Telex BKP-4 - Manual - manualsarea.com

Page 2 - Technical questions should be directed to:; PROCEDURE FOR RETURNS

2 User Instructions BKP-4, TKP-4, and WKP-4 Keypanels PROPRIETARY NOTICE The RTS product information and design disclosed herein wereoriginated by and are the property of Telex Communications, Inc.Telex reserves all patent, proprietary design, manufacturing, repro-duction, use and sales rights there...

Page 4 - This page intentionally left blank.

4 User Instructions BKP-4, TKP-4, and WKP-4 Keypanels This page intentionally left blank.

Page 5 - TABLE OF CONTENTS; DESCRIPTION AND SPECIFICATIONS · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

User Instructions BKP-4, TKP-4, and WKP-4 Keypanels 5 TABLE OF CONTENTS DESCRIPTION AND SPECIFICATIONS · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 7 GENERAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 8 - 1) Intercom Frame Connectors. All units have both

1.4 BACK PANEL / CIRCUIT BOARDSWITCHES AND CONNECTORS 10) BKP-4: Universal Power Input: Accepts any mains voltage from 90-240 VAC, 47-63 Hz. TKP-4 and WKP-4: Terminals for DC power con- nection. 11) Intercom Frame Connectors. All units have both 9-pin female Dsub (DE9S) and RJ12 connectors.The TKP-4...

Page 9 - SPECIFICATIONS

1.5 SPECIFICATIONS Matrix Input/ Output 8 dBu nominal, 20 dBu maximum Audio Performance SNR at 8 dBu (A-weighted): > 70 dBTHD+N at 8 dBu (Unweighted): < 0.5%Frequency Response at 8 dBu: ± 1.5 dB from 100 Hz - 20 kHz CMRR: > 70 dB Panel Mic Input Mic Type: Electret condenserPower: Phantom (+...

Page 10 - If you change any configuration switch

2 INSTALLATION 2.1 UNPACKING AND INSPECTION As soon as possible after receipt, inspect the container andcontents for physical damage that may have occurred inshipping. If damage has occurred, immediately (within 24hours of receipt of equipment) contact the carrier involvedand file a claim. Save all ...

Page 11 - Always reset the keypanel after changing the; Zeus Intercom Systems:; Intercom port connectors on the; ADAM CS Intercom Systems:; You

Closed: keypanel cannot answer incoming calls toTIF-951. Description: The keypanel can answer incoming tele-phone calls received by an RTS Model TIF-951 Tele-phone Interface. However, it cannot perform any othertelephone operations. For example, it cannot force theTIF-951 to hang up at the end of a ...

Page 12 - TWISTED PAIR TELEPHONE CABLE; Figure 5. RJ12 Intercom cable wiring diagram

• ADAM CS frame with 50-pin Telco back panel: You can determine the keypanel address from theworksheet in either of two ways: 1) If you know theport number that a keypanel will be connected to,look up the port number in the worksheet, then readacross to the appropriate logical keypanel number fortha...

Page 13 - Always reset the keypanel after changing; TO KEYPANEL; Figure 9. Call Waiting Window and Key

2.5.4 Power Connection BKP-4: Plug an power cord (not supplied) into the powerconnector and into any 90-240 VAC, 47-63 Hz mainpower source. TKP-4 / WKP-4: Connect an optional AC adapter usingthe color-code information on the AC adapter and the ter-minal pinout information in Figure 7 . Alternatively...

Page 14 - Assign intercom keys at the keypanel as follows:; CLEARING KEY ASSIGNMENTS; Clear; Scroll; Figure 10. Scroll, Copy and Clear Buttons

3 KEYPANEL SETUP 3.1 ASSIGNING INTERCOM KEYS You can assign keypanel intercom keys using ZEUSeditor ADAMedit. For help with key assignment in ZEUSeditor ADAMedit, click the KP button on the program'stoolbar, then press the F1 key on the computer keyboardfor help. If your keypanel has Copy, Clear, an...

Page 16 - Intercom Key Indications

4.2.2 Intercom Key Operation for DifferentTypes of Key Assignments Basic Talk and/or Listen Key Operation: The down po- sition activates talk (if assigned). The up position acti-vates listen (if assigned). Talk and listen may be latchedon or off independently by tapping up or down. ☞ The following p...

Page 17 - DISPLAYING KEY ASSIGNMENTS; Release the call waiting key when finished.; DISPLAYING THE PORT NUMBER; Hold down the Call Waiting key.

3. Continue talking to callers and clearing their namesuntil the call waiting window displays dashes (nocallers). Also, when all calls have been answered, thegreen LED next to the call waiting key will turn off. 4.4 OPERATION WITH THE TIF-951TELEPHONE INTERFACE If DIP switch 3 (page 10 ) is set to t...

Telex BKP-4 - Manual

Table of Contents:

Summary

Other Telex Models