Page 2 - COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form ...
Page 4 - CE Mark Warning; which case the user may be required to take adequate measures.; National Restrictions; Country Restriction Reason/remark; Canadian Compliance Statement; to the following two conditions:
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. National Restrictions This device is intended for home and office use in all EU countries (and other countries following ...
Page 5 - 당해; NCC Notice & BSMI Notice; 注意!
Cet appareil est conforme aux norms CNR exemptes de licence d’Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes: (1)cet appareil ne doit pas provoquer d’interférences et (2)cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer un fonctio...
Page 6 - 安全諮詢及注意事項; Safety Information
安全諮詢及注意事項 ●請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 ●清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 ●注意防潮,請勿將水或其他液體潑灑到本產品上。 ●插槽與開口供通風使用,以確保本產品的操作可靠並防止過熱,請勿堵塞或覆蓋開口。 ●請勿將本產品置放於靠近熱源的地方。除非有正常的通風,否則不可放在密閉位置中。 ●請不要私自打開機殼,不要嘗試自行維修本產品,請由授權的專業人士進行此項工作。 Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність...
Page 7 - DECLARATION OF CONFORMITY; For the following equipment:; AC750 Wireless Dual Band Gigabit Router; The product carries the CE Mark:; Person is responsible for making this declaration:
TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: AC750 Wireless Dual Band Gigabit Router Model No.: C2 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the p...
Page 8 - CONTENTS
CONTENTS Package Contents..................................................................................................... 1 Chapter 1. Introduction......................................................................................... 2 1.1 Overview of the Router.................................
Page 11 - Package Contents; The following items should be found in your package:
Archer C2 AC750 Wireless Dual Band Gigabit Router - 1 - Package Contents The following items should be found in your package: Archer C2 AC750 Wireless Dual Band Gigabit Router DC Power Adapter for Archer C2 AC750 Wireless Dual Band Gigabit Router Quick Installation Guide Resource CD for Arch...
Page 12 - Chapter 1. Introduction; Overview of the Router; Incredible Speed
Archer C2 AC750 Wireless Dual Band Gigabit Router - 2 - Chapter 1. Introduction 1.1 Overview of the Router The Archer C2 AC750 Wireless Dual Band Gigabit Router integrates 4-port Switch, Firewall, NAT-router and Wireless AP. The AC750 Wireless Dual Band Gigabit Router delivers exceptional range and ...
Page 13 - Gigabit Router without any explanation.
Archer C2 AC750 Wireless Dual Band Gigabit Router - 3 - 1.2 Conventions The router or Archer C2 mentioned in this guide stands for Archer C2 AC750 Wireless Dual Band Gigabit Router without any explanation. 1.3 Main Features Complies with IEEE 802.11ac. One 10/100/1000M Auto-Negotiation RJ45 Inte...
Page 14 - The Front Panel; Name; on for about 5 minutes and then turn off.
Archer C2 AC750 Wireless Dual Band Gigabit Router - 4 - 1.4 Panel Layout 1.4.1 The Front Panel Figure 1-1 LEDs on the front panel The router’s LEDs are located on the front panel (View from left to right). Name Status Indication Off Power is off. (Power) On Power is on. Off The wireless function is ...
Page 15 - The Rear Panel
Archer C2 AC750 Wireless Dual Band Gigabit Router - 5 - 1.4.2 The Rear Panel Figure 1-2 Rear Panel sketch The following parts are located on the rear panel (View from left to right). WPS/Reset: Pressing this button for less than 5 seconds enables the WPS function. If your client devices, such as w...
Page 16 - The USB port connects to a USB storage device or a USB printer.
Archer C2 AC750 Wireless Dual Band Gigabit Router - 6 - USB: The USB port connects to a USB storage device or a USB printer. Power On/Off: The switch for the power. Power: The Power socket is where you will connect the power adapter. Please use the power adapter provided with this Archer C2 AC...
Page 17 - Chapter 2. Connecting the router; System Requirements; Internet
Archer C2 AC750 Wireless Dual Band Gigabit Router - 7 - Chapter 2. Connecting the router 2.1 System Requirements Broadband Internet Access Service (DSL/Cable/Ethernet) One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the router is connected directly to the Ethernet) PC...
Page 18 - Figure 2-1 Hardware Installation
Archer C2 AC750 Wireless Dual Band Gigabit Router - 8 - power on the router, please make sure your computer is NOT connected to any other wireless network.) Figure 2-1 Hardware Installation Figure 2-2 USB Installation Note: If you want to use the router to share files or printer, plug the USB stor...
Page 19 - Chapter 3. Quick Installation Guide; Appendix B: Configuring the PC
Archer C2 AC750 Wireless Dual Band Gigabit Router - 9 - Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functions of your AC750 Wireless Dual Band Gigabit Router using Quick Setup Wizard within minutes. 3.1 TCP/IP Configuration The default IP address of the ...
Page 21 - Quick Installation Guide; admin; If the above; Quick Setup
Archer C2 AC750 Wireless Dual Band Gigabit Router - 11 - 3.2 Quick Installation Guide With a Web-based utility, it is easy to configure and manage the AC750 Wireless Dual Band Gigabit Router. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft...
Page 22 - Figure 3-5 Quick Setup; Figure 3-6 WAN Connection Type; The router provides; Dynamic IP; recommended that you make use of the; Next; to go on configuring.; successfully detected by the router.
Archer C2 AC750 Wireless Dual Band Gigabit Router - 12 - Figure 3-5 Quick Setup 3. Click Next , and then WAN Connection Type page will appear, shown in Figure 3-6. Figure 3-6 WAN Connection Type The router provides Auto-Detect function and supports five types of WAN connection: Dynamic IP , Static I...
Page 27 - TEST
Archer C2 AC750 Wireless Dual Band Gigabit Router - 17 - Figure 3-13 Quick Setup – Wireless 2.4GHz Wireless Network Name - Also called the SSID (Service Set Identification). Enter a value of up to 32 characters. The same name must be assigned to all wireless devices in your network. The default SS...
Page 28 - This field displayed the operating frequency being configured.; Figure 3-14 Quick Setup – Wireless 5GHz; Wireless Network Name -; Also called the
Archer C2 AC750 Wireless Dual Band Gigabit Router - 18 - Band - This field displayed the operating frequency being configured. Mode - This field determines the wireless mode which the router works on. 11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients. 11bgn mixed...
Page 29 - Region
Archer C2 AC750 Wireless Dual Band Gigabit Router - 19 - your network. The default SSID is set to be TP-LINK_5GHz_XXXXXX. This value is case-sensitive. For example, TEST is NOT the same as test . Region - Select your region from the drop-down list. This field specifies the region where the wireles...
Page 30 - the; Finish; button to complete the
Archer C2 AC750 Wireless Dual Band Gigabit Router - 20 - Figure 3-15 Quick Setup - Comfirm 9. Click the Finish button to complete the Quick Setup . Figure 3-16 Quick Setup - Finish
Page 31 - Chapter 4. Configuring the router
Archer C2 AC750 Wireless Dual Band Gigabit Router - 21 - Chapter 4. Configuring the router This chapter will show each key function of the Web page and its configuration method. 4.1 Login After your successful login, you will see the main menus on the left of the Web-based utility. On the right, the...
Page 32 - Please refer to
Archer C2 AC750 Wireless Dual Band Gigabit Router - 22 - Figure 4-1 Status 4.3 Quick Setup Please refer to 3.2 Quick Installation Guide .
Page 33 - WAN
Archer C2 AC750 Wireless Dual Band Gigabit Router - 23 - 4.4 Network Figure 4-2 the Network menu There are three submenus under the Network menu (shown in Figure 4-2): WAN , LAN and MAC Clone . Click any of them, and you will be able to configure the corresponding function. 4.4.1 WAN Choose menu “ N...
Page 43 - button to allow; PPPoE; Connections which use dynamic IP address assignment.; Static IP; Connections which use static IP address assignment.; LAN; Choose menu “; Network; ”, you can configure the IP parameters of the LAN on the screen; MAC Address
Archer C2 AC750 Wireless Dual Band Gigabit Router - 33 - Note: If you don't know how to choose the appropriate connection type, click the Detect button to allow the router to automatically search your Internet connection for servers and protocols. The connection type will be reported when an activ...
Page 44 - server will change accordingly at the same time; MAC Clone; Only the PC on your LAN can use the; MAC Address Clone; Dual Band Selection
Archer C2 AC750 Wireless Dual Band Gigabit Router - 34 - 2) If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP server will change accordingly at the same time , while the Virtual Server and DMZ Host will not take effect until they are re-configured. 4.4.3 MA...
Page 45 - Basic Settings
Archer C2 AC750 Wireless Dual Band Gigabit Router - 35 - Figure 4-12 Dual Band Selection 2.4GHz (802.11b/g/n) - Click the box, and then the router will only work in 2.4GHz frequency. You can use the 2.4GHz band to connect to many classic wireless devices like gaming consoles, laptops, DVRs, ect. ...
Page 47 - If; Mode; selecting field will turn grey
Archer C2 AC750 Wireless Dual Band Gigabit Router - 37 - 11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. It is strongly recommended that you set the Mode to 802.11bgn mixed , and all of 802.11b, 802.11g, and 802.11n wireless stations can connect to the router...
Page 48 - WPS
Archer C2 AC750 Wireless Dual Band Gigabit Router - 38 - Key type - This option should be chosen according to the AP's security configuration. It is recommended that the security type is the same as your AP's security type WEP Index - This option should be chosen if the key type is WEP(ASCII) or...
Page 50 - Wireless Security
Archer C2 AC750 Wireless Dual Band Gigabit Router - 40 - Step 1: Keep the default WPS status as Enabled and click the Add device button in Figure 4-16, then Figure 4-19 will appear. Figure 4-19 Add A New Device Step 2: Enter the PIN number from the client device in the field on the WPS screen above....
Page 54 - Wireless MAC Filtering
Archer C2 AC750 Wireless Dual Band Gigabit Router - 44 - 4.6.4 Wireless MAC Filtering Choose menu “ Wireless 2.4GHz → Wireless MAC Filtering ”, you can control the wireless access by configuring the Wireless MAC Filtering function, shown in Figure 4-24. Figure 4-24 Wireless MAC Filtering To filter w...
Page 56 - Wireless Advanced; ”, you can configure the advanced; Fragmentation Threshold -; This value is the maximum size determining whether packets
Archer C2 AC750 Wireless Dual Band Gigabit Router - 46 - 4.6.5 Wireless Advanced Choose menu “ Wireless 2.4GHz → Wireless Advanced ”, you can configure the advanced settings of your wireless network. Figure 4-26 Wireless Advanced Transmit Power - Here you can specify the transmit power of router. ...
Page 57 - Wireless Statistics
Archer C2 AC750 Wireless Dual Band Gigabit Router - 47 - DTIM Interval - This value determines the interval of the Delivery Traffic Indication Message (DTIM). A DTIM field is a countdown field informing clients of the next window for listening to broadcast and multicast messages. When the router h...
Page 58 - This page will be refreshed automatically every 5 seconds.
Archer C2 AC750 Wireless Dual Band Gigabit Router - 48 - If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page. Note: This page will be refreshed automatically every 5 seconds. 4.7 Wi...
Page 62 - Figure 4-33 Add A New Device; Press and hold the WPS button of the client device directly.; II. Enter the client device’s PIN on the router; Keep the default WPS status as; Enabled; and click the; Add device; Figure 4-34 Add A New Device
Archer C2 AC750 Wireless Dual Band Gigabit Router - 52 - Figure 4-32 Figure 4-33 Add A New Device Step 2: Press and hold the WPS button of the client device directly. Step 3: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup process. Step 4: When the WPS LED is o...
Page 63 - successfully added to the network.
Archer C2 AC750 Wireless Dual Band Gigabit Router - 53 - Step 2: Enter the PIN number from the client device in the field on the above WPS screen. Then click Connect button. Step 3: “ Connect successfully ” will appear on the screen of Figure 4-34, which means the client device has successfully conn...
Page 65 - If you check the; encryption, you will; encryption, you will
Archer C2 AC750 Wireless Dual Band Gigabit Router - 55 - Note: If you check the WPA/WPA2-Personal radio button and choose TKIP encryption, you will find a notice in red as shown in Figure 4-36 . Figure 4-36 WPA/WPA2 – Personal Wireless Password - You can enter ASCII characters between 8 and 63 c...
Page 66 - selected Shared Key as Authentication Type.
Archer C2 AC750 Wireless Dual Band Gigabit Router - 56 - Radius Server Password - Enter the password for the Radius server. Group Key Update Period - Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update. WEP - It is based on the IEEE ...
Page 69 - Wireless; ”, you can configure the advanced settings of
Archer C2 AC750 Wireless Dual Band Gigabit Router - 59 - 4.7.5 Wireless Advanced Choose menu “ Wireless → Wireless Advanced ”, you can configure the advanced settings of your wireless network. Figure 4-41 Wireless Advanced Transmit Power - Here you can specify the transmit power of router. You can...
Page 71 - Guest Network; ”, and you can configure the Guest Network Wireless Settings on the
Archer C2 AC750 Wireless Dual Band Gigabit Router - 61 - Note: This page will be refreshed automatically every 5 seconds. 4.8 Guest Network Choose “ Guest Network ”, and you can configure the Guest Network Wireless Settings on the page as shown in Figure 4-43. Figure 4-43 Guest Network Wireless Se...
Page 72 - DHCP Settings
Archer C2 AC750 Wireless Dual Band Gigabit Router - 62 - Allow Guest To Access My Local Network - If enabled, guests can communicate with hosts. Allow Guest To Access My USB Storage Sharing - If enabled, guests can access to USB storage sharing servers. Guest Network Isolation -. If enabled, g...
Page 74 - DHCP Clients List
Archer C2 AC750 Wireless Dual Band Gigabit Router - 64 - 4.9.2 DHCP Clients List Choose menu “ DHCP → DHCP Clients List ”, you can view the information about the clients attached to the router in the screen as shown in Figure 4-46. Figure 4-46 DHCP Clients List Client Name - The name of the DHCP c...
Page 76 - USB Mass Storagre; Figure 4-50 User Account Management; User Accounts
Archer C2 AC750 Wireless Dual Band Gigabit Router - 66 - 4.10 USB Settings Figure 4-49 The USB Settings menu There are six submenus under the USB Settings menu (shown in Figure 4-49): USB Mass Storage , User Accounts , Storage Sharing , FTP Server , Media Server and Print Server and. Click any of th...
Page 78 - Please restart the service for the new settings to take effect.; Windows; to open the Run dialog box and type; and press; net use; Storage Sharing
Archer C2 AC750 Wireless Dual Band Gigabit Router - 68 - 1. Please restart the service for the new settings to take effect. 2. If you cannot use the new user name and password to access the shares, press Windows logo + R to open the Run dialog box and type net use \\192.168.1.1 /delete /yes and pres...
Page 80 - FTP Server
Archer C2 AC750 Wireless Dual Band Gigabit Router - 70 - 4.10.4 FTP Server Choose menu “ USB Settings → FTP Server ”, you can create an FTP server that can be accessed from the Internet or your local network. Figure 4-54 FTP Server Configuration Server Status - Indicates the FTP Server's current s...
Page 81 - Media Server
Archer C2 AC750 Wireless Dual Band Gigabit Router - 71 - 6. Click the Apply button to start the ftp server. To add a new folder, follow the instructions below. 1. Click Add New Folder in Figure 4-54. Figure 4-55 Add or Modify Share Folder 2. Enter display name of the share folder in Shared Name file...
Page 83 - Print Server
Archer C2 AC750 Wireless Dual Band Gigabit Router - 73 - Figure 4-58 Add New Folder Share Name - You can enter a display name for the share folder. Directory - Displays the location of this folder. Browse – Click the button to select the folder to share. Apply - Click the button to save your...
Page 85 - Virtual Servers
Archer C2 AC750 Wireless Dual Band Gigabit Router - 75 - 4.12.1 Virtual Servers Choose menu “ Forwarding → Virtual Servers ”, and then you can view and add virtual servers on this page (shown in Figure 4-62). Virtual servers can be used for setting up public services on your LAN. A virtual server is...
Page 86 - page to be any other value except 80 such as 8080.; Port Triggering
Archer C2 AC750 Wireless Dual Band Gigabit Router - 76 - 4. Select the protocol used for this application in the Protocol drop-down list, either TCP , UDP , or All . 5. Select the Enabled option in the Status drop-down list. 6. Click the Save button. Figure 4-63 Add or Modify a Virtual Server Entry ...
Page 88 - hosts on the LAN will be refused.; Ports; ranges cannot overlap each other.; DMZ
Archer C2 AC750 Wireless Dual Band Gigabit Router - 78 - Figure 4-65 Add or Modify a Triggering Entry To modify or delete an existing entry: 1. Find the desired entry in the table. 2. Click Edit or Delete as desired on the Edit column. Click the Enable Selected button to make selected entries enable...
Page 89 - UPnP
Archer C2 AC750 Wireless Dual Band Gigabit Router - 79 - DHCP client function disabled and should have a new static IP Address assigned to it because its IP Address may be changed when using the DHCP function. Figure 4-66 DMZ To assign a computer or server to be a DMZ server: 1. Click the Enable but...
Page 90 - Basic Security
Archer C2 AC750 Wireless Dual Band Gigabit Router - 80 - External Port - The port which the router opened for the application. Protocol - The type of protocol which is opened. Internal Port - The port which the router opened for local host. IP Address - The IP address of the local host which...
Page 92 - Advanced Security
Archer C2 AC750 Wireless Dual Band Gigabit Router - 82 - the use of cryptographic security services. To allow IPSec tunnels to pass through the router, click Enable . ALG - It is recommended to enable Application Layer Gateway (ALG) because ALG allows customized Network Address Translation (NAT) t...
Page 93 - Dos Protection will take effect only when the; Traffic Statistics; in “; System Tool; Local Management
Archer C2 AC750 Wireless Dual Band Gigabit Router - 83 - Note: Dos Protection will take effect only when the Traffic Statistics in “ System Tool → Statistics ” is enabled. Enable ICMP-FLOOD Attack Filtering - Enable or Disable the ICMP-FLOOD Attack Filtering. ICMP-FLOOD Packets Threshold (5~36...
Page 94 - button; Remote Management
Archer C2 AC750 Wireless Dual Band Gigabit Router - 84 - Figure 4-71 Local Management By default, the radio button “ All the PCs on the LAN are allowed to access the Router's Web-Based Utility ” is checked. If you want to allow PCs with specific MAC Addresses to access the Setup page of the router's...
Page 95 - Parent Control
Archer C2 AC750 Wireless Dual Band Gigabit Router - 85 - Figure 4-72 Remote Management Web Management Port - Web browser access normally uses the standard HTTP service port 80. This router's default remote management web port number is 80. For greater security, you can change the remote management...
Page 96 - Figure 4-73 Parent Control Settings; Enable; if you want this function to take effect otherwise, check; Disable
Archer C2 AC750 Wireless Dual Band Gigabit Router - 86 - Figure 4-73 Parent Control Settings Parent Control - Check Enable if you want this function to take effect; otherwise, check Disable .
Page 98 - Figure 4-74 Parent Control Settings; Access Control; Figure 4-75 Access Control
Archer C2 AC750 Wireless Dual Band Gigabit Router - 88 - Figure 4-74 Parent Control Settings 4.15 Access Control Figure 4-75 Access Control
Page 99 - Rule
Archer C2 AC750 Wireless Dual Band Gigabit Router - 89 - There are four submenus under the Access Control menu: Rule , Host , Target and Schedule (as shown in Figure 4-75). Click any of them, and you will be able to configure the corresponding function. 4.15.1 Rule Choose menu “ Access Control → Rul...
Page 101 - Host
Archer C2 AC750 Wireless Dual Band Gigabit Router - 91 - 4. Click the submenu Target of Access Control in the left to enter the Target List page. Add a new entry with the Target Description is Target_1 and Domain Name is www.google.com. 5. Click the submenu Schedule of Access Control in the left to ...
Page 103 - Target
Archer C2 AC750 Wireless Dual Band Gigabit Router - 93 - 1. Click Add New button in Figure 4-78 to enter the Add or Modify a Host Entry page. 2. In Mode field, select MAC Address from the drop-down list. 3. In Description field, create a unique description for the host (e.g. Host_1). 4. In MAC Addre...
Page 106 - Schedule
Archer C2 AC750 Wireless Dual Band Gigabit Router - 96 - 4.15.4 Schedule Choose menu “ Access Control → Schedule ”, and then you can view and set a Schedule list in the next screen as shown in Figure 4-85. The Schedule list is necessary for the Access Control Rule. Figure 4-85 Schedule Settings De...
Page 107 - Advanced Routing
Archer C2 AC750 Wireless Dual Band Gigabit Router - 97 - Figure 4-86 Advanced Schedule Settings For example : If you desire to restrict the internet activities of host with MAC address 00:11:22:33:44:AA to access www.google.com only from 18:00 to 20:00 on Saturday and Sunday , you should first follo...
Page 108 - Static Route List
Archer C2 AC750 Wireless Dual Band Gigabit Router - 98 - There are two submenus under the Advanced Routing menu as shown in Figure 4-87: Static Route List and System Routing Table . Click any of them, and you will be able to configure the corresponding function. 4.16.1 Static Route List Choose menu ...
Page 109 - System Routing Table
Archer C2 AC750 Wireless Dual Band Gigabit Router - 99 - 3. Select Enabled or Disabled for this entry on the Status drop-down list. 4. Click the Save button to make the entry take effect. Other configurations for the entries: Click the Delete button to delete the entry. Click the Enable Selected but...
Page 110 - Bandwidth Control
Archer C2 AC750 Wireless Dual Band Gigabit Router - 100 - 4.17 Bandwidth Control Figure 4-91 Bandwidth Control Choose menu “ Bandwidth Control ”, and then you can configure the bandwidth control in the screen as shown in Figure 4-91 . You can configure the Egress Bandwidth and Ingress Bandwidth in t...
Page 111 - Binding Settings
Archer C2 AC750 Wireless Dual Band Gigabit Router - 101 - 1. Click Add New shown in Figure 4-91, you will see a new screen shown in Figure 4-92. 2. Enter the information like the screen shown below. Figure 4-92 Bandwidth Control Rule Settings 3. Click the Save button. 4.18 IP & MAC Binding Figur...
Page 112 - ARP List
Archer C2 AC750 Wireless Dual Band Gigabit Router - 102 - MAC Address - The MAC address of the controlled computer in the LAN. IP Address - The assigned IP address of the controlled computer in the LAN. Bind - Check this option to enable ARP binding for a specific device. Edit - To edit or d...
Page 113 - interference to the IP & MAC Binding list.
Archer C2 AC750 Wireless Dual Band Gigabit Router - 103 - Figure 4-96 ARP List 1. MAC Address - The MAC address of the controlled computer in the LAN. 2. IP Address - The assigned IP address of the controlled computer in the LAN. 3. Status - Indicates whether or not the MAC and IP addresses are boun...
Page 114 - button, then input your new username and password and click the; Login
Archer C2 AC750 Wireless Dual Band Gigabit Router - 104 - Figure 4-97 No-ip.com DDNS Settings To set up for DDNS, follow these instructions: 1. Enter the Domain Name you received from dynamic DNS service provider. 2. Enter the UserName for your DDNS account. 3. Enter the Password for your DDNS accou...
Page 118 - - Choose the correct WAN connection type based on your ISP network; Dynamic IPv6; - Connections which use dynamic IPv6 address assignment.; Static IPv6; - Connections which use static IPv6 address assignment.; PPPoEv6; - Connections which use 6to4 address assignment.
Archer C2 AC750 Wireless Dual Band Gigabit Router - 108 - 4.20.2 IPv6 WAN Figure 4-102 Enable/Disable IPv6 Connection Type - Choose the correct WAN connection type based on your ISP network topology. Dynamic IPv6 - Connections which use dynamic IPv6 address assignment. Static IPv6 - Connection...
Page 123 - Time Settings
Archer C2 AC750 Wireless Dual Band Gigabit Router - 113 - 4.21 System Tools Figure 4-108 The System Tools menu Choose menu “ System Tools ”, and you can see the submenus under the main menu: Time Settings , Diagnostic , Firmware Upgrade , Factory Defaults , Backup & Restore , Reboot , Password ,...
Page 125 - Figure 4-110 Time settings; Diagnostic; System Tools; ”, and then you can transact; Ping; or; Traceroute; Figure 4-111 Diagnostic Tools
Archer C2 AC750 Wireless Dual Band Gigabit Router - 115 - Figure 4-110 Time settings Note: 1. This setting will be used for some time-based functions such as firewall. You must specify your time zone once you login to the router successfully, otherwise, these functions will not take effect. 2. The...
Page 126 - Only one user can use the diagnostic tools at one time.
Archer C2 AC750 Wireless Dual Band Gigabit Router - 116 - Diagnostic Tool - Check the radio button to select one diagnostic too. Ping - This diagnostic tool troubleshoots connectivity, reachability, and name resolution to a given host or gateway. Traceroute - This diagnostic tool tests the per...
Page 127 - Firmware Upgrade
Archer C2 AC750 Wireless Dual Band Gigabit Router - 117 - 4.21.3 Firmware Upgrade Choose menu “ System Tools → Firmware Upgrade ”, and then you can update the latest version of firmware for the router on the following screen. Figure 4-113 Firmware Upgrade Firmware Version - Displays the current fi...
Page 128 - Factory Defaults; All changed settings will be lost when defaults are restored.
Archer C2 AC750 Wireless Dual Band Gigabit Router - 118 - 4.21.4 Factory Defaults Choose menu “ System Tools → Factory Defaults ”, and then and you can restore the configurations of the router to factory defaults on the following screen Figure 4-114 Restore Factory Default Click the Restore button t...
Page 129 - Reboot
Archer C2 AC750 Wireless Dual Band Gigabit Router - 119 - Click the Restore button to update the configuration with the file whose path is the one you have input or selected in the blank. Note: The current configuration will be covered with the uploading configuration file. Wrong process will le...
Page 130 - spaces. Enter the new Password twice to confirm it.; Save; System Log
Archer C2 AC750 Wireless Dual Band Gigabit Router - 120 - Figure 4-117 Password It is strongly recommended that you should change the factory default user name and password of the router, because all users who try to access the router's Web-based utility or Quick Setup will be prompted for the route...
Page 131 - Statistics
Archer C2 AC750 Wireless Dual Band Gigabit Router - 121 - Log Settings - Click to change the log settings . 4.21.9 Statistics Choose menu “ System Tools → Statistics ”, and then you can view the statistics of the router, including total traffic and current traffic of the last Packets Statistic Int...
Page 133 - Choose ”; Logout; ”, and you will be back to the login screen as shown in Figure 4-119.
Archer C2 AC750 Wireless Dual Band Gigabit Router - 123 - 4.22 Logout Choose ” Logout ”, and you will be back to the login screen as shown in Figure 4-119. Figure 4-119 Logout
Page 134 - The telephone cord plugs into the Line port of the ADSL Modem.
Archer C2 AC750 Wireless Dual Band Gigabit Router - 124 - Appendix A: FAQ 1. How do I configure the router to access Internet by ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Connect the Ethernet cable from your ADSL Modem to the Internet port on the router. T...
Page 137 - Figure A-7 Basic Security
Archer C2 AC750 Wireless Dual Band Gigabit Router - 127 - Figure A-7 Basic Security 4. I want to build a WEB Server on the LAN, what should I do? 1) Because the WEB Server port 80 will interfere with the WEB management port 80 on the router, you must change the WEB management port number to avoid in...
Page 141 - Appendix C: Specifications; General
Archer C2 AC750 Wireless Dual Band Gigabit Router - 131 - Appendix C: Specifications General Standards IEEE 802.11ac, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.11a, IEEE 802.11e, IEEE 802.11i, IEEE 802.1X, IEEE 802.3X, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab Protocols TCP/IP, PPPoE, DHCP, ICM...