Page 2 - A Complete Line of Wall Fin
© 2001 American Standard Inc. All rights reserved. FIN-PRC004-EN A Complete Line of Wall Fin Trane architectural wall fin is ideal forheating modern commercial,institutional or industrial buildings.Attractive styling and wide applicationflexibility allow wall fin cabinet designsto be used for virtua...
Page 3 - Contents; Architecural Wall Fin
3 Contents FIN-PRC004-EN Architecural Wall Fin Features and Benefits Application Considerations Selection Procedure Performance Data Dimensional Data Options Mechanical Specifications Security Wall Fin Features and Benefits Accessories Model Number Description Performance and General Data Dimensiona...
Page 5 - Positive Temperature Control; Reduces unit capacity by 70 percent.
5 FIN-PRC004-EN Features andBenefits Hydronic Heating Elements — Copper/Aluminum and Steel Copper-Aluminum Elements 3 / 4 ”, 1” and 1 1 / 4 ” (19 mm, 25 mm and 32 mm) Copper Tubes With 40, 50 or 58Aluminum Fins per foot (131, 164 190per meter). Positive Temperature Control • Efficient element-mounte...
Page 6 - A Heating System and Style to Suit Any Application; See pages 13 through 43 and Tables
FIN-PRC004-EN 6 ApplicationConsiderations A Heating System and Style to Suit Any Application Wall Mounted Front Outlet Slope Top Outlet Top Outlet F S T TA Top Outlet With Extruded Grille Type E Type X Enclosure styles meet the heating needsof long, open areas in any interior. • Wall-mounted wall fi...
Page 8 - ENGLISH
FIN-PRC004-EN 8 SelectionProcedure Chart S-1 — Water Velocity CorrectionFactors — Pressure Drops ENGLISH All Catalog Capacities Based On 3.0Feet Per Second Water Velocity.* Water Velocity *Correction Factor = .04 ( 3 ) SI
Page 9 - Table S-2 — Wall Fin Rating Correction Factors*
9 FIN-PRC004-EN Effect of Temperature Drop OnFin-Tube Ratings The effect of temperature drop on heatoutput of a wall fin element can bereadily determined. Select the heatingelement using average watertemperature (entering watertemperature minus 1 / 2 water temperature drop) and correct for watervelo...
Page 11 - Actual installed height is 19; Determining Pressure Drop
11 FIN-PRC004-EN Example A 12S enclosure is to be installed 6”above the recommended installedheight. Compute the new capacity rating: Wall Fin Correction Factors Selection 1 Actual installed height is 19 7 / 32 ” (13 7 / 32 ” from Table PD-8 + 6” (152 mm) ).Interpolating from Table S-5, the heatinge...
Page 12 - Maximum Installed Lengths
FIN-PRC004-EN 12 SelectionProcedure For headered two-row elementinstallations (elements piped in parallel),the maximum capacity from Table S-6 canbe doubled. For water temperature drop other than20°F (-6.7C), the maximum capacity maybe determined as follows: Maximum Capacity = Max. Cap. (Table S-6) ...
Page 13 - Provisions For Expansion; Chart S-2— Expansion in Steel Elements and Steel Pipe
13 FIN-PRC004-EN SelectionProcedure Provisions For Expansion Copper tube wall fin elements andcopper tubing, when installed at 40°F(4.4°C) and operated at 200°F (93°C)average water temperature, will expandas much as 1 / 8 ” (3.2 mm) in each 10’ (3 m) length. Provisions must be made toaccommodate thi...
Page 14 - Bare Element Capacities
FIN-PRC004-EN 14 PerformanceData Table PD-1 — Ratings of Wall Fin Copper/Aluminum Elements Without Enclosures Steam Capacity Hot Water Capacity Per Ft.-1 Psi at 65°F Air Btu/Hr./Ft. — At 65°F Air, Average Water Temperature Per Meter - 6.895 kPa Watts/Meter — At 18.3°C Air, Average Water Temperature ...
Page 18 - Table PD-3 — Ratings of Wall Fin Steel Elements Without Enclosures; Metric Conversions
FIN-PRC004-EN 18 PerformanceData Table PD-3 — Ratings of Wall Fin Steel Elements Without Enclosures Steam Capacity Hot Water Capacity Per Ft.-1 Psi at 65°F Air Btu/Hr./Ft. — At 65°F Air, Average Water Temperature Per Meter - 6.895 kPa Watts/Meter — At 18.3°C Air, Average Water Temperature at 18.3°C ...
Page 41 - Table DD-1 — Type S — Enclosure Dimensions
41 FIN-PRC004-EN DimensionalData Table DD-1 — Type S — Enclosure Dimensions Enclosure Depth 4” (102) 6” (152) 3 1 / 4 ” x 3 1 / 4 ” 3 1 / 4 ” x 5 1 / 4 ” 2 1 / 2 ” x 5 1 / 4 ” Fin Size (83 x 83) Alum. (83 x 133) Alum. (64 x 133) Steel Tube Size 3 / 4 ” (19) Cu. 1” (25) Cu. 1 1 / 4 ” (32) Cu. 1 1 / 4...
Page 42 - Table DD-2 — Type F — Enclosure Dimensions
FIN-PRC004-EN 42 DimensionalData FrontOutlet Table DD-2 — Type F — Enclosure Dimensions Enclosure Depth 4” (102) 6” (152) 3 1 / 4 ” x 3 1 / 4 ” 3 1 / 4 ” x 5 1 / 4 ” 2 1 / 2 ” x 5 1 / 4 ” Fin Size (83 x 83) Alum. (83 x 133) Alum. (64 x 133) Steel Tube Size 3 / 4 ” (19) Cu. 1” (25) Cu. 1 1 / 4 ” (32)...
Page 43 - Table DD-3 — Type T — Enclosure Dimensions
43 FIN-PRC004-EN DimensionalData TopOutlet Table DD-3 — Type T — Enclosure Dimensions Enclosure Depth 4” (102) 6” (152) 3 1 / 4 ” x 3 1 / 4 ” 3 1 / 4 ” x 5 1 / 4 ” 2 1 / 2 ” x 5 1 / 4 ” Fin Size (83 x 83) Alum. (83 x 133) Alum. (64 x 133) Steel Tube Size 3 / 4 ” (19) Cu. 1” (25) Cu. 1 1 / 4 ” (32) C...
Page 44 - Table DD-4 — Type TA — Enclosure Dimensions
FIN-PRC004-EN 44 DimensionalData TopOutlet – TA Table DD-4 — Type TA — Enclosure Dimensions Enclosure Depth 4” (102) 6” (152) 3 1 / 4 ” x 3 1 / 4 ” 3 1 / 4 ” x 5 1 / 4 ” 2 1 / 2 ” x 5 1 / 4 ” Fin Size (83 x 83) Alum. (83 x 133) Alum. (64 x 133) Steel Tube Size 3 / 4 ” (19) Cu. 1” (25) Cu. 1 1 / 4 ” ...
Page 45 - Table DD-5 — Enclosure Dimensions, Type E; Wall Mounted; Table DD-6 — Inside and Outside Corners; Floor Mounted
45 FIN-PRC004-EN DimensionalData Type — E, E3 AndE3-2W Dimensions Table DD-5 — Enclosure Dimensions, Type E Enclosure Type 3E 4E 3 1 / 4 ” x 3 1 / 4 ” 3 1 / 4 ” x 5 1 / 4 ” 2 1 / 2 ” x 5 1 / 4 ” Fin Size (83 x 83) Alum. (83 x 133) Alum. (64 x 133) Steel Tube Size 3 / 4 ” (19) Cu. 1” (25) Cu. 1 1 / 4...
Page 51 - Figure DD-1 — Element and Pipe Support Spacing; Standard Cabinet And Element Mounting Locations
51 FIN-PRC004-EN Enclosure Tube F J K Height A Size E Min. Max. Min. Max. Min. Max. 12” (305) 10” (254) 16” (406) 14” (356) 3 / 4 CA 2 13 / 16 8 3 / 16 (208) 8 3 / 16 (224) 2 5 / 16 3 13 / 16 N/A N/A 20” (508) 18” (457) (19) (71) (59) (97) 7 13 / 16 (198) 24” (610) 22” (559) 10 5 / 16 (262) 11 13 / ...
Page 52 - TYPE X ENCLOSURE; Element Dimensions – Table DD-7
FIN-PRC004-EN 52 DimensionalData TYPE X ENCLOSURE WALL HANGERAND CEILING HANGER Type X enclosure ratings are 3 percentless than bare element ratings. Made of18-gauge (1.2 mm thickness) steel,cleaned, phosphatized and finished instandard prime baked enamel finish.Also available in choice of six baked...
Page 53 - Table DD-7 — Wall Fin Element Dimensions
53 FIN-PRC004-EN Table DD-7 — Wall Fin Element Dimensions 3 / 4 ” (19) , 1” (25 mm) Or 1 1 / 4 ” (32) 1 1 / 4 ” (32) Copper Copper 1 1 / 4 ” (32) Aluminum Aluminum Steel Series Series Series Dimension 40-50-58 40-50-58 52 A 3 1 / 4 ” (83) 5 1 / 4 ” (133) 5 1 / 4 ” (133) B 3 1 / 4 ” (83) 3 1 / 4 ” (8...
Page 54 - Options; Special Purpose Accessories
FIN-PRC004-EN 54 Options Type T — Top Outlet Wall Fin EnclosureShown Dirt Guard Gasket Fastens to back of the mountingstrip to prevent wall streaking. Enclosure Extensions Enclosure extensions are designed toprovide additional length to standardenclosures on wall-to-wall installations orwhen additio...
Page 55 - Mullion Channel; Pilaster Assembly
55 FIN-PRC004-EN Options Access Panel To gain access inside theWall Fin enclosure tovalves. Access Panel with AccessDoor 12” (305) long with a 5” (127)x 6” (152) access door to gainaccess to valves. Mullion Channel Table O-1 — Pilaster Assembly Dimensions Dimension No. 5 No. 11 No. 17 A 5” (127) 11”...
Page 57 - Specifications; Enclosure depth of 10; Accessories
57 FIN-PRC004-EN MechanicalSpecifications Type E3A-1W and E3A-2Wwith Aluminum Air OutletGrilles Specifications Natural convection with extrudedaluminum air out grille(s). Pedestal floormounted wall fin shall be furnished tomeet the specified capacity. Enclosuresetc., heating elements and accessories...
Page 60 - Installation Layout for Pedestal Mount E3A-1W One Wide Enclosure
FIN-PRC004-EN 60 MechanicalSpecifications Recommended Schedule and InstallationProcedure1. Layout job selecting enclosure lengths with appropriate wall sleeve at each joint.Space enclosures to suit. At end of runuse wall sleeve or 3” (76 mm) end to suitjob. 2. Layout pedestal bracket assembly so the...
Page 62 - Table M-3 — Ratings, Type E3A-1W Enclosure With Steel Elements
FIN-PRC004-EN 62 MechanicalSpecifications Table M-2 — Ratings, Type E3A-1W Enclosure With Copper Aluminum Elements Steam Capacity Per Ft.-1 Psi at 65°F Air Hot Water (Avg.) Tube Encl. Mtg. Per Meter - 6.895 kPa 200°F 190°F 180°F 170°F 160°F 150°F 140°F 130°F Size Fin Fin Fin Height Height at 18.3°C ...
Page 64 - furnished in heights of 19; Dampers; End caps 8
FIN-PRC004-EN 64 MechanicalSpecifications Type DS Double SlopeWall Mounted Specifications Natural convection double slope wallmounted. Wall fin shall be furnished tomeet the specified capacity. Enclosuresetc., heating elements and accessoriesshall be installed in accordance with themanufacture’s rec...
Page 67 - Model DS Double Slope Top Installation and Accessory Details
67 FIN-PRC004-EN MechanicalSpecifications Model DS Double Slope Top Installation and Accessory Details End (Overlapping) Enclosure 8 3 / 8 ” (213 mm) 3” (76 mm) End (Overlapping) Inside Corner (Overlapping) Encl osur e Se ction s in Stan dard Len gths 8 3 / 8 ” (213 mm) 8 3 / 8 ” (213 mm) 8 3 / 8 ” ...
Page 68 - ” (135 mm) Deep, Type DS Enclosure With Copper Aluminum Elements
FIN-PRC004-EN 68 MechanicalSpecifications Capacities Based Finned Length at a Water Velocity of 3 feet per second or 0.9144 Meter per second or greater. Table MS-6 — Ratings, 5 5 / 16 ” (135 mm) Deep, Type DS Enclosure With Copper Aluminum Elements Tiers Steam Capacity Hot Water (Avg.) Tube. Encl. a...
Page 74 - holes on; Durable Construction; Security Wall Fin
FIN-PRC004-EN 74 Features andBenefits The Trane hydronic security wall finenclosures have been designed fornatural convection in slope top (Type S)and flat top (Type F) configurations in 12”(305 mm) and 18” (457 mm) heights witha depth of 5 5 / 16 ” (135 mm), primarily for use in maximum security ap...
Page 75 - ” Joiner Piece
75 FIN-PRC004-EN Accessories All 14-Gauge 2” Joiner Piece (Fastener Holes Pre-punched)For use with Fully Perforated 14-gaugeand 12-gauge enclosures only. End Trim (No Fastener Holes) End Cap Inside or Outside Corder
Page 85 - Partially Perforated
85 FIN-PRC004-EN DimensionalData Security Wall Fin Finned Tube Radiation Model S & F — Security Enclosures Partially Perforated 5 5 / 16 ” (135 mm) 3 / 4 ” (19 mm) 1 3 / 8 ” (35 mm) 18” (457 mm)12” (305 mm) 6” (152 mm) 2 TIER 18” (457 mm) ONLY PERFORATED AREA 6” (152 mm) 2 3 / 4 ” (70 mm) 3 / 4 ...
Page 86 - Fully Perforated
FIN-PRC004-EN 86 Finned Tube Radiation Model S & F — Security Enclosures Fully Perforated 5 5 / 16 ” (135 mm) 1 3 / 8 ” (35 mm) 18” (457 mm)12” (305 mm) 6” (152 mm) 2 TIER 18” (457 mm) ONLY FINISHED FLOOR 4” (MIN) (102 mm 2 21 / 32 ” (67 mm) 3 / 4 ” (19 mm) 3 / 4 ” (16 mm) 6” (152 mm) FINISHED W...
Page 91 - Models S and F
91 FIN-PRC004-EN MechanicalSpecifications SecurityEnclosures Models S and F Specifications Natural convection security wall fin shallbe furnished to meet the specifiedcapacity. Enclosure, heating elementsand accessories shall be installed inaccordance with the manufacturer’srecommendations. All encl...
Page 92 - Element Lengths
FIN-PRC004-EN 92 • 1” CA (25 mm) (Copper Tube-Aluminum Fin)The heating elements shall beconstructed of seamless coppertubing mechanically expanded intoaluminum fins. One tube end swagedfor end-to- end joining. 4 1 / 4 ” x 4 1 / 4 ” (108 mm x 108 mm) size fins x .020”(.51 mm) fin thickness for maximu...
Page 94 - Inside Corner
FIN-PRC004-EN 94 Features andBenefits Model 11S 6” (152 mm) End Cap 6” (152 mm) End Cap With Access Door 6” (152 mm) Wall Trim 8” (203 mm) Valve Compartment Inside Corner
Page 95 - Outside Corner
95 FIN-PRC004-EN 14” (356 mm) Fill-In Section Outside Corner 2” (51 mm) Splice Plate Features andBenefits Model 11S
Page 97 - Table PD-6— Copper/Aluminum Elements — Watts/Meter — Two Tiers
97 FIN-PRC004-EN PerformanceandGeneral Data Model 11SSI Units Table PD-4 — Copper/Aluminum Elements — Watts/Meter Steam 11S Rating Hot Water (Ave.) Copper/Aluminum Elements Encl. 102°C 104°C 99°C 93°C 88°C 82°C 77°C 71°C 66°C 60°C 54°C Tube Fin Size Fins/ Fin Mtg.(2) Factor Factor Size Millimeters M...
Page 98 - Elements listed in Item 1 element; One Tier
FIN-PRC004-EN 98 DimensionalData Model 11S Item Description Dwg. No. Material 1 Element — See Below See Tab Box As Specified 2 Enclosure SRP-47072C 18 (1.2) Ga. CRS 3 Bracket SRP-47073C 14 (1,9) Ga. CRS 4 Mounting Channel SRP-12930B 16 (1.5) Ga. .058 Galvaneeled 5 Rod Hanger .09 6A Volt Basic Wire 6...
