Transcend TS0MFLRD6E - Manual

Page 2 - Table of Contents

Table of Contents Introduction Package Contents ................................................................................................................ 1 Features ...................................................................................................................................

Page 3 - Introduction; Package Contents; Features

1 Introduction Thank you for purchasing Transcend’s Internal 6-in-1 Card Reader , a small device de- signed for fast, easy data exchange using six types of storage media: CompactFlash  , IBM Microdrive™, SmartMedia  , Secure Digital, MultiMediaCard™, and Memory Stick ® / PRO. Designed to fit in an...

Page 4 - Driver Installation; Driver Installation for Windows 98SE, Me, and 2000

2 Driver Installation Driver Installation for Windows 98SE, Me, and 2000 1. Power on the computer where you will install the Internal 6-in-1 Card Reader and make sure the USB port is enabled and working properly. NOTE: Do not plug your Internal 6-in-1 Card Reader into the USB port at this time. 2. I...

Page 6 - Driver Installation for Windows XP, Linux Kernel 2.4 or Later; Hardware Setup

4 Driver Installation for Windows XP, Linux Kernel 2.4 or Later No driver is needed. Turn off the computer and refer to Hardware Setup below to install the Internal 6-in-1 Card Reader into your PC. Hardware Setup 1. Install the Internal 6-in-1 Card Reader into an available 3.5” drive bay. 2. Find th...

Page 9 - To Use with Windows XP

7 2. Four Removable Disk drives with newly assigned drive letters appear in My Com- puter. The Internal 6-in-1 Card Reader is ready for use. To Use with Windows XP 1. Power on the computer. The Found New Hardware status message appears (the first time you power on the computer after installing the I...

Page 10 - To Use with Linux Kernel 2.4 or Later; To Safely Remove Memory Cards; To Remove in Windows

8 To Use with Linux Kernel 2.4 or Later The Internal 6-in-1 Card Reader is a driver-free device for Linux kernel 2.4 or later. Just follow the procedures below to mount and use it. 1. Power on the computer and insert a memory card into the Internal 6-in-1 Card Reader. 2. Create a directory for the I...

Page 11 - To Boot-up with Pheonix or Award BIOS

9 Boot-up Function The CompactFlash slot of the Internal 6-in-1 Card Reader can be configured as a bootable drive. To enable the Boot-Up function, your motherboard must support USB boot-up de-vices. Upon completion of the appropriate procedure for your BIOS as described below, a CompactFlash card ca...

Page 12 - To Boot-up with AMI BIOS

10 To Boot-up with AMI BIOS 1. Power on your system and follow the on-screen instructions to enter BIOS or the CMOS setup utility. 2. Refer to the owner’s manual of your motherboard for details about the configuration program for your system. 3. Enter the CMOS Setup Utility main page, select Integra...

Page 14 - Specifications

12 Specifications Power supply............................................... DC 5V from USB port Slots for storage media: .............................. CompactFlash Card Type I/II IBM Microdrive SmartMedia Card Secure Digital Card MultiMediaCard Memory Stick / PRO Operating Temperature ..............

Page 15 - Card Reader Limited Warranty

Card Reader Limited Warranty “Above and beyond” is the standard we set ourselves for customer service at Transcend. We consistently position ourselves to be significantly above the industry norm. It’s all part of our commitment to Customer Satisfaction. All Transcend Information, Inc. (Transcend) pr...

Transcend TS0MFLRD6E - Manual

Table of Contents:

Summary

Other Transcend Models