Thermo Pride USDT 2004B - Manual

Thermo Pride USDT 2004B

Thermo Pride USDT 2004B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
Page: / 10

Table of Contents:

  • Page 2 – Introduction
  • Page 3 – INSTALLATION
  • Page 4 – Sensor cable extension:
  • Page 5 – Base of the unit to be mounted at eye -level and wired as shown above
  • Page 6 – BASIC OPERATION OF DIGITAL; our; Lower Line Display; during programming mode
  • Page 10 – roubleshooting; Overheating protection
Loading the manual

USDT 2004B

Installation and User’s Guide

Introduction

General Information

2


Installation

Collector Sensor

3

Control Box

5

Power Connection

6

Display Window

6


Operation

Basic Operation of Digital Display

6

Programming the Temperature Range

8

Manual Operation Mode

9

Troubleshooting

10

Thermo Technologies

5560 Sterrett Place • Suite 115

Columbia, Maryland 21044

Phone 410.997.0778 • Fax 410.997.0779

e-Mail [email protected]

Basic Revision 8, January 2006

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Introduction

2 Introduction Note: The information supplied in this manual is for guidance only - no part of this may be used for any agreement, whether express or implied, or to form any contract. Thermo Technologies reserves the right to change specifications without prior notice. SDT 2004B is a powerful temper...

Page 3 - INSTALLATION

3 INSTALLATION Note: This installation procedure is for guidance only, and the installer should verify its suitability. Make sure that the solar system is physically installed, manually tested, and ready for controlled operation. he following safety precautions is strongly recommended: 1. Before att...

Page 4 - Sensor cable extension:

4 l Collector sensor (red cable with protective terminal box): Either push into a thermowell, (sensor pocket), which is soldered or riveted directly to the manifold (vacuum tubes). Alternately, strap the sensor to the collector outlet pipe or the absorber (flat plate collectors) that projects from t...

Other Thermo Pride Models

All Thermo Pride Other