Toastmaster 3310X - Manual
Toastmaster 3310X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – USING YOUR IRON; Fabric; TEMPERATURE AND STEAM GUIDE
- Page 3 – the iron does not come in contact with the fabric.; USING AS A DRY IRON; iron to cool before cleaning the exterior or storing.; USING AS A STEAM IRON
- Page 4 – FILLING THE WATER TANK; The water tank should be emptied after each use. To do so:; DIAGRAM 5
- Page 5 – through the vents until the water tank is emptied.; DIAGRAM 6; STORING THE IRON; Unplug the iron and allow to cool completely.
- Page 6 – SERVICE INFORMATION; in the warranty statement.; ON E YEAR LIMITED WARRANTY; KEEP DATED SALES RECEIPT FOR WARRANTY SERVICE.
- Page 7 – ESPECIFICACIONES TÉCHNICAS; Tensión de alimentación o tensión nominal (Volts)
READ AND SAVE THESE INSTRUCTIONS
WARNING: A risk of fire and electrical shock exists in all electrical appliances
and may cause personal injury or death. Please follow all safety instructions.
Steam and Dry Iron
Use and Care Guide Model 3310X
I M P O RTANT SAFETY INSTRU C T I O N S
When using electrical appliances, basic safety precautions should always be
fo l l owed to reduce the risk of fire, electric shock and injury to persons, including
the following:
• Read all instructions before using appliance.
• Close supervision is necessary when appliance is used near children.
• This appliance is not for use by children.
• Do not operate any damaged appliance. Do not operate with a damaged
cord or plug, or after the appliance malfunctions or has been dropped or
damaged in any manner. Return appliance to the nearest authorized service
facility for examination, repair or mechanical adjustment.
• Do not immerse the iron in water or other liquid. See instructions for cleaning.
• Do not use outdoors or while standing in damp area.
• Use iron only for its intended use.
• The iron should be turned to MIN before plugging or unplugging from outlet.
N ever yank cord to disconnect from outlet; instead grasp plug and pull to
d i s c o n n e c t .
• Do not allow cord to touch hot surfaces. Let iron cool completely before
putting away. Loop cord loosely around iron when storing.
• A l ways disconnect iron from electr ical outlet when filling with water or
e m p t y i n g and when not in use.
• B u rns can occur from touching hot metal par t s, hot water or steam. U s e
caution when you turn a steam iron upside down — there may be hot water
in the reser voir.
• Do not leave iron unattended while hot or connected or on an ironing board.
• Position iron carefully on ironing board to avoid it from being knocked over.
SPECIAL INSTRUCTIONS
• This is a high wattage appliance. To avoid a circuit overload, do not operate
another high wattage appliance on the same circuit.
• If an extension cord is absolutely necessary, a 13 ampere cord should be
u s e d . Cords rated for less ampera g e may overheat.
• Care should be taken to arrange the cord so that it cannot be pulled or
tripped over.
• This appliance has a polarized plug (one blade is wider than the other).As a
safety feature, this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, re verse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature .
SAVE THESE INSTRUCTIONS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
USING YOUR IRON Note: Before you use your iron for the first time, you should flush the soleplatesteam vents to ensure that no stain is transferred onto fabric from residue pos-sibly left in the vents from the manufacturing process. To do this, see SELF- CLEANING/FLUSHING. 2 Fabric DelicatesNylonAce...
DIAGRAM 2 DIAGRAM 3 3 Tips: If you are unsure of a garment’s fabric content, start on a low setting andtest the iron on an area of the garment that does not show, such as a seam.Gradually increase the heat setting until wrinkles remove without damaging thefabric. To freshen up garments made of velve...
4 DIAGRAM 4 5. Turn the temperature control dial to STEAM. Diagram 2.6. Allow approximately 2 minutes for the iron to reach the desired tempera- ture. (The ready light will turn off.) 7. Turn the variable steam dial counter clockwise to the desired amount of steam. Diagram 3. As soon as the iron is ...
