Page 2 - SUMMARY
Page | 1 SUMMARY * I – CONNECTION TO YOUR ACCOUNT ............................................................................. 2 A) CREATE YOUR ACCOUNT ....................................................................................... 2 B) CHANGE YOUR PERSONAL DATA ...............................
Page 3 - – CONNECTION TO YOUR ACCOUNT; A) CREATE YOUR ACCOUNT; Your MyTOROTEMPUS account will allow you to:
Page | 2 I – CONNECTION TO YOUR ACCOUNT A) CREATE YOUR ACCOUNT Your MyTOROTEMPUS account will allow you to: • Automatically save your devices with their associated programs, in the app and the platform which guarantee you to always have access to your data in case of problems with your phone (loss, ...
Page 6 - D) CHANGE YOUR PASSWORD WHEN YOU ARE CONNECTED
Page | 5 D) CHANGE YOUR PASSWORD WHEN YOU ARE CONNECTED If you want to change your password, make sure you are already connected to your account. Then, enter your new password in the designated area.
Page 7 - A) BLUETOOTH ASSOCIATION; Once you get inside the App, select the
Page | 6 II – ASSOCIATION OF A LoRa DEVICE A) BLUETOOTH ASSOCIATION Once you get inside the App, select the “+ icon (or ‘’add a device” the first time). You can now choose the type of product you want to install: TEMPUS AG-CT: 9V battery operated device. TEMPUS AG-MS: 9V multi-sensor device. TEMPUS ...
Page 10 - B) LORA ASSOCIATION WITH A GATEWAY
Page | 9 B) LORA ASSOCIATION WITH A GATEWAY Follow the procedure from II.A in order to associate in Bluetooth your gateway TEMPUS AG-WF / TEMPUS AG 4G and LoRa devices. Select the device you want to pair with your gateway. Once inside the device, choose the pen logo on top right of the screen to act...
Page 12 - A) DEVICE INFORMATION AVAILABILITY; Wait until the connection test is completed.
Page | 11 III – PROGRAMMING OF A TORO TEMPUS AG-CT A) DEVICE INFORMATION AVAILABILITY As those products are working with a LoRa radio communication, the maximum distance between your gateway and LoRa devices is approximately 800m. Tap on the red icon to launch the connectivity check. Wait until the ...
Page 13 - B) WATERING PROGRAM; ) CYCLIC IRRIGATION; Select the station you want to parameter.
Page | 12 B) WATERING PROGRAM 1) CYCLIC IRRIGATION To create a program, select the device you want to parameter. Select the station you want to parameter.
Page 15 - Select the window you want to modify.
Page | 14 Each station is independent and can get a different periodicity or irrigation cycle regarding the others. Each station can get up to maximum 4 watering windows. Select the window you want to modify. When selecting “Add a window” you can now define a starting and ending time for watering du...
Page 17 - When your program is complete,
Page | 16 2) VOLUMETRIC AND RAINFALL PROGRAMMING The cyclic irrigation by volume or by rainfall can be managed only via the platform. Please refer to the MyTOROTEMPUS Platform User Manual. Repeat the same procedure for the other stations. When your program is complete, don’t forget to send it to the...
Page 18 - C) START A MANUAL PROGRAM; Select the station you want to activate.
Page | 17 C) START A MANUAL PROGRAM Select the station you want to activate. Select the device supposed to start.
Page 19 - Selection the manual operation function.
Page | 18 If your device is associated with a gateway and you want to open the station remotely, please consider a 3min LoRa synchronization delay. If you send the command to your product directly in Bluetooth, the manual command will start immediately. Select the duration and if you want a continuo...
Page 20 - D) MODIFY YOUR PROGRAM; Select the concerned device.
Page | 19 D) MODIFY YOUR PROGRAM Select the concerned device. Select the station you want to modify.
Page 22 - E) ADD SENSORS ON THE TEMPUS AG CT; Sensor Settings
Page | 21 E) ADD SENSORS ON THE TEMPUS AG CT 1) FLOWMETER 1.1) Sensor Settings Select the flowmeter. Your TEMPUS-AG-CT can be connected with a sensor (Either a flowmeter, a rain sensor or a pressure switch). Select “Add a sensor”.
Page 25 - Water consumption visualization
Page | 24 1.2) Water consumption visualization You can visualize the water volume consumption by checking data per live (last 24 hours), days, weeks, months or years. Select “settings” in order to define your thresholds. Select the new icon “Flowmeter” on your device which is displayed at the bottom...
Page 27 - LOW FLOW RATE
Page | 26 HIGH FLOW RATE: Maximum percentage of stations flow rates you don’t want to exceed. LOW FLOW RATE : Minimum percentage of stations flow rates you don’t reach. The alert for “High flow rate” or “Low flow rate” is sent immediately. Activate the high and low flow rate options. Enter the perce...
Page 30 - IMMEDIATE VALUE; : This feature displays the
Page | 29 You can also delete your sensor on this page with “Delete the sensor” if you want to remove it or parameter another one. This will be the same procedure for the other sensors (Rain Sensor and Pressure Switch). IMMEDIATE VALUE : This feature displays the water consumption instant value in l...
Page 32 - Cut the blue wire of your device.
Page | 31 Cut the blue wire of your device. Connect both blue wires according to the polarities of the ones of the rain sensor. Select ‘’Next’ option to access the following step. There is no automatic check on the wiring connection. Select “Great!” you can now access your sensor settings.
Page 33 - Sensors Threshold settings
Page | 32 2.2) Sensors Threshold settings Select the new icon “Rain Sensor” on your device which is displayed at the bottom of the screen You can visualize the rain level by checking data per live (last 24 hours), days, weeks. Select “settings” in order to define your thresholds.
Page 34 - : Select this option if you
Page | 33 3) PRESSURE SWITCH 3.1) Sensor settings High threshold means it is raining (the rain sensor is wet). Low threshold means raining has stopped (the rain sensor is dry). You can activate or disactivate the low and high threshold. Select the Pressure Switch. IMMEDIATE VALUE : Select this optio...
Page 40 - and then select “Next”.
Page | 39 Select the type of moisture sensor you want to install. Follow the wiring scheme of the type EC5-SOIL moisture sensor displayed on your app in order to connect it and then select “Next”. The wiring scheme depends on the type of sensor you have selected.
Page 47 - Select “Add a sensor”.
Page | 46 3) Pluviometer Select the high and low threshold in order to define their value in mph. Select “Add a sensor”. 0 mph