Triplett ET30 - User Manual

Triplett ET30

Triplett ET30 Measuring Instrument – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
Page: / 2
Loading the manual


User Manual

ET30 Magnetic Field Detector

Introduction

Thank you for selecting the Triplett Model ET30 magnetic field detector. The ET30
can test solenoid valves in pneumatic/hydraulic control equipment, relays with coils,
electrically controlled solenoid valves in vehicles/machinery/oil burners, and audio
speaker coils. The ET30 responds to AC/DC magnetic fields and permanent
magnets.

Safety Information

Caution! Refer to the explanation in this Manual

Double Insulation or Reinforced insulation

CE Compliance

This device must not be handled by children. It contains hazardous objects as well as small parts that can be
swallowed.
Do not leave batteries and packing material unattended; they can be dangerous for children. If unused for an
extended period of time, remove the batteries from this device Expired or damaged batteries can cause
cauterization on contact with the skin; use suitable hand gloves in such cases. Ensure that the batteries are not
short-circuited. Do not throw batteries into the fire.

Operating Instructions

CAUTION

: Read, understand and follow Safety Rules and Operating Instructions

in this manual

before using this product.

WARNING:

Risk of Electrocution. Before use, always test the Magnet Detector

on a known live

circuit to verify proper operation

WARNING:

Risk of Electrocution. Keep hands and fingers on the body of the

probe and away

from the probe tip.

1. Press and hold the test switch and approach the testing area slowly with the

probe tip.

2. When a magnetic field is sensed by the ET30, the blue probe light will illuminate.

Solid light indicates a strong field; flickering light indicates a weak field.

3. To switch ON the flashlight .press and hold the flashlight switch

. Release the button

to switch the flashlight OFF. If the flashlight does not switch ON please check the
batteries. The battery compartment is located on the rear of the ET30.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Triplett Measuring Instruments Models

All Triplett Measuring Instruments