Page 2 - Table of Contents; StoreJet
1 Table of Contents Introduction ......................................................................................... 1 Package Contents ............................................................................................................. 1 Features ........................................
Page 3 - Introduction; Package Contents
1 Introduction Congratulations on purchasing Transcend ’s StoreJet ™ 2.5 . This tiny, Ultra-portable, Hi-Speed USB storage device is the perfect data management system for uploading, downloading, storing and transferring your vital data and information. With a huge storage capacity and Hi-Speed USB ...
Page 4 - Features; Transcend Elite; System Requirements
2 Features • Hi-Speed USB 2.0 compliant and USB 1.1 backwards compatible • Easy Plug and Play installation • Optional 2.5” Hard Disk Drive • Ultra-Portability • OneTouch Auto-Backup function • Powered via the USB port. No external power or battery needed • Hi-Speed data transfer rates up to 480Mbits...
Page 5 - Safety Precautions; General Use
3 Safety Precautions These usage and safety guidelines are IMPORTANT! Please follow them carefully. Your StoreJet ™ 2.5 is connected to a computer using a Mini USB (on the StoreJet ™ ) to USB A-Type (on a Desktop, Notebook) cable. Please ensure that you connect the cable ends to the ports correctly....
Page 6 - Reminders; Disconnecting from a Computer; Safety
4 • Please use the Mini USB to USB A-Type cable that came with the StoreJet ™ 2.5 to connect it to a computer, and always ensure that the cable you are using is in good condition. NEVER use a cable that is frayed or damaged. • Ensure nothing is resting on the USB cable and that the cable is not loca...
Page 7 - Screws x 2; Product Overview
5 Product Overview Figure 1. StoreJet 2.5 Screws x 2 Mini USB Port OneTouch Auto-Backup Button Product Overview
Page 8 - Installing a Hard Drive; NOT; Installing a Hard Drive
6 Installing a Hard Drive Installing a Hard Drive If you purchased a StoreJet ™ 2.5 that does not have a Hard Disk Drive already installed, please read this section, otherwise you can skip to the “ Driver Installation ” section. 1. Open the StoreJet ™ 2.5 by removing the two screws from either side ...
Page 11 - Driver Installation; Driver Installation for Windows; Driver Installation for Linux
9 Driver Installation Driver Installation for Windows ® 2000, XP and Vista No drivers are required. These Windows ® Operating Systems have built-in drivers to support the StoreJet ™ 2.5 . Plug your StoreJet ™ into an available USB port and Windows will install the necessary files. A new Local Disk d...
Page 12 - Connecting to a Computer; Use with a Computer; Small End
10 Connecting to a Computer If you want to use the StoreJet ™ 2.5 as an External Hard Disk Drive to upload/download data to, or from your computer you will need to connect it to a USB port on the computer using the provided . Figure 7. Mini USB to USB A-Type Cable (USB Y cable) 1. Plug the small end...
Page 14 - Removing the StoreJet
12 Disconnecting from a Computer NEVER disconnect the StoreJet ™ from a Computer when its LED is flashing. Removing the StoreJet ™ 2.5 in Windows ® 2000, XP and Vista 1. Select the Hardware icon on the system tray. 2. The Safely Remove Hardware pop-up window will appear. Select it to continue. Figur...
Page 15 - Formatting the Hard Drive; Windows; Unplug all other USB storage devices from your computer
13 Formatting the Hard Drive WARNING! Formatting the disk will erase all of the data on your StoreJet 25. You must have Administrator Rights to format in Windows 2000, XP, or Vista. Windows ® 2000/XP 1. Download the StoreJet Format Utility from Transcend’s online Download Center at http://www.transc...
Page 16 - Close; Unplug all other USB storage devices from your computer.
14 8. A confirmation window will appear. Press OK to begin formatting the drive. 9. The format process may take a few minutes. When complete, an “ O.K. ” message will appear in the bottom right hand corner of the window. 10. Click the “ Close ” button to finish and exit. Windows Vista™ 1. Download t...
Page 17 - “StoreJetFormatter.exe; Allow
15 different USB drive. 5. Right-click “StoreJetFormatter.exe ” and select “Run as Administrator.” 6. The User Account Control window will appear. Select “ Allow ” to continue. 7. In the StoreJet Format Utility window, click the “Refresh” button. 8. The program will automatically detect the StoreJet...
Page 18 - “Start”
16 9. Press “Start” . 10. A confirmation window will appear. Press OK to begin formatting the drive. Use with a Computer Use with a Computer
Page 20 - Operating system cannot detect the StoreJet; Troubleshooting
18 Troubleshooting If a problem occurs with your StoreJet ™ 2.5 , please first check the information listed below before taking your StoreJet ™ 2.5 for repair. If you are unable to solve a problem from the following hints, please consult your dealer, service center, or local Transcend branch office....
Page 21 - Cannot detect the StoreJet
19 The StoreJet ™ 2.5 ’s internal hard drive comes formatted for FAT32. If you want to backup a Mac computer you will need to format the drive for HFS+ using the Mac Disk Utility. Cannot detect the StoreJet ™ 2.5 in Linux The StoreJet ™ 2.5’s internal hard drive comes formatted for FAT32. Linux CANN...
Page 22 - Specifications; Operating Temperature:
20 StoreJet ™ 2.5 IDE series Specifications Ordering Information Device Description Memory Size Transcend P/N StoreJet ™ 2.5 Silver 0GB TS0GSJ25S StoreJet ™ 2.5 Red 0GB TS0GSJ25R Specifications • Size (L x W x H): 129 mm × 79.9 mm × 13 mm • Weight: 88g (without hard drive) • Storage Media: 2.5-inch ...
Page 25 - Transcend Limited Warranty; Warranty
23 Transcend Limited Warranty “Above and Beyond” is the standard we set ourselves for customer service at Transcend. We consistently position ourselves to be significantly above the industry norm, which is all part of our commitment to Customer Satisfaction. Please do not break or remove the warrant...
