Toastmaster PRO-OE3B3 - Manual
Toastmaster PRO-OE3B3 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PROGRAMMING THE TRANSMITTERS; To Program replacement or additional transmitters:
- Page 3 – TRANSMITTER BATTERY REPLACEMENT; from the bottom cover of the transmitter.
- Page 4 – ORDER FORM FOR 3 BUTTON TRANSMITTER; (New York state residents must include the appropriate sales tax.); Mastercard; * Make checks payable to Audiovox Corporation
128-6121
1 of 4
TRANSMITTER PROGRAMMING GUIDE
Model : PRO-OE3B3
The transmitters included with the security system have been pre-programmed
at the factory, with each button pre-assigned to control a specific function of the
security system. Although the security system in the vehicle has either a 3 or 4
channel receiver, depending on the model, the transmitters included with the
system are capable of transmitting 7 distinct signals. This allows you to program
each transmitter to more than one vehicle in two car families and also allows you
to change which button(s) control certain functions of the system.
(Example: Transmitter channel 5 can be programmed to activate Receiver
channel 2.) Refer to the chart below for access to each of the transmitter channels,
and for the standard factory button assignments.
Released 7-17-01.
Some of the more common accessories for these additional channels are;
AS 9554
Remote Garage Door Interface
AS 9075
Remote car starter
AS 9153
Remote window roll up
AS 9256
Remote trunk release relay
TRANSMITTER
SYSTEM RECEIVER
CHANNEL
BUTTON
CHANNEL
FUNCTION
Remote Arm
1
1
Remote Emergency Panic
Remote Door Lock
Remote Disarm
2
2
Remote Emergency Panic
Remote Door Unlock/Unlock 2
3
3
4
&
4
5
&
5
6
&
6
RF Channel For Options
7
7
RF Channel For Options
All 3
Buttons
Single Push Pulsed Output for Optional Accessory
Or Double Push For Additional Optional Accessory
Single Push Pulsed Output for Optional Accessory
Or Push And Hold For Extended Output
Single Push Pulsed Output for Optional Accessory
Or Push And Hold For Extended Output
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
128-6121 2 of 4 PROGRAMMING THE TRANSMITTERS It is important to remember that during programming, each individual step ofthe procedure must be executed within 15 seconds of the previous step.When the 15 second time limit is allowed to expire, the system will automaticallyterminate the programming mo...
128-6121 3 of 4 14. Press and release the valet push-button switch once.15. The dash LED will flash four times and the sounding device will beep four times, indicating the system is ready to accept programming for receiver'schannel 4. 16. Press and hold any button combination as shown on the front c...
128-6121 4 of 4 ORDER FORM FOR 3 BUTTON TRANSMITTER MODEL NO. PRO-OE3B3 IMPORTANT : To help us expedite your order, please print all of the information legibly, and mail this form and your payment according to the instructions below. Note: Order Pad # 70 if your Lock & Unlock Icons are White Ord...
