Toshiba IK-CU44A - Manual
Toshiba IK-CU44A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Indication definitions
- Page 3 – • Note the following instructions when installing.; Copyright and Right of Portrait
- Page 4 – TABLE OF CONTENTS; SAFETY PRECAUTIONS
- Page 6 – NAMES AND FUNCTIONS; Camera Control Unit
- Page 9 – IRIS
- Page 10 – EE lens; Current consumption must be 50 mA or less.; WHEN USING THE CAMERA WITH THE CAMERA UNIT FIXED; EE lens connector; GND
- Page 12 – (1) White balance adjustment in modes other than AUTO; Set the WB switch to “SET” position.
- Page 13 – MODE SETTING BY ON SCREEN DISPLAY; • When setting is changed in the menu screen,
- Page 15 – Return to “SS” of SHUTTER.
- Page 17 – • If the internal synchronization is set while; (1) Setting AREA the same for AGC, auto electronic shutter and
- Page 18 – Press the FUNC button to set the data.; (2) Setting AREA for white balance separately from the AREA; Press the FUNC button to display the submenu.
- Page 20 – The setting is common to scene files A and B.
- Page 21 – (1) External sync signal input conditions; SYNC section; (3) Using the camera with external sync signal
- Page 22 – CAUTIONS ON USE AND INSTALLATION; Carefully handle the units.
- Page 23 – BEFORE MAKING A SERVICE CALL; Symptom
- Page 24 – EXTERIOR DIMENSIONS
- Page 25 – Servicing Instructions for; Front Side
- Page 28 – LIMITED WARRANTY
1
INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
USER-INSTALLER CAUTION:
Your authority to operate this FCC verified equipment could be
voided if you make changes or modifications not expressly approved by the party responsible for
compliance to Part 15 of the FCC rules.
This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equip-
ment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
CAMERA CONTROL UNIT
IK-CU44A
INSTRUCTION MANUAL
For Customer Use
Enter below the Serial No.
w h i c h i s l o c a t e d o n t h e
bottom of the cabinet. Re-
tain this information for fu-
ture reference.
Model No.: IK-CU44A
Serial No.:
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SAFETY PRECAUTIONS *1: Catastrophic bodily injury means loss of eyesight, burns (high and low temperatured), shock, fracture, poisoning, etc. which leaves a sequela and require hospitalization or pro-longed treatment. *2: Bodily injury means injuries, burns and electric shock which does not requir...
3 • Do not put the product in an unstable, slanting and/or vibrated place. Drop and/or fail of the product may cause injury. • Do not touch the power cord or other connection cables during a thunderstorm. This might cause electric shock. Caution Disclaimer • Note the following instructions when inst...
4 TABLE OF CONTENTS SAFETY PRECAUTIONS ................................................................................. 2 1. COMPONENTS ............................................................................................... 52. SPECIFICATIONS ...................................................
