 1 second between programming of each remote.
- Page 16 – Helps; INSTALL MANUAL; PROGRAM MODE; ENTERING PROGRAM MODE 1; Press and release 1 time; PROGRAM SWITCH; CHIRP; Confirming
- Page 18 – The alarm will not; IGNITION KEY
- Page 20 – SIREN CHIRP
- Page 24 – RELAY DIAGRAMS; USE SPDT 12v Relay; INVERTER; USE SPDT 12v Relay; USE SPDT 12v Relay
- Page 26 – ALARM MODELS ONLY; QUICK VIEW OPERATIONS; SHOCK SENSOR SETTINGS; QUICK VIEW OPERATION CHART; BUTTON; ** PLEASE SEE OWNERS GUIDE FOR DETAILED OPERATIONS AND FEATURES; SERVICE MODE / EMERGENCY OVERRIDE
- Page 28 – TRANSMITTER PROGRAMMING; ENTERING REMOTE PROGRAM MODE; If the park lights; RESERVATION MODE
- Page 30 – If the start; PARK LIGHTS STATUS LED; NOTES
REV.2007.11.14A
TM
80 SERIES
Advanced Remote Starters &
Vehicle Security Systems
INSTALLATION GUIDE
TM
FCC ID NOTICE
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:
1. This device may not cause harmful interference, and
2.This device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the part responsible for compliance void the user’s authority to operate
this devise.
www.ultrastarters.com
The manual cover’s the operation of the 1280, 2280, 3280, 3285,
4280 and 4285 Series Remote Starters and Alarm Starters
(Including manual transmission models)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SYSTEM PROGRAMMING - Menu 1 SYSTEM PROGRAMMING - Menu 1 PAGE 2 PAGE 3 80 SERIES 80 SERIES INSTALL MANUAL INSTALL MANUAL TABLE OF CONTENTS QUICK VIEW WIRE DIAGRAM 1 5 3 2 4 6 1 2 3 4 5 6 7 8 9 10 11 12 13 1 3 2 4 OUTPUT TO ACTIVATE IGNITION CIRCUIT THE VEHICLES SELECTABLE OUTPUT* (DEFAULT 2ND IGN) 12...
SYSTEM PROGRAMMING - Menu 1 SYSTEM PROGRAMMING - Menu 1 PAGE 4 PAGE 5 80 SERIES 80 SERIES INSTALL MANUAL INSTALL MANUAL QUICK VIEW WIRE DIAGRAM MANUAL TRANSMISSION MODELS 123 123 1234 THERMISTOR/ INPUT TRIGGER TO START Position 1 or Position 2 BLACK** GREEN** BLUE** GREEN BLUE N/A* RED BLACK WHT/VIO...
SYSTEM PROGRAMMING - Menu 1 SYSTEM PROGRAMMING - Menu 1 PAGE 6 PAGE 7 80 SERIES 80 SERIES INSTALL MANUAL INSTALL MANUAL QUICK VIEW PROGRAMMING QUICK VIEW PROGRAMMING Press Lock Press Unlock Press Start Press # MENU 1 MENU 2 MENU 3 MENU 4 1 - Cycle the Ignition Key On/Off On/Off On (Leaving the key O...