Page 2 - IMPORTANT SAFETY INSTRUCTIONS
1 IMPORTANT SAFETY INSTRUCTIONS Please read this user guide carefully and in full before installing and using the wine cellar. It is important that this guide is kept with the wine cellar for future reference. If the wine cellar is given to another person, make sure the user guide follows the wine c...
Page 3 - Informations générales et conseils
2 The meaning of these symbols in this user guide is outlined below. Important information about your personal safety and how to avoid damaging the wine cellar. General information and advice Environmental information Fire risk Risk of electric shock Informations importantes concernant votre sécurit...
Page 4 - GENERAL SAFETY; kitchen areas in an office or other business environments and
3 GENERAL SAFETY For your safety and the safety of others, please read these safety instructions carefully before installing and using your wine cellar. • This wine cellar is intended for domestic use or in similar settings such as: o kitchen areas in an office or other business environments; and o ...
Page 5 - For your safety, follow these installation recommendations:
4 • The refrigerant gas contained in this device is isobutane (R600a). It is a flammable gas. When transporting and installing the unit, be careful not to damage any part of the refrigeration system. • Do not use anything sharp to defrost the device. • Do not use any electrical appliance inside the ...
Page 6 - Check the plug and power cord regularly for damage.; WARNING
5 CHILD SAFETY This wine cellar may be used by children aged 8 years or older and by persons with reduced physical, sensory or mental abilities or lack of experience or knowledge, if they are properly monitored, or if instructions on the safe use of the wine cellar have been given and if the risks i...
Page 7 - grip them with wet hands.
6 ELECTRICAL SAFETY • Do not connect the wine cellar to a power outlet that is not protected from overloads. • Never use power boards with multiple sockets to connect the device. WARNING : Do not immerse the cord in water, handle the electrical components or grip them with wet hands. • The power soc...
Page 8 - Danger of Electrocution; careful not to block them.; : Do not use mechanical devices inside the wine cellar.; : Do not dismantle or otherwise damage the refrigeration system.; recommended by the manufacturer.
7 WARNING: Danger of Electrocution WARNING : The ventilation openings on the wine cellar's casing must remain uncovered. Be careful not to block them. WARNING : Do not use mechanical devices inside the wine cellar. WARNING : Do not dismantle or otherwise damage the refrigeration system. WARNING : Do...
Page 9 - INSTALLATION; This wine cellar is heavy. Be careful when moving it.; CLEANING; Do not use electrical appliances to clean your wine cellar.
8 INSTALLATION • This wine cellar is heavy. Be careful when moving it. • When transporting the wine cellar, be careful not to damage any part of the refrigeration system. • Important! Leave your device vertical for 24 hours before plugging it in for the first time so the refrigerant gas can equalise...
Page 10 - Summary
9 Summary IMPORTANT SECURITY WARNINGS Page 1 I DESCRIPTION OF THE APPLIANCE Page 10 II TECHNICAL CHARACTERISTICS Page 11 III INSTALLATION Page 13 A. Location Page 14 B. Unpacking the device and discarding the packaging items Page 14 C. Foot adjustment Page 15 D. Before loading the wine cellar Page 1...
Page 11 - I DESCRIPTION OF THE APPLIANCE; Temperature sensor
10 I DESCRIPTION OF THE APPLIANCE 1. Digital control panel & display 2. Fan 3. Shelves 4. Temperature sensor 5. Glass door 6. Adjustable foot 7.Carbon filter
Page 12 - Free standing
11 II TECHNICAL CHARACTERISTICS Item number TKV116VDN Model JC-210 Power supply 220-240 V Electric current 2.0A Power of the lamp 2W Dimensions W x D x H 545 x 600 x 1244 mm Weight 41kg Type of installation Free standing Door orientation Right (factory setting) Electrical scheme
Page 14 - III INSTALLATION; The location you have selected for your wine cellar should:
13 III INSTALLATION Recommendations: The location you have selected for your wine cellar should: • be well ventilated • be away from any source of heat and direct sunlight; • not be frequently wet (e.g. laundry, bathroom); • have a level floor; • have a reliable electricity supply; and • be away fro...
Page 15 - B. Unpacking the device and discarding the packaging.; Remove all packaging, as well as protective elements
14 A. Location To ensure adequate ventilation of the wine cellar, allow a minimum of 15 cm between the wine cellar and the nearby walls as shown in the illustration below. B. Unpacking the device and discarding the packaging. Remove all packaging, as well as protective elements inside the device's c...
Page 16 - Turn the adjustable foot by hand (be careful not to jam your fingers).; D. Before loading the wine cellar
15 C. Foot adjustment Your wine cellar is equipped with an adjustable foot to facilitate levelling. It is recommended to adjust the front feet to level the wine cellar. Correctly levelled feet will limit noise and vibration of the wine cellar. Turn the adjustable foot by hand (be careful not to jam ...
Page 17 - F. Change in the orientation of the door:; Making this change requires 2 people.
16 F. Change in the orientation of the door: The door can be right or left opening. Change the door by following the instructions below. Making this change requires 2 people. Instructions for changing the "right-hung" door and reassembling it so it is "left-hung": 1. Unplug the power...
Page 19 - We
18 IV BEFORE USE Wait 24 hours before starting your wine cellar. We recommend that you leave your wine cellar upright, clean it with soapy water and leave it open to eliminate residual odors. Recommendations: • Place the wine cellar in a cool place away from sunlight and heat sources. • Certain para...
Page 20 - You can load your wine bottles in single or double rows.; IMPORTANT INFORMATION ABOUT THE SERVING TEMPERATURE OF WINE
19 V USING YOUR wine cellar A. Loading your wine cellar • You can load your wine bottles in single or double rows. • For loading, take note of the following: if you don’t have enough bottles to completely fill your wine cellar, it’s best to spread the load over the entire height of the wine cellar t...
Page 21 - SETTING; bottles in the 1st row to prevent them from colliding with the 2nd
20 SETTING TYPES: Please note that depending on where your wine cellar is kept, how often the door is open, the ambient temperate and the loading, the time taken to reach the set temperate varies. Usually, it takes about 24 hours for the wine cellar to reach the desired temperature and indicate a st...
Page 22 - C. Adjustable shelves
21 The indoor fan helps keep the temperature consistent throughout the wine cellar. The wine cellar door should not be kept open for long periods of time as it will impact the wine cellar’s ability to remain cool. This wine cellar is called mono temperature, which means that you have a single choice...
Page 24 - D. Functions and temperature setting; Plug the power cord into a suitable power supply; Light; K1: This button allows you to turn on / off the inside light; Increase temperature
23 D. Functions and temperature setting Please note that depending on the selected settings and the loading, it can take 24 hours for the wine cellar to reach the desired temperature. • Plug the power cord into a suitable power supply • Set the thermostat to adjust the temperature using the K4 and K...
Page 25 - Attention
24 Decrease temperature K4: Press the button once, the LED display will flash indicating the current temperature. Press again to set the temperature. 1 touch will reduce the temperature by 1 degree. The blink stops after 5 seconds without action on your part, and the newly set temperature is recorde...
Page 27 - unless you change the thermostat setting.
26 F. Power outage In the event of a power outage, all temperature settings will be automatically preserved, unless you change the thermostat setting. A power outage of an hour or two will not affect the temperature of your wine cellar. To avoid a sudden change in temperature when the power supply i...
Page 28 - VI MAINTENANCE AND CLEANING; Before cleaning or restarting, unplug at the socket.
27 VI MAINTENANCE AND CLEANING A. Defrosting Your wine cellar is designed with a "natural" defrosting system. When the engine is shut down, the refrigerated surfaces of the wine cellar automatically defrost. The de-icing water descends into a drainage container near the compressor at the bac...
Page 33 - IX CAUTION; This wine cellar contains flammable foaming agents.
32 IX CAUTION For more information about disposing of your wine cellar, you can contact your local or regional government. Electronic products that have not been selectively sorted are potentially hazardous to the environment and human health due to the presence of hazardous substances This wine cel...
