Page 2 - Table of Contents; Linux
Table of Contents Introduction ︱ ...................................................................................... 1 Package Contents ︱ ............................................................................ 1 Features ︱ ........................................................................
Page 3 - Introduction; StoreJet; Package Contents
Introduction ︱ Congratulations on purchasing Transcend’s StoreJet ™ 25P . This lightweight, ultra-portable, high-speed USB storage device is the perfect data management system for uploading, downloading, storing and transferring your vital data and information. With its huge storage capacity and fas...
Page 4 - Quick Start Guide
1 Mini USB to 2 Standard-A USB cable (USB Y cable) Quick Start Guide 2
Page 5 - Features; System Requirements
Features ︱ Racing-inspired lightweight slim design with checkered aluminum front panel Protective soft travel pouch Slide-open case for easy hard drive installation and removal High-speed USB 2.0 compliant and backwards compatible with USB 1.1 Easy Plug and Play operation – no drivers required Compl...
Page 6 - Safety Precautions; computer correctly (small end; General Use; operation; Transporting
Safety Precautions ︱ These usage and safety guidelines are IMPORTANT! Please follow them carefully. Please ensure that you connect the USB cable to the StoreJet 25 and your computer correctly (small end Æ StoreJet 25, large end Æ PC) General Use • Carefully unpack the contents of the StoreJet 25 pac...
Page 7 - use a cable that is frayed or damaged.; Reminders; Always follow the procedures in the “; Disconnecting from a Computer; ” section to remove the
The spare USB connector can provide additional power for the StoreJet 25 when needed • Please use the Mini USB to USB A-Type cable that came with the StoreJet 25 to connect it to a computer, and always ensure that the cable you are using is in good condition. NEVER use a cable that is frayed or dama...
Page 8 - Product Overview; Case Screw
Product Overview ︱ Figure 1: StoreJet 25P Case Screw Mini USB Port 6
Page 9 - Installing a Hard Drive; Use a small Phillips screwdriver to remove the case screw; Gently
Installing a Hard Drive ︱ The StoreJet 25 hard drive enclosure only works with 2.5” SATA Hard Disk Drives. Installing a Hard Drive If you purchased a Transcend StoreJet 25 hard drive enclosure that does not have an SATA hard disk drive already installed, please read this section for installation ins...
Page 11 - Connecting to a Computer; necessary to run the drive.
Connecting to a Computer ︱ If you want to use the StoreJet 25 as an external hard drive to upload/download data to and from your computer, you will need to connect it to a USB port on the computer using the provided USB Y-cable. Figure 2: Mini USB to Standard-A USB cable (USB Y-cable) 1. Plug the sm...
Page 13 - Windows; Select the; Hardware; icon on the system tray.; Safely Remove Hardware; A window will appear stating,; “The ‘USB Mass Storage Device’ device can now be safely; from Windows; Mac; StoreJet 25 from the USB port.
Disconnecting from a Computer ︱ NEVER disconnect the StoreJet from a Computer when its LED is flashing. Windows ® 2000, XP and Windows Vista™ 1. Select the Hardware icon on the system tray. 2. The Safely Remove Hardware pop-up window will appear. Select it to continue. Figure 5: Safely Remove Hardwa...
Page 14 - Execute
Figure 7: Drag StoreJet 25 drive icon into the Trashcan Linux ® Kernel 2.4 or Later Execute umount /mnt/Storejet to un-mount the device. Then unplug your StoreJet 25 from the USB port. 12
Page 15 - Formatting the Hard Drive; Unplug all other USB storage devices from your computer
Formatting the Hard Drive ︱ WARNING! Formatting the disk will erase all of the data on your StoreJet 25. You must have Administrator Rights to format in Windows 2000, XP, or Vista. Windows ® 2000/XP 1. Plug the StoreJet 25 into an available USB port on a Windows ® 2000/XP computer. 2. Unplug all oth...
Page 16 - Close; Unplug all other USB storage devices from your computer.
Figure 9: Press “Start” 7. The format process may take a few minutes. When complete, an “ O.K. ” message will appear in the bottom right hand corner of the window. Figure 10: Format Complete 8. Click the “ Close ” button to finish and exit. Windows Vista™ 1. Plug the StoreJet 25 into an available US...
Page 17 - The User Account Control window will appear. Select “; Allow; The program will automatically detect the StoreJet 25 drive.
Figure 11: Run as administrator 6. The User Account Control window will appear. Select “ Allow ” to continue. Figure 12: Allow Transcend’s StoreJet Format Utility to run in Vista 7. The program will automatically detect the StoreJet 25 drive. 15
Page 18 - Press; “Start”; The format process may take a few minutes. When complete, an “
Figure 13: The Utility will automatically detect the StoreJet 25 drive 8. Press “Start” . Figure 14: Press “Start” 9. The format process may take a few minutes. When complete, an “ O.K. ” message will appear in the bottom right-hand corner of the window. 16
Page 19 - Unplug all other external storage devices from your computer.
Figure 15: Format Complete 10. Click the “ Close ” button to finish and exit. Mac ® OS 1. Plug the StoreJet 25 into an available USB port on your MAC computer. 2. Unplug all other external storage devices from your computer. This is to prevent accidental format of a different drive. 3. Click the “In...
Page 22 - Troubleshooting; The Software CD does not auto-run in Windows; Device Manager; My operating system cannot detect the StoreJet 25; Spare USB connector provides additional power.; My computer does not recognize the StoreJet 25; both
Troubleshooting ︱ If a problem occurs with your StoreJet 25, please first check the information listed below before taking your StoreJet 25 in for repair. If you are unable to solve a problem from the following hints, please consult your dealer, service center, or local Transcend branch office. We a...
Page 23 - I cannot detect the StoreJet 25 in Linux; erase all existing data on the drive.
The StoreJet 25 does not Power-ON Check the following: 1. Ensure that the StoreJet 25 is properly connected to the USB port(s) on your computer. 2. Ensure that the USB port is working properly. If not, try using an alternate USB port. I cannot detect the StoreJet 25 on my Mac ® If you installed a dr...
Page 24 - Specifications; Storage Media; 80Mbits per second; Operating Temperature; Ordering Information; Device Description
StoreJet™ 25P Specifications ︱ Size (L x W x H) 127.4mm × 81.25mm × 14.5mm Weight (with hard drive) 158g Storage Media 2.5-inch SATA Hard Disk Drive Power Supply 5V DC supplied from the USB port(s) Max. Transfer Speed 480Mbits per second Operating Temperature 5 ℃ (41 ℉ ) to 55 ℃ (131℉) Certificates ...
Page 25 - Transcend Limited Warranty; part of our commitment to Customer Satisfaction.
Transcend Limited Warranty ︱ “Above and Beyond” is the standard we set ourselves for customer service at Transcend. We consistently position ourselves to be significantly above the industry norm, which is all part of our commitment to Customer Satisfaction. Please do not break or remove the warranty...
Page 26 - *All logos and marks are trademarks of their respective companies.
*The Transcend logo is a registered trademark of Transcend Information, Inc. *All logos and marks are trademarks of their respective companies. 24
