Tricity Bendix SG211X - Manual

6 Use of appliance Before the First Use of the Cooker Remove all packaging both inside and outside of the cooker, before using it. Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal. 1. Remove the oven accessories and ...

7 Ignition Attention: when turning on the oven and grill burner the oven door has to be opened. • Open the oven door, push and turn the control knob to the left to position 8, keeping the control knob pressed. • At the same time, push the electronic ignition knob (see fig). Keep it pushed until the ...

12 For a correct ignition always keep the burner ring and the spark plugs clean. The following diameter pans can be used: Diameter (mm) Burner Power (kW) min. max. Rapid 3,00 160 280 Semi-Rapid 2,00 140 240 Auxiliary 1,00 120 180 Accessories delivered with the appliance The following accessories are...

13 Hints and Tips Condensation and steam When food is heated it produces steam in the same way as a boiling kettle. The oven vents allow some of this steam to escape. However, always stand back from the oven when opening the oven door to allow any build up of steam or heat to release. If the steam c...

14 Maintenance and cleaning The oven should be kept clean at all times. A build- up of fats or other foodstuffs could result in a fire. Before cleaning, ensure all control knobs are in the OFF position, and the appliance has cooled completely. Before any maintenance or cleaning can be carried out, y...

16 Something not working If the appliance is not working correctly, please carry out the following checks, before contacting your local Service Force Centre. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be...

18 Guarantee conditions Standard Guarantee Conditions We Zanussi-Electrolux undertake that if, within 12 months of the date of the purchase, this Zanussi- Electrolux appliance or any part thereof is proved to be defective by any reason only of faulty workmanship or materials, we will, at our option,...

19 Instructions for the installer Technical features Free standing Class 1 Hob Pan support Front right burner Back right burner Front left burner Back left burner Hob ignition Enamelled Semirapid Semirapid Rapid Auxiliary 2000 W 2000 W 3000 W 1000 W Spark Oven Oven Oven burner power Grill Grill burn...

20 Advice for safety Gas connections • Before installation ensures that the local distribution conditions (gas type and pressure) and the pre-setting of the appliance are consistent. • This appliance must be installed only in a room with good ventilation. • This appliance must not connect to a chimn...

22 Installation Location of appliance The appliance must not be installed in a bed-sitting room of volume less than 20m 3 or in a bathroom or shower room. It is essential that the appliance is positioned as in the enclosed figure i.e. shelves, wall cabinets and cooker hoods must be fitted a minimum ...

23 Levelling The appliance is provided with adjustable small feet placed in the back and front corners of the base. By adjusting the small feet it is possible to change the height of the appliance so as to ensure a better levelling with other surfaces and a uniform distribution of the liquids contai...

25 Conversion of gas Your cooker is designed to work with natural gas, and is convertible for use with propane or butane. The LPG conversion kit is available from your Service Force Centre and must be fitted by a Corgi Registered engineer. For changing the gas type it is necessary to: • replace the ...

26 Replace the nozzles of the hob burners Before any modifications or conversion to a kind of different gas, you must DISCONNECT the cooker from the electricity supply and ensure that all control knobs are in the OFF position, and the appliance has cooled completely. Hob burners • Remove the pan sup...