Tripp Lite PR 15 - Manual
Tripp Lite PR 15 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Solid State Integrated Circuit:; Power Supply Installation; The unit will generate heat as it; Equipment Installation
- Page 3 – Installation; Equipment Connection; Plug the power supply line cord into a 120V AC, 60Hz outlet.; Current Ratings; ”Class B” audio amplifiers.; Troubleshooting; internal fuse should be checked by a qualified technician.
- Page 4 – External
1
Owner’s Manual
WARR
ANTY
REGISTR
ATION
Register online today for a
chance to win a FREE T
ripp Lite
product www
.tripplite.com/warranty
PR Series
Precision-Regulated DC Power Supplies
Models:
PR3UL, PR4.5, PR7, PR10, PR12, PR15, PR20,
PR25, PR30, PR40, PR50, PR60
For use in 120V/60Hz environments
Overview 1
Features 2
Installation 2
Current Ratings
3
Troubleshooting 3
Specifications 4
Warranty and Warranty Registration 4
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2013 Tripp Lite. All trademarks are the sole property of their respective owners.
Overview
Tripp Lite PR series DC power supplies convert standard 120 Volt AC (VAC), 60Hz power into
regulated 13.8 Volt DC (VDC) power; (12V DC output, nominal). PR series models are ideal for
powering a wide range of equipment designed to run on 12V DC power. PR series models can
also be used as general-purpose test bench power sources.
BATTERY CHARGING NOTE
DO NOT use PR series models rated at 12 amps and lower for battery charging. If you connect
a battery to any of these models with the unit NOT plugged into a live 120 Volt AC outlet or the
unit plugged in but turned OFF, you may burn out the unit because of reverse current flow.
You MAY use PR series models rated at 15 amps and higher for battery charging. However, the
battery must be separately fused with a fuse not greater than the value of the unit’s nameplate
amperage rating. Otherwise, the battery can cause current flow greater than the unit’s
amperage rating back into the unit under certain circumstances and may burn out the unit.
13-01-026-933241.indd 1
1/15/2013 3:20:03 PM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Installation Features • Solid State Integrated Circuit: Provides excellent voltage regulation to within ±0.5V; output voltage is maintained from 0 to 95% of full load • Crowbar Overvoltage Protection: Prevents overvoltage surges from damaging connected equipment (15 amp and larger models) • High Q...
3 Installation Equipment Connection There are two DC power output terminals on the rear of PR power supplies: POSITIVE (+)/ RED, and NEGATIVE (-)/ BLACK. With all equipment turned OFF, connect the DC equipment to these terminals, making sure to observe the polarity of the wiring. Connect Positive to...
4 Specifications Warranty and Warranty Registration 1-Year Limited Warranty TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or rep...
