Toshiba RBC-AMS41E- Manual

GRUPAd.o.o. 5 EN Setting the current day of the week and clock time • Set the current clock time and day of the week.• The day of the week and clock settings can be performed whether the air conditioner is running or shut down.* The air conditioner continues to operate (run) while the day of the wee...

GRUPAd.o.o. 6 Correct operating procedures The functions will differ depending on the model and system. • Follow the steps below before using the remote control system for the very first time or when changing any of the settings. • After the steps have been followed, operation will commence using th...

GRUPAd.o.o. Correct operating procedures 7 EN The functions will differ depending on the model and system. • To increase the cooling or heating effect, be sure to change the louver direction between cooling and heating operations. • The nature of air is to fall toward the floor where it collects whe...

GRUPAd.o.o. Correct operating procedures 8 Setting the frost protection operation 1 Push the TEMP button (49) during a heating operation. • Repeatedly push the button or hold it down until “ ” appears on the numeric display. 2 Now hold down the TEMP button (49) for at least 4 seconds. • When this bu...

GRUPAd.o.o. Correct operating procedures 9 EN The functions will differ depending on the model and system. * For further details, refer to the operating instructions of the air conditioner. Operation 1 Hold down the grille button (47) for at least 4 seconds. • The display transfers to the grille up/...

GRUPAd.o.o. 10 Scheduled operations • Scheduled operations for a 1-week period can be performed using this remote controller. • Eight (01 to 08) operations for each day of the week can be set in a scheduled operation program (item settings).– The following items can be set in a program: a. Operation...

GRUPAd.o.o. Scheduled operations 13 EN How to execute scheduled operations • On the screen of the remote controller whose power has been turned on, check that the current day of the week and clock time are set accurately. Scheduled operations cannot be executed while the days of the week display, th...

GRUPAd.o.o. 17 EN Timer operations • Before this remote controller is shipped from the factory, the schedule timer operation function is set as an initial setting (default), but the count-down timer operation function can be selected instead.* Users who want the timer operation function should refer...

GRUPAd.o.o. 18 Troubleshooting Before requesting repair work Check out the following points before requesting repair work. The scheduled operation is not performed even though the set time is reached. • The scheduled operation has not been set.• A special holiday has been set. The current clock time...

GRUPAd.o.o. 19 EN Selecting the remote controller functions • Change the settings of the remote controller functions as required by taking the steps below. How to change the remote controller functions 1 While operation is shut down, push the button (43) and button (48) together for at least 4 secon...