TI 31918 - Manual
TI 31918 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
ASSEMBLY AND MOUNTING INSTRUCTION
For 31918
Please read the Assembly lnstruction sheet carefully before proceeding.Carefully unpack and
identify all parts prior to building the unit. Each part is identified on the drawing for reference.
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must return the item
for any reason. Please repack the unit using the original carton and inserts.
STEP 1:Unpack all the parts and Classify them
according to the illustration shown at the
side.Place the parts on a scratch free surface;
STEP 2:Make sure the power is turned off at the
junction box where the fixture is to be
installed.Secure the cross bar to the ceiling
junction box using junction
box screws;
STEP 3:Use the wire nuts to connect the positive
and negative wires.Connect the ground wire to the
junction box ground port;
STEP 4: Secure the canopy to the ceiling with The
knurled ring;
STEP 5:Buckle the Quick Link to the Loop;
STEP 6:Install the Loop to the Fixture;
STEP 7: Install the center column to the fixture;
STEP 8:Attach the center rod bottom with Column
the bottom cap and finial;
STEP 9: Install candle cover and fabric shade as
shown ;
STEP 10: Install the correct bulbs not provided.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
