Page 2 - COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form ...
Page 4 - Package contents; purchased the product for assistance.
Package contents The following contents should be found in your box: ¾ One TD-8817 ADSL2/2+ Ethernet/USB Router ¾ One AC power Adapter for TD-8817 ADSL2/2+ Ethernet/USB Router ¾ Quick Installation Guide ¾ One RJ45 cable ¾ One USB cable ¾ Two RJ11 cables ¾ One ADSL splitter (only for Annex A) ¾ One R...
Page 5 - CONTENT
CONTENT Chapter 1. Introduction ........................................................................................ 1 1.1 Product Overview ...................................................................................................... 1 1.2 Main Features ....................................
Page 7 - Chapter 1. Introduction; Overview; IP; ADSL; Features; and CWMP
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 1 Chapter 1. Introduction 1.1 Product Overview Thank you for choosing the TD-8817 ADSL2/2+ Ethernet/USB Router . The device is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet network. TD-8817 connects to ...
Page 9 - Chapter 2. Hardware Installation; The Front Panel; Indicator
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 3 Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs are located on the front panel, they indicate the device’s working status. For details, please refer to LED Explanation. LED Explanation: Indicator Description Status Function D...
Page 10 - Method two; USB: Connect with your computer’s USB interface; Environment; The Router can be placed on a shelf or desktop.; Hardware installation procedures; First Step; the Router and the other end to a standard electrical outlet( 220V; Last Step
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 4 Method two ： Restore the default setting from “Maintenance-SysRestart” of the Router's Web-based Utility. ¾ LAN: Through the port, you can connect the Router to your PC or the other Ethernet network devices. ¾ USB: Connect with your computer’s USB in...
Page 12 - Chapter 3. Quick Installation Guide; PC; Click the; Start; menu on your desktop, right click; My Network Places; Right click; Local Area Connection
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 6 Chapter 3. Quick Installation Guide 3.1 Configure PC After you directly connect your PC to the TD-8817 or connect your adapter to a Hub/Switch which has connected to the Router, you need to configure your PC’s IP address. Follow the steps below to co...
Page 13 - Select; General
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 7 Figure 3-2 Step 3: Select General tab, highlight Internet Protocol (TCP/IP), and then click the Properties button. Figure 3-3
Page 14 - You can c
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 8 Step 4: Configure the IP address as Figure 3-4 shows. After that, click OK . Figure 3-4 ) Note: You can c onfigure the PC to get an IP address automatically, select “Obtain an IP address automatically” and “Obtain DNS server address automatically” in...
Page 15 - ) Is the connection between your PC and the Router correct?; Configuration; USB Drive installation procedures; relative operating system folder in the CD, and double click; Next
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 9 If the result displayed is similar to the screen shown below, it means that your PC has not connected to the Router. Figure 3-6 You can check it follow the steps below: 1) Is the connection between your PC and the Router correct? The LEDs of LAN port...
Page 17 - ) All of the above settings are under windows XP.; admin
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 11 Figure 3-9 ) Note: 1) All of the above settings are under windows XP. 2) If you want to pull out the USB device you must disconnect the network of USB first. 3) In the Vista operating system, maybe the “Unknown Device” screen will pop up when you in...
Page 18 - Select the; Quick Start; the; Change the login password in Figure 3-12, and then click the; NEXT; Configure the time for the Router, and then click the; NEXT
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 12 Figure 3-10 Step 1: Select the Quick Start tab, then click RUN WIZARD , and you will see Figure 3-11. Click the NEXT button. Figure 3-11 Step 2: Change the login password in Figure 3-12, and then click the NEXT button. Figure 3-12 Step 3: Configure ...
Page 20 - to finish the Quick Start.
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 14 ) Note: In Quick Start, you shouldn’t configure the PVC which uses the same VPI/VCI as the seven default PVCs in factory configuration does. Step 6: Click NEXT to finish the Quick Start. Figure 3-16
Page 21 - Chapter 4. Software Configuration
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 15 Chapter 4. Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequately, maybe you will ge...
Page 22 - Click the other submenus; System Log; or; Statistics; in Figure 4-2, you will be able to view the; Please refer to; Setup; Choose “; Interface Setup; and; LAN
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 16 Figure 4-2 ) Note: Click the other submenus System Log or Statistics in Figure 4-2, you will be able to view the system log and traffic statistics about the Router. 4.2 Quick Start Please refer to " 3.3: Login" . 4.3 Interface Setup Choose “...
Page 23 - ” menu, you can configure the parameters for WAN ports in
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 17 4.3.1 Internet Choose “ Interface Setup → Internet ” menu, you can configure the parameters for WAN ports in the next screen (shown in Figure 4-4). Figure 4-4 ¾ ATM VC: ATM settings are used to connect to your ISP. Your ISP provides VPI (Virtual Pat...
Page 25 - is not in this format.
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 19 RIP-2 format, the difference is that RIP2-M using Multicast, while RIP2-B using Broadcast format. • Direction: Select this option to specify the RIP direction. None is for disabling the RIP function. Both means the ADSL Router will periodically send...
Page 27 - These are the IP settings of the LAN interface for the device. These
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 21 If you select this type of connection, the modem can be configured to act as a bridging device between your LAN and your ISP. Bridges are devices that enable two or more networks to communicate as if they are two segments of the same physical LAN. F...
Page 30 - Advanced Setup; ” menu, and you will see the next screen (shown in Figure; Advanced Setup; ” menu, and you will see the routing information in the next
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 24 4.4 Advanced Setup Choose “ Advanced Setup ”, you can see the next submenus: Figure 4-12 Click any of them, and you will be able to configure the corresponding function. 4.4.1 Firewall Choose “ Advanced Setup → Firewall ” menu, and you will see the ...
Page 32 - to individually define the Address Mapping rule.
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 26 Figure 4-16 ¾ Virtual Circuit: Enter Virtual Circuit Index that you plan to setup for the NAT function. ¾ NAT Status: This field shows the current status of the NAT function for the current VC. You can go to the previous screen (shown in Figure 4-4)...
Page 33 - For VCs with single IP, select; Single
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 27 The Virtual Server is the server or server(s) behind NAT (on the LAN), for example, Web server or FTP server, that you can make visible to the outside world even though NAT makes your whole inside network appear as a single machine to the outside wo...
Page 35 - IP Address Mapping; is only available for VCs with Multiple IPs.
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 29 To add a mapping rule: Step 1: Select the “Virtual Circuit” and Multiple for the “Number of IPs”. Then select the tab IP Address Mapping (shown in Figure 4-19). ) Note: IP Address Mapping is only available for VCs with Multiple IPs. Step 2: Select t...
Page 38 - Click; in Figure 4-22, you can assign the PVID for each; Define VLAN Group; Click; in Figure 4-22, you can define VLAN groups in the next screen (shown
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 32 Figure 4-22 1. Assign VLAN PVID for each Interface Click Assign VLAN PVID for each Interface in Figure 4-22, you can assign the PVID for each interface in the next screen (shown in Figure 4-23). Figure 4-23 ¾ PVID: Each physical port has a default V...
Page 40 - Management; Access Management; through selected applications.
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 34 Figure 4-25 ¾ ADSL Mode: Select the ADSL operation mode which your ADSL connection uses. ¾ ADSL Type: Select the ADSL operation type which your ADSL connection uses. 4.5 Access Management Choose “ Access Management ”, you can see the next submenus: ...
Page 42 - Filter Type Selection:; Select the filter type for the configuration below.
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 36 Figure 4-28 ¾ Filter Type Selection: Select the filter type for the configuration below. ¾ IP/MAC Filter Set Index: Select the Set index for the IP Filter entry. This index can match with six IP / MAC Filter Rule Indexes. ¾ Interface: Select the int...
Page 43 - IP/MAC Filter Set Index; IP/MAC Filter Rule Index; together to appoint
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 37 Incoming means that IP traffic which is coming into the router, and the Outgoing means that IP traffic which is going out the router. ¾ IP/MAC Filter Rule Index: Select the Rule index for the IP Filter entry. ) Note: You should set the IP/MAC Filter...
Page 44 - If you want to make the rule take effect, please select; Yes; to active the rule.; IP / MAC Filter Set Index; to view the information about the rule.
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 38 ) Note: If you want to make the rule take effect, please select Yes to active the rule. Step 3: Enter the “Source IP Address”, “Destination IP Address”, “Subnet Mask” and “Port Number” in the corresponding field. Step 4: Select the Protocol as “TCP”...
Page 52 - SAVE; to make the new password take effect.; Maintenance; ”, you can configure the system time in the screen (shown in; NTP Server automatically; as the Synchronize time, you only need to set the time zone.
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 46 Figure 4-37 ) Note: 1) There is only one account that can access Web-Management interface. The default account is "admin", and the password is "admin". Admin has read/write access privilege. 2) When you change the password, you shoul...
Page 56 - ”, you can view the test results for the connectivity of the; Help
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 50 Figure 4-44 4.6.5 Diagnostic Choose “ Maintenance → Diagnostic ”, you can view the test results for the connectivity of the physical layer and protocol layer for both LAN and WAN sides in the screen (shown in Figure 4-45). Figure 4-45 4.7 Help Choos...
Page 58 - Appendix A: Specification
TD-8817 ADSL2/2+ Ethernet/USB Router User Guide 52 Appendix A: Specification General Standards and Protocols ANSI T1.413, ITU G.992.1, ITU G.992.2, ITU G.992.3, ITU G.992.5 IEEE 802.3, IEEE 802.3u, TCP/IP, PPPoA , PPPoE, SNTP, HTTP, DHCP, ICMP, NAT,CWMP Safety & Emission FCC 、 CE Ports 1 10/100M...
