Tork E101B - Installation Manual
Tork E101B Switch – Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation Instructions and
- Page 3 – UNIT IS TO BE INSTALLED BY A LICENSED ELECTRICIAN
- Page 6 – DAYLIGHT SAVING TIME; then go to step 4.0. For dates other than standard USA
- Page 7 – TO MODIFY STANDARD USA; settings. NOTE: DATE will choose the week of the month; 4:01 SU S represents the first Sunday in April.; Press ENTER and the display will show:; settings. NOTE: DATE will choose the week of the; EXAMPLE: 10:L SU E represents last Sunday in; Press ENTER and the display will show the modified
- Page 10 – AFTER MAKING ANY CHANGES TO THE; MODE; TO GO TO RUN MODE; EVENT; TO UPDATE THE LOAD
E101B SINGLE 7/22/07 10:02 PM Page 1
MLI-203(REVA)
http://waterheatertimer.org/Tork-Digital-timers-and-manuals.html
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Tork
- Model
- E101B
- Document type
- Installation Manual
- Category
- Switch
- Language(s)
- English
- Pages
- 12
- Format
Summary
TABLE OF CONTENTS Section Page Installation Instructions and Capabilities . . . . . . . . . . . . . . . . . . . . 1 Key Functions . . . . . . . . . . . . . . . . . . . . 2 1.0 To Set The Clock . . . . . . . . . . . . . . . . . . 3 1.1 To Modify Clock . . . . . . . . . . . . . . . . . . 3 (After prev...
TORK MODELS E101B / E103B / E120B 24 HOUR DIGITAL TIME SWITCH R E A D I N S T RU C T I O N S C A R E F U L LY B E F O R EATTEMPTING TO INSTALL TIME SWITCH. SEEWARNING ON FRONT PANEL – Failure to comply with instructions could result in personal injury and/orproperty damage. INSTALLATION: UNIT IS TO ...
Press MONTH, DATE, and YEAR key to advance to the desired Month, date and year, then press ENTER. NOTE: The day of the week will be automatically set once the date is set. 2.1 TO MODIFY DATE Press MODE until the display shows DATE. Press MONTH, DATE and YEAR to modify present set- tings and then pre...
