Toro 136 7490 - User Manual

Toro 136 7490

Toro 136 7490 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – Preparing the Machine; No Parts Required; Park the machine on a level surface.; Shut off the engine and remove the key.; Preparing the Mower Deck; Parts needed for this procedure:; Procedure; Operator’s Manual; Figure 2
  • Page 3 – WARNING; Installing the Right Baffle; Figure 4; Figure 4
  • Page 4 – Tighten all fasteners.
  • Page 5 – . Tighten the fasteners; Tighten the fasteners by hand.
  • Page 6 – Installing the Kicker Baffles; Installing the Left Baffle; Install the left baffle as follows:
  • Page 7 – Install the mulching blades refer to the
  • Page 8 – Operation; Operating Tips; position. Air is required to
Loading the manual

Form No. 3416-558 Rev A

48in, 54in, or 60in Recycler

®

Kit

TimeCutter or TimeCutter

®

HD Riding Mower

Model No. 136-7488

Model No. 136-7489

Model No. 136-7490

Installation Instructions

WARNING

CALIFORNIA

Proposition 65 Warning

This product contains a chemical or chemicals known to the State of California

to cause cancer, birth defects, or reproductive harm.

Installation

Loose Parts

Use the chart below to verify that all parts have been shipped.

Procedure

Description

Qty.

Use

1

No parts required

Prepare the machine.

2

Filler plate (Timecutters with 60-inch
decks only)

1

Prepare the mower deck.

Right baffle

1

Baffle guard

1

Carriage bolt (5/16 x 3/4 inch)—48-inch
and 60-inch decks only

2

Carriage bolt (5/16 x 3/4 inch)—54-inch
decks only

4

Nut (5/16 inch)—48-inch decks only

5

Nut (5/16 inch)—54-inch and 60-inch
decks only

6

Bolt (5/16 x 3/4 inch)—48-inch decks
only

1

Bolt (5/16 x 1-1/4 inches)—60-inch
decks only

1

3

Spacer (60-inch decks only)

1

Install the right baffle.

Kicker baffle

2

4

Hex-washer-head bolt (5/16 x 3/4 inch)

4

Install the kicker baffles (48-inch decks
only).

© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420

Register at www.Toro.com.

Original Instructions (EN)

Printed in the USA

All Rights Reserved

*3416-558* A

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Manuals for Toro 136 7490

Summary

Page 2 - Preparing the Machine; No Parts Required; Park the machine on a level surface.; Shut off the engine and remove the key.; Preparing the Mower Deck; Parts needed for this procedure:; Procedure; Operator’s Manual; Figure 2

Procedure Description Qty. Use Left baffle 1 Carriage bolt (5/16 x 3/4 inch)—48-inchdecks only 1 Nut (5/16 inch)—48-inch decks only 3 Carriage bolt (5/16 x 3/4 inch)—54-inchand 60-inch decks only 1 5 Nut (5/16 inch)—54-inch and 60-inchdecks only 4 Install the left baffle. Decal 1 6 Mulching blade 3 ...

Page 3 - WARNING; Installing the Right Baffle; Figure 4; Figure 4

6. For all other machines, install the fasteners inthe same holes from which they were originallyremoved ( Figure 1 ). WARNING Open holes in the mower deck exposeyou and others to thrown debris. Debristhrown out of holes in the mower deckcan cause injury. • Never operate the machine withouthardware ...

Page 4 - Tighten all fasteners.

54-Inch Decks 1. Remove the nuts and bolts from the locationshown in Figure 5 . g209903 Figure 5 1. Nuts and bolts 2. Install the right baffle using 1 carriage bolt (5/16x 3/4 inch) and 3 nuts (5/16 inch) as shown in Figure 6 . Tighten the fasteners by hand. g209901 Figure 6 1. Nut—5/16 inch (3) 3. ...

Other Toro Models

All Toro Other