Thomson CS300 - Manual

EN Getting Started Unpacking the system: You should have the following: • one main unit (with 2 main speakers); • one remote control; • one user’s guide; • AM loop antenna;• FM wire antenna • one Thomson warranty card Back View 1. Main Speaker Jacks2. Line Out Connector3. Aux In Connector4. AM Anten...

3 General Controls Main Unit Front Panel ON/ECO — In ECO mode, Keep pressing more than 3 seconds to enter STANDBY mode. In STANDBYmode, keep pressing more than 3 seconds to enterECO (power saving, without clock display) mode. SOURCE - Selects tuner / tape / aux / CD player. DIM/DEMO - Turns the feat...

4 General Controls Remote Control ON/ECO - Keep pressing more than 3 seconds to enter ECO (power sav- ing, without clock display) mode. In ECO mode, Keep pressing more than3 seconds to enter STANDBY mode. DISC1 / DISC2 / DISC3 - Selects disc 1, 2 or 3 playback. NUMBER/CHARACTER KEYS — Accesses diffe...

5 Display Settings EN Display Showing the Demonstration Operational in standby mode only. Press DEMO on the main unit to turn on/off demonstration mode.The demonstration scrolls through all display operations. Display Clock / Timer Setting the Clock 1. Press and hold CLOCK to enter clock setting mod...

6 EN CD Player Random Playback Press • CT to turn on/off the playing of tracks in random order. The mix icon will show on the display. Sampling Tracks Press INTRO to play the first 10 seconds of each track on the current disc, all discs in the tray, or turn INTRO mode off. (Remote only). Repeat Pres...

EN Sound Features Using Preset Equalizer Curves Press EQ to toggle among ROCK, JAZZ, FLAT , POP and CLASSIC . The display shows briefly the selec-tion. X-BASS Press X-BASS to turn on/off boosting the bass frequency. Volume Control Press VOL or to adjust volume level. Muting Audio Press MUTE on the r...

8 EN Radio Selecting Tuner Band 1. Press SOURCE on the main unit or TUNER on the remote control to enter Tuner mode. 2. Press BAND/APP to select between FM, MW or LW radio band. Tip : Your audio system has 40 preset stations. Tuning to a Station Press SKIP FORWARD / SKIP BACKWARD on the main unit or...

9 EN Tape Player Playing a Tape 1. Press SOURCE on the main unit repeatedly or TAPE on the remote to enter Tape mode. 2. Press on the PUSH OPEN/CLOSE area of the cassette door to open it. 3. Insert a tape into the door and push the door closed. VFD will display “CA 0000”. 4. Press SKIP BACKWARD or S...

10 EN Troubleshooting Tips Solution • Check power cord for a secure connection.• Unplug the unit for a moment, andthen plug into power source again.• Check the outlet by plugging inanother device. • Increase the volume setting.• Check connection to speakers.• Check that you have selected theappropri...

11 EN Maintenance Disconnect the audio system from the power sourcebefore performing any maintenance. Cleaning Clean the exterior of the system using a soft dustcloth. CD Player CAUTION! This system operates with a laser. It must be opened by only a qualified technician. Tape Player To prevent deter...

12 Safety Precautions • Never open the cabinet under any circumstances.Any repairs or internal adjustments should be madeonly by a trained technician.• Never operate this product with the cabinetremoved.•Do not use your System immediately after transport-ing it from a cold place to a warm place, as ...