Teledex B4506 - Manual - manualsarea.com

Page 3 - SAFETY INSTRUCTIONS; and; FCC INFORMATION

Interference Information: Part 15 of FCC RulesThis equipment generates, uses, and can radiate low-level radio frequency energy. Ithas been tested and found to comply with the limits for a Class B digital device inaccordance with the specifications in Part 15J of the FCC Rules, which are designed top...

Page 4 - GETTING STARTED; SAVE THESE INSTRUCTIONS; IMPORTANT SAFETY INSTRUCTIONS

PACKAGE CONTENTS Check to be sure that you have all the following components in the package:1. Telephone base 2. Handset 3. Handset coiled cord 4. 4 conductor telephone line cord (qty. 2) 5. Short telephone line cord 6. Desk/Wall mount bracket 7. AC power adapter 8. Screwdriver for battery door 9. T...

Page 6 - Volume Up and Down Keys [; LCD Displays; is used to begin or end a call using the speaker or; If the LED is off, the speakerphone; LOCATION OF CONTROLS AND FEATURES; 0 TOTAL CALLS

Conference Key [CONF]Used to join lines on hold to an active line to make conference call. Volume Up and Down Keys [ ] [ ] Press to increase or decrease speakerphone, handset, headset or ringervolume between four levels. New Call IndicatorThe New Call Indicator flashes slowly to indicate there are n...

Page 7 - Selecting a Location; Near a telephone line wall jack; Installing the battery; Loosen the screw fastening the battery; Connecting Your Phone Lines; Single Line Jacks; INSTALLATION

12 Selecting a Location The phone may be used on a desk or mounted on a wall. Select a locationthat meets the following requirements: 1. Near an electrical outlet. 2. Near a telephone line wall jack 3. Away from any electrical machinery, appliances, and metal walls or filing cabinets. Installing the...

Page 9 - Programming the Telephone Settings; TELEPHONE SETUP

8. Press [Down] or [PREV] to decrease the setting, [UP] or [NEXT] toincrease the setting, or use the dial pad to key in the value (press [1] forAM and [2] for PM). The default time/date setting is 12:00 am 1/01. Therange of Time/date settings is 12:00am 1/01 – 11:59pm 12/31. The localclock will also...

Page 10 - Making or Answering a Call; the handset in the cradle.; Last Number Redial; Repeat the same procedure for the other three lines.; Tip: If within your local area you are required to dial 10; Follow the same procedure for regional area code 2-6

Making or Answering a Call Using auto-line selection:1. Press [SPEAKER] or pick up the handset. The B450D will select an appropriate line and connect the line. The call timer will start 2 secondsafter the phone is connected to the line. 2. To end the phone call, press the active line, press [SPEAKER...

Page 11 - number of memories stored in the directory.; SPEED DIAL; EDIT NUMBER

Reviewing one-touch memory 1. Press and hold a one-touch memory key (eg. [M1]). The display will show the name and number stored in that location. Note: Be careful. Releasing the button too soon will dial the number.2. If you wish to dial the number, either press the same memory key again, press [DI...

Page 12 - Note: Repeat calls on the same telephone line will not; Caller ID Callback; JOHN SMITH

Saving Caller ID to Speed Dial Memory 1. During caller ID review, the LCD will display a Caller ID entry. If the dial format is not correct, press [CDF] to change the dialformat. 2. Press [SAVE]. The display will ask “Save to?”3. Press either a one-touch memory location (eg. [M1]) or [DIR], whicheve...

Page 13 - temporary tone dialing ends when you terminate the call.; Speaker LED indicator will light.; ADDITIONAL FEATURES

Mute 1. To mute the speakerphone, headset, or handset microphone, press [MUTE]. The Speaker LED will flash and the display will say “MUTE.” 2. To un-mute the microphones, press [MUTE] again. The display will briefly show “Mic On.” Tone If you have Pulse telephone service, you may find it necessary t...

Page 14 - Note: This function requires voice mail subscription; MESSAGE WAITING

Your B450D telephone has been designed to give years of trouble-free service.It is a sensitive electro-mechanical instrument. To assure its longevity, pleaseread the following maintenance instructions: 1. Keep the B450D away from heat as high temperatures can shorten the life of the electrical compo...

Page 15 - TROUBLESHOOTING

No dial tone. The phone will not dial out.• Check that you have plugged the AC power adapter into a working ACpower outlet. • Confirm that the AC power adapter is firmly plugged into the DC jacklocated on the back of the unit. • Check all telephone cord connections. • Try another wall jack. Can’t he...

Teledex B4506 - Manual

Table of Contents:

Summary

Other Teledex Models