Toro PS90 - Manual

TS90 Series Sprinklers with Optional TurfCup™

June 2012

Specifying Information – TS90 Series Sprinkler

TS90TP-02

XX

-

X-E

Description

Threads

TurfCup™

Nozzle

Optional

TS90TP

02

XX

X

E

TS90TP—TS90TP 1” (25mm) Toro

with TruJectory

02—NPT thread

TC--TurfCup™ option 1, 2, 3, 4, 5, 6, 7, 8, 9

E–Effluent

Example:

A TS90 Series sprinkler with TruJectory, NPT threads, TurfCup™, and 82’ (25m) radius would be specified as:

TS90TP-02TC-6

Specifications

Radius: 53’-95’ at 25° (16,2 –
29,0m) trajectory

Flow rate: 14.0-61.5 gpm (53-233

lpm)

Precipitation rate: .56-.60”/hr

(14,2-15,2mm/hr)

Arc: Full- & Part-circle in one
-Full-circle: 360° unidirectional

clockwise rotation

-Part-circle: 40°-330°

Rotation Speed: 3 minutes ± 30
seconds

Recommended operating pressure

range: 40-100 psi (2,8-7,0 Bar)

Inlet size: 1” (40mm) NPT or BSP

Check valve capable of checking up
to 10’ (3m) of elevation difference

Rubber cover for personnel safety

and protection

Available in TurfCup™ versions

for seamless on-field installations

on natural and artificial turf sports

field installations

Effluent indicator plug for

installation on rubber cover

Dimensions, non-TurfCup
versions:

-Body height: 10” (254mm)

-Overall popped-up height: 12.5”
(317mm)

-Retracted height: 8.5” (216mm)

-Overall pop-up height: 4”

(402mm)
-Pop-up height to main nozzle: 3”

(75mm)

-Exposed cap diameter: 2.2”

(26mm)

-Body diameter: 4

” (402mm)

Dimensions, TurfCup versions:
-Body height: 10” (254mm)

-Overall popped-up height: 14.5”

(37mm)

-Retracted height: 10.7” (27mm)
-Overall pop-up height: 4”

(402mm)

-Pop-up height to main nozzle

from top of outer cover: 1”
(25mm)

-Body diameter: 4

” (402mm)

-Overall diameter with stabilizing

spacer: 6.25” (16mm)

Nozzle options: 9 main, 3

intermediate, 1 inner, 1 molded-in

inner (no molded in inner on
TurfCup™ versions)

Bidding Specifications

The sprinkler shall be of gear-
drive, rotary type, capable of

covering a _____ foot (meter) radius

at _____ PSI (bar; kPa) with a

discharge rate of _____ GPM (lpm).
The sprinkler shall be available with

nine (9) distinct main nozzles for

distance coverage, three (3) distinct

intermediate nozzles for mid-range
coverage, one (1) inner nozzle for

close-in coverage and one (1) molded

in inner nozzle (not available for

TurfCup™ versions) for mid-close-
range coverage. The nine (9)

different nozzle sets shall be formed

by combinations of the main,

intermediate and inner nozzles. The
main nozzle shall be adjustable from

7° to 30°, in 1° increments, from

horizontal. The option of a back

nozzle shall be available.

The sprinkler shall have both full-

circle and adjustable part-circle

operation in a single unit. The

sprinkler shall be minutely adjustable

from 40° to 360° in part-circle mode.
It shall be adjustable in all phases of

installation (i.e., before installation,

after installation while static, and

after installation while in operation).
When in 360° mode, it shall rotate

only in the clockwise direction. The

sprinkler shall be equipped with a

self-adjusting stator to ensure
constant rotation speed regardless of

nozzle installed.

The sprinkler shall have a clutch

mechanism to allow the nozzle turret
to be manually advanced to the ends

of its arcs, thus allowing quick

determination of arc limits, without

having to wait for the gear drive
mechanism to drive the nozzle turret

to the limits. The sprinkler shall have

hard arc limits that provide the

operator with positive end of arc
stops when manually advancing the

nozzle turret. The riser shall have a

ratchet feature that allows the entire

riser/nozzle turret assembly to be
rotated to a new position, when not

under water pressure.

The sprinkler shall be equipped

with a drain check valve to prevent
low head drainage, and be capable of

checking up to 10 feet in elevation

change. The sprinkler shall have a

minimum of 4-inch pop-up stroke to