Page 2 - Table of Contents
2 Table of Contents Introduction ︱ .........................................................................................................................3 Package Contents ︱ ...............................................................................................................3 Features ︱...
Page 3 - Introduction; StoreJetTM 35 Ultra; Package Contents
3 Introduction ︱ Congratulations on purchasing Transcend’s StoreJet™ 35 Ultra . This advanced, eSATA / USB 2.0 external storage device is the perfect way to add an extra hard drive to your computer for downloading, storing, transferring and backing up your data. With both eSATA and USB 2.0 connectio...
Page 4 - Features; elite
4 Power Adapter Power Cable Vertical Stand Quick Installation Guide Mounting Screws x 4 Features ︱ Works with all 3.5” SATA hard drives Two connection options: eSATA or USB2.0 eSATA for maximum performance up to 3000Mb/s USB2.0 interface assures universal compatibility Silent 80mm cooling fan reduce...
Page 5 - General Use; StoreJet 35 Ultra, rectangular end; Backing Up Data
5 System Requirements ︱ Desktop computer with a working eSATA or USB port. One of the following operating systems: Windows ® 2000 Windows ® XP Windows VISTA™ Mac ® OS 9.0, or later (USB only) Mac ® OS 10.4, or later (eSATA) Linux ® Kernel 2.4, or later (USB only) Safety Precautions ︱ The...
Page 6 - Always follow the procedures in the “; Disconnecting from a Computer; ” section to remove your StoreJet 35
6 how to check this, please consult your computer or motherboard User’s Manual for eSATA or USB driver information. Power • The StoreJet 35 Ultra is powered from your home’s power outlet using the included Power Adapter. • Ensure nothing is resting on the power cables and that the cables are not loc...
Page 7 - Product Overview; DC Power Input
7 Product Overview ︱ B A A A A A A A A C G D E F A Case Screws (4 per side) B On/Off Switch C DC Power Input D eSATA Port E USB Port F Cooling Fan G LED Indicator Light
Page 8 - Installing a Hard Drive; Connect the hard drive to the StoreJet 35 Ultra by; gently; sliding it towards the circuit board’s SATA; Do NOT connect the hard drive at an angle,
8 Installing a Hard Drive ︱ The StoreJet 35 Ultra hard drive enclosure only works with 3.5” SATA Hard Disk Drives. Installing a Hard Drive If you purchased a Transcend StoreJet 35 Ultra hard drive enclosure that does not have a SATA hard disk drive already installed, please read this section for ins...
Page 10 - Connecting to a Computer; The StoreJet 35 Ultra can be connected to your computer in two ways:; Windows
10 Connecting to a Computer ︱ The StoreJet 35 Ultra can be connected to your computer in two ways: USB 2.0 or eSATA. To get the best performance results from your hard drive, we strongly recommend using the eSATA interface. If your computer does not have an eSATA port, you may need to purchase an SA...
Page 11 - Windows VistaTM; existing hard drive
11 6. If you installed an existing hard drive into the StoreJet 35 Ultra that was previously used with a Windows® 2000/XP/Vista™ computer, a new Local Disk with a newly assigned drive letter representing the StoreJet 35 Ultra will automatically appear in the My Computer window under “Hard Disk Drive...
Page 12 - brand new hard drive; Mac
12 Note: the drive name and letter in your "AutoPlay" window may differ 7. If you installed a brand new hard drive into your StoreJet 35 Ultra, please follow the instructions in the Formatting the Hard Drive section to prepare your disk for use with your Vista ® system. Mac ® OS 1. Connect t...
Page 13 - Linux
13 Linux ® 1. Connect the power cable to the Power Adapter and plug it into your home’s power outlet. Then connect the Power Adapter to the StoreJet 35 Ultra’s round-shaped DC power input jack. 2. Plug the square-shaped end of the USB cable into the StoreJet 35 Ultra. 3. Plug the other end of the US...
Page 15 - In the; Policies; tab, ensure that the “; Enable write caching; ” option is not checked.
15 4. In the Policies tab, ensure that the “ Enable write caching ” option is not checked.
Page 16 - Execute
16 Mac ® OS (USB & eSATA) Drag and drop the Disk icon that represents your StoreJet 35 Ultra into the trashcan. Then unplug your StoreJet 35 Ultra from the USB port and turn off its power switch. Linux ® Kernel 2.4, or Later (USB) Execute umount /mnt/Storejet to un-mount the device. Then unplug ...
Page 17 - Formatting the Hard Drive; Please use the USB interface (not eSATA) to format the drive.; Unplug all other USB storage devices from your computer; StoreJet 35 Ultra; Start
17 Formatting the Hard Drive ︱ WARNING! Formatting the disk will erase all of the data on your StoreJet 35 Ultra. Please use the USB interface (not eSATA) to format the drive. You must have Administrator Rights in order to format in Windows 2000, XP, or Vista. Windows ® 2000/XP 1. Plug the StoreJet ...
Page 18 - Unplug all other USB storage devices from your computer.
18 Windows Vista™ 1. Plug the StoreJet 35 Ultra into an available USB port on your Windows Vista ™ computer. 2. Unplug all other USB storage devices from your computer. This is to prevent accidental format of a different USB drive. 3. Insert the included Software CD into your computer’s CD-ROM drive...
Page 19 - The program will automatically detect the; Press “; The format process may take a few minutes. When complete, an “
19 7. The program will automatically detect the StoreJet 35 Ultra drive. 8. Press “ Start ”. 9. The format process may take a few minutes. When complete, an “ O.K. ” message will appear in the bottom right hand corner of the window.
Page 20 - Close; Unplug all other external storage devices from your computer.
20 10. Click the “ Close ” button to finish and exit. Mac ® OS 1. Plug the StoreJet 35 Ultra into an available USB port on your MAC computer. 2. Unplug all other external storage devices from your computer. This is to prevent accidental format of a different drive. 3. Click the “Initialize” button. ...
Page 22 - Unplug all other USB storage devices from your computer.
22 10. Click the “ C lose” button to finish and exit. Linux ® 1. Plug the StoreJet 35 Ultra into an available USB port on your Linux computer. 2. Unplug all other USB storage devices from your computer. This is to prevent accidental format of a different USB drive. 3. Type fdisk /dev/sda (replace /d...
Page 23 - Troubleshooting; Device Manager; Advanced Host Controller Interface (AHCI)
23 Troubleshooting ︱ If a problem occurs with your StoreJet 35 Ultra, please first check the information listed below before taking your StoreJet 35 Ultra in for repair. If you are unable to remedy a problem from the following hints, please consult your dealer, service center, or local Transcend bra...
Page 25 - Specifications; DC input: 12V/5V via Switching Power Adapter; Ordering Information; Device Description Capacity
25 Specifications ︱ Size (L x W x H): 193.00mm × 127.00mm × 48.00mm Weight: 325g (without hard drive) Storage Media: 3.5” SATA Hard Disk Drive (not included) Power Supply: AC input: 100V-240V DC input: 12V/5V via Switching Power Adapter Max. Transfer Speed: eSATA: 3.0Gbits per second USB 2.0: 480Mbi...
Page 26 - Transcend Limited Warranty; All
26 Transcend Limited Warranty ︱ “Above and Beyond” is the standard we set ourselves for customer service at Transcend. We consistently position ourselves to be significantly above the industry norm, which is all part of our commitment to Customer Satisfaction. All Transcend information, Inc. (Transc...
