TITTLA KMJRIM156-U - User Manual

Page 2 - IMPORTANT SAFETY REGULATIONS

1 IMPORTANT SAFETY REGULATIONS When using electrical appliances, basic safety precautions should be followed to reduce therisk of fire, electric shock and injury to persons or property. Please read all instructionsbefore operating the machine for the first time. CAUTION: ICE CANNOT BE STORED IN THE ...

Page 6 - ) Installation and Connection

Page 7 - Operation Instruction

6 3) Control Panel Operation Instruction Plug in and turning on the switch on the back of the main machine will make the machine enter intostandby mode; The screen will be locked automatically after not operating any button for 60seconds, hold any button for 3 seconds to unlock the screen. If the ma...

Page 11 - ) Water Supply and Drainage Connections

10 5) Water Supply and Drainage Connections Warning: the ice machine should only be connected to a drinking water source and the water source must meet the local drinking water standard. - The water supplied to the ice machine must be connected with a filter to improve the drinkingstandard of the wa...

Page 12 - Installation and Connection; The machine must stand for 24h before power on.; Pre-filter installation; Operation in Struction; hygiene of the ice, please follow the following principles:

11 Installation and Connection WARNING: The machine must stand for 24h before power on. Install the machine according to the manual. 1)Unpack the Main Machine and Ice BinNote: Installation must be carried out by a professional according to the instruction manual. Warning: Please do not use foam and ...

Page 13 - ) Prepare the long-term preservation for the ice machine; Cleaning & Maintenance; CAUTION; What Shouldn’t Be Done

12 removing the ice, close the door to prevent dust from entering. 2. The use of any electrical appliance should follow the basic guidelines, in particular: ● The environment with high humidity will increase the risk of a short circuit or electric shock, if in doubt, please cut off the power of the ...

Page 14 - Interior Cleaning; For Ice Storage Bin; Cleaning Suggestion; QUARTERLY CLEANING

13 NOTE: Stainless steel models exposed to chlorine gas and moisture, such as in areas with spas orswimming pools, may have some discoloration of stainless steel. Discoloration from chlorine gas isnormal. Interior Cleaning For Ice Storage Bin The ice storage bin should be sanitized occasionally. Cle...

Page 15 - Trouble Shooting; Inspection items

14 Trouble Shooting 1) No Ice Making Faultphenomenon Inspection items Possible causes Solutions Ice machineis not running Power cord Not plugged in the socket Plugged in the socket Control panel fuse Fused or damaged Check and replace. Storage bin The ice is full, and the icecubes press the evaporat...

Page 16 - ) Low Ice Production; Circuit Diagram

15 2) Low Ice Production Fault phenomenon Inspection items Possible causes Solutions Ice making time is too long Water pressure of water supply The water pressure is too low, and the water supply time is too long each time Increase water pressure Water temperature Water temperature too high Lower wa...

Page 17 - After Sale Service

16 After Sale Service 1. If your product breaks down or has any problems after purchase, please contact us, you canalways contact our customer service by email at [email protected]2. Regarding any product problems or issues you encounter, our customer service will guide youthrough the entire service...

TITTLA KMJRIM156-U - User Manual

Table of Contents:

Summary