Page 2 - Remember...; Contents; do’s
? For television operation queries, please ring the helpline… Remember… 2 Contents SETTING UP Safety precautions – Some do’s and don’ts for you to be aware of 3 Installation and important information 4 The remote control – an at-a-glance guide 5 Connecting external equipment – a guide to connecting ...
Page 3 - Safety Precautions; ABOVE ALL; Air Circulation
3 Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like anyelectrical equipment, care must be taken to obtain the best results and for safety to be assured. Please readthe points below for your own safety. They are of a general nature, ...
Page 4 - Installation and important information; Where to install; EXCLUSION CLAUSE
4 Installation and important information Where to install Locate the television away from direct sunlight and stronglights, soft, indirect lighting is recommended for comfortableviewing. Use curtains or blinds to prevent direct sunlightfalling on the screen. Place on a sturdy platform, the mounting ...
Page 5 - The remote control; UP; Inserting batteries and effective range of the remote; OK
5 The remote control UP Remove the back cover to reveal the battery compartment and make sure the batteries are insertedthe right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V. Do not combine a used, old battery with a new one or mix battery types. Remove dead batteriesimme...
Page 6 - Connecting external equipment; media recorder
HDMI HDMI 6 Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switchremove the mains plug from the wall socket. HDMI™ (High-Definition Multimedia Interface) is for usewith a DVD, decoder or electrical equipment with digitalaudio ...
Page 7 - the back of your television
7 Connecting a computer or component video source the back of your television Computer Audio cable from PC or component video audio source to television (not supplied) Conversion adaptor if required (not supplied) RGB PC cable (not supplied) Mini D-sub 15p connector Mini D-sub 15p connector Componen...
Page 8 - Side connections and controls; MENU; Switching on
8 Side connections and controls If the red LED is unlit check that the mains plug isconnected to the power supply. If the picture does notappear press a number button on the remote control, itmay take a few moments. To put the television into Standby press i on the remote control. To view the televi...
Page 9 - if they are connected.
9 Tuning the television using Quick Setup, Programme sorting Before switching on the television put your decoder and media recorder to Standby if they are connected. To set up the television use the buttons on the remote control as detailed on page 5. 1 2 3 5 6 7 8 9 4 Connect the television to the ...
Page 10 - Manual tune; The television can be tuned-in manually using; . For example: if the television cannot be; System; see page 9
4 Press R to select System and use P or Q to change ( if required, see page 9 ). Then press R to select Search . Press P or Q to begin the search. The search symbol will flash. 10 Manual tune Press OK to select. If the programme is skipped, Programme skip must be removed before storing. The televisi...
Page 11 - continued; Programme skip; LEASE
Manual tuning Prog. Sys. Channel Station 0 I C60 VCR 1 I C22 BBC1 2 I C28 BBC2 3 I C25 ITV 4 I C32 CH4 5 I C69 OK Select MENU Back EXIT Watch TV 11 Manual tune continued Programme skip Press MENU and repeat from Step 2 or press EXIT . Each programme position has to be individually selected. To turn ...
Page 12 - stereo/bilingual transmissions; Using Auto tuning; Selecting programme positions
12 Auto tune, general controls, time display, stereo/bilingual transmissions Using Auto tuning 1 2 3 4 To set up the television using Auto tuning , press MENU and use S or R to select the SET UP menu. You must allow the television to complete the search. When the search is complete the television wi...
Page 14 - Widescreen viewing; SUPER LIVE; button repeatedly to select between; Super live; and; CINEMA
14 Widescreen viewing SUPER LIVE This setting will enlarge the image to fit the screen by stretching the image horizontally, holding the correct proportions at the centre of the image. Some distortion may occur. SUBTITLE Depending on the type of broadcast being transmitted, programmes can be viewed ...
Page 15 - Picture controls; Picture preferences
SET UP Picture position OK Quick Setup OK MENU Back EXIT Watch TV 2/2 15 Picture controls This television offers the choice of personalising the picture style. Press m to view the different styles available: Picture mode-1 to 3 are preset options and Picture mode-M stores your own settings: Use S or...
Page 17 - panel lock, the timer; The Timer; Panel lock
The Side Panel feature lightens or darkens the band each side of the screen when in 4:3 or 14:9 format. This helps prevent image retention of the band and can also make viewing in bright or dark conditions more comfortable. 17 Picture controls continued , panel lock, the timer Press Q to select On o...
Page 18 - Clock phase
18 PC settings – picture position, clock phase, sampling clock, reset 3 3 Use S or R to adjust until the picture clears. In the SET UP menu press Q until PC Setting is highlighted. Press OK to select, then Q to highlight Clock phase . Use S or R to adjust until the picture clears. 1 2 The Clock phas...
Page 19 - Input selection and AV connections; Input selection; INPUT signal selection
Input selection and AV connections 19 Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6for a clear view of the back connection recommendations. Most media recorders and decoders send a signalthrough the SCART lead to switch the television to thec...
Page 20 - Modes; Auto; will display; Fastext; will store your four favourite pages.; The; Navigating pages using Auto.; Navigating pages using LIST; Selecting modes
20 Text services – setting up, general information, Auto and LIST modes This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of viewing text – Auto will display Fastext , if available. LIST will store your four favourite pages. If Fastext is available ...
Page 21 - Text services; – control buttons; To hold a wanted page:
Auto. Press T to access index pages. The one displayed is dependant on the broadcaster. LIST Press T to return to the page currently stored on the RED button. Remember to cancel te xt before changing channels – press the 6 / 7 button twice. ☛ 21 Text services continued – control buttons Below is a g...
Page 22 - uestions; nswers
Below are the answers to some of the most common queries.For more information go to www.toshiba.co.uk A Check the mains switch is on and check allconnections. Check the television is not in standby mode. Why is there no sound or picture? Q A Check the volume has not been turned down orthat sound mut...
Page 23 - Why are there problems with text?; Cleaning the screen and cabinet...; Disposal...
23 Q uestions and A nswers continued A Good performance of text depends on a goodstrong broadcast signal. This normally requires a roof or loft aerial. If the text is unreadable or garbled,check the aerial. Go to the main index page of the text service and look for the User Guide . This will explain...
Page 24 - Specifications and accessories
Specifications and accessories Broadcast systems/channels PAL-I UHF UK21-UK69 PAL-B/G UHF E21-E69VHF E2-E12, S1-S41 SECAM-L UHF F21-F69VHF F1-F10, B-Q SECAM-D/K UHF R21-R69 VHF R1-R12 Video Input PAL, SECAM, NTSC 3.58/4.43 External connections EXT1 Input 21-pin SCART RGB, A/V EXT2 Input/Output 21-pi...
