Page 2 - COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form ...
Page 4 - This product can be used in the following countries:; AT BG BY CA CZ DE DK EE
III This product can be used in the following countries: AT BG BY CA CZ DE DK EE ES FI FR GB GR HU IE IT LT LV MT NL NO PL PT RO RU SE SK TR UA
Page 5 - DECLARATION OF CONFORMITY; For the following equipment:; AV200 Nano Powerline Adapter; applicable to the product within the scope of Council Directives:; Yang Hongliang
TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: AV200 Nano Powerline Adapter Model No.: TL-PA2010 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the produ...
Page 6 - CONTENTS; Physical Interface
V CONTENTS Package Contents ........................................................................................................................................... 1 Chapter 1 Introduction ............................................................................................................
Page 7 - Package Contents; One Resource CD
TL-PA2010 AV200 Nano Powerline Adapter 1 Package Contents The AV200 Nano Powerline Adapter package contains the following items: ¾ One AV200 Nano Powerline Adapter (There are two AV200 Nano Powerline Adapters in Starter Kit) ¾ One RJ-45 Ethernet Cable (There are two RJ-45 Ethernet Cables in Starter ...
Page 8 - Chapter 1 Introduction; Pair; System Requirement
TL-PA2010 AV200 Nano Powerline Adapter 2 Chapter 1 Introduction Congratulations on your purchase of this outstanding Powerline Adapter. This device is an AV200 Nano Powerline Adapter which transforms your house’s existing electrical wiring into a ubiquitous networking infrastructure. Simply plug thi...
Page 10 - Chapter 2 Connecting Mechanism; Item
TL-PA2010 AV200 Nano Powerline Adapter 4 Chapter 2 Connecting Mechanism 2.1 Introduction The Powerline Adapter supports up to 200Mbps data rate. With this high speed connection rate, this Powerline Adapter allows you to setup a high speed home network by using your home existing electrical wiring. S...
Page 11 - Interface
TL-PA2010 AV200 Nano Powerline Adapter 5 On The Ethernet port is connected, but there is no data being transferred. Blinking The Ethernet port is transferring data. Ethernet LED Off The Ethernet port isn’t connected. ) Note: 5 minutes after the device connected to the adapter is turned off, and the ...
Page 12 - For detailed information about the Pair button, please refer to; Connection Instruction; ON
TL-PA2010 AV200 Nano Powerline Adapter 6 ) Note: 1. If you press the Pair button for more than 10 seconds, the Powerline Adapter will leave the network which it is associated with and its network name assumes a random value. The Power LED turns off when it disconnects from the Powerline network. 2. ...
Page 13 - Hardware Connection – Internet
TL-PA2010 AV200 Nano Powerline Adapter 7 2.6 Hardware Connection – Internet This section describes how to connect the Powerline Adapter into your existing ADSL broadband connection via ADSL Ethernet port. Follow the procedures described below to connect the Powerline Adapter to your ADSL broadband c...
Page 15 - Chapter 3 Installing Management Utility; Note; automatically pop up on your computer’s screen.; Management Utility; , and then the program installation
TL-PA2010 AV200 Nano Powerline Adapter 9 Chapter 3 Installing Management Utility Please verify that no other Powerline Adapter or any Encryption Management Utilities are installed before installing the provided software. If other Powerline Utilities are installed, uninstall them and restart your per...
Page 18 - Step 3: After the installation, a shortcut to the; “Powerline Utility”; application icon is provided on the
TL-PA2010 AV200 Nano Powerline Adapter 12 Step 3: After the installation, a shortcut to the “Powerline Utility” application icon is provided on the windows desktop.
Page 19 - Chapter 4 Using the Management Utility; Double click on the icon; “Status”; The; Status
TL-PA2010 AV200 Nano Powerline Adapter 13 Chapter 4 Using the Management Utility After you’d successfully installed the Powerline Adapter hardware and Management Utility software, you can set up or configure the devices according to your need. This Powerline Utility enables the users to identify pow...
Page 22 - Password is unnecessary to enter for renaming.
TL-PA2010 AV200 Nano Powerline Adapter 16 network name of this device on System configuration homepage. To change the name of the remote adapter or enter its password, please follow the steps below: (1) Select the desired device and click the Modify button to display the following dialog. (2) Enter ...
Page 23 - System; Click the; Upgrade Firmware; following dialog will pop up.
TL-PA2010 AV200 Nano Powerline Adapter 17 4.3 System The System tab window is for some basic settings of the adapter. On this tab window, you can upgrade the firmware to the latest version, reset the adapter’s settings to the factory defaults and configure all adapters’ network names. 4.3.1 Upgrade ...
Page 25 - appear on the; Network; to; MUST; have the same; Network Password; for
TL-PA2010 AV200 Nano Powerline Adapter 19 appear on the Network configuration homepage whose Device’s Password had been entered for the same logical network. A dialog window will appear to report the success of this operation. All Powerline devices are shipped using a default logical network (networ...
Page 26 - Chapter 5 Advanced Feature: How to Use the Pair Buttons; powerline devices which also support the; Set Up a Powerline AV Network with the Pair Button; button on only; Create a Powerline network using the Pair button
TL-PA2010 AV200 Nano Powerline Adapter 20 Chapter 5 Advanced Feature: How to Use the Pair Buttons 5.1 Pair ( Secure with 128 bits-AES) The Homeplug AV standard uses 128-bit AES (Advanced Encryption Standard) to safely transmit data between powerline adapters. For the powerline adapters to communicat...
Page 27 - . Press and hold the Pair button on Powerline adapter C for 1 second.; The sequence of Step 1 and Step 2 can be exchanged.; Leave
TL-PA2010 AV200 Nano Powerline Adapter 21 Join an existing Powerline AV Network: Powerline adapter A and Powerline adapter B form a HomeplugAV Network, Powerline adapter C wants to join this network. Step 1 . Press and hold the Pair button on Powerline adapter C for 1 second. Step 2 . Press and hold...
Page 28 - Appendix A: Troubleshooting; Power LED does not light up.
TL-PA2010 AV200 Nano Powerline Adapter 22 Appendix A: Troubleshooting The Troubleshooting provides answers to common problems regarding the Powerline Adapter. 1. The Power LED does not light up. Ans. Check the following: a) Make sure that the Powerline Adapter is properly plugged into a power outlet...