Toshiba RKP002Z - Manual

E6581277 c - 4 - Preface Thank you for purchasing Remote Keypad (RKP002Z ) for TOSVERT series inverters. Using this product, panel operation, display and adjustment of the inverter can be remotely controlled from up to 5 meters away. You can copy data from one place to another and then execute data ...

E6581277 c - 5 - Table of contents 1. Overview ････････････････････････････････････････････････････････････････････････････････ 6 2. Names and functions of main parts ･････････････････････････････････････････････････････････ 7 3. Connection and start-up ･･････････････････････････････････････････････...

E6581277 c - 7 - 2. Names and functions of main parts The drawings below show names and functions of main parts. „ Front view 8 ( ( 8 COPY MODE RUN PRG MON EASY Hz % RUN A STOP B MODE ESC ENT EASY Hz lamp *1 Lights when displayed values are Hz. % lamp *1 Lights when displayed values are %. Operation...

E6581277 c - 8 - „ Operation keys and their functions in “COPY MODE” The operation key’s functions in “COPY MODE” are explained in the following table. Operation key Function Operation key Function RUN A Memory A key(Exclusive key for simple copying) In the simple copying function, this keyis used t...

E6581277 c - 9 - 4. Functions in detail Remote Keypad can be used as remote operation panel (“REMOTE KEYPAD MODE”) or parameter back-up device (“COPY MODE”). W hen the “COPY MODE” lamp is lit when turning power on, Remote Keypad operates in “COPY MODE”, otherwise in “REMOTE KEYPAD MODE”. 4.1. Proced...

E6581277 c - 10 - 4.3.1. Copying function “ copy ” The data stored in a memory can be copied to another memory selected from among four memories (the inverter's memory and Remote Keypad memories A, B, and C). Remote Keypad can not be used to copy parameters from one inverter to another inverter of a...

E6581277 c - 12 - 4.3.3. Comparing function “ comp ” This function enables the operator to compare data stored in two memories selected from among four memories (the inverter’s memory and Remote Keypad memories A, B, and C) as well as to search for parameters that differ from each other. The compari...

E6581277 c - 13 - 4.3.4. Memory protection function “ prot ” The memory protection function protects the selected memory from being overwritten. W hen this function is initiated copying data to the memory is prohibited. Reading the memory data is permitted. W hen all the memories are initialized by ...

E6581277 c - 14 - 4.3.5. Memory initializing function “ clr ” A selected one of the memories either memory A, B, C of Remote Keypad is enable to be initialized with this function. In addition, all memories including system memory of Remote Keypad is also enable to be initialized. Operating procedure...

E6581277 c - 15 - 4.3.6. Remote Keypad parameter editing function This function allows the user to edit the parameters of Remote Keypad. Remote Keypad parameter list Title Function Description f-01 Software version displaying Display shows the software version of Remote Keypad. f-02 Automatic compar...

E6581277 c - 18 - 6. Outline drawing „ Following is the outline drawing of Remote Keypad (Unit: mm)

E6581277 c - 19 - „ Mounting Mount Remote Keypad on the front of the panel board as illustrated below. On the front of the panel board, cut the area shown below for mounting Remote Keypad. Then, fix Remote Keypad on the panel board with the mounting screws (M3 x 12) supplied as accessories. (M3 scre...