Page 2 - English; Contents
English - 1 - Contents Features ................................................................. 2Accessories ............................................................ 2Introduction ............................................................. 2Preparation ..........................................
Page 3 - Features; nition; Accessories; Remote; Introduction
English - 2 - Features • Remote controlled colour LCD TV.• Fully integrated digital TV (DVB-T). • HDMI connectors for digital video and audio. This connection is also designed to accept high de fi nition signals. • 200 programmes from VHF, UHF(analogue).• 300 programmes for digital mode (IDTV). • OS...
Page 4 - Safety Precautions; fl
English - 3 - Safety Precautions Please read the following recommended safety precautions carefully for your safety. Power Source The TV set should be operated only from a 220-240 V AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience. Power Cord Do not place the...
Page 5 - Headphone Volume; lm transistors, giving you; Warning; nitely recommend to
English - 4 - Headphone Volume E x c e s s i v e s o u n d p r e s s u r e f r o m earphones and headphones can cause hearing loss. Installation To prevent injury, this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the opti...
Page 6 - Overview of the Remote Control
English - 5 - Overview of the Remote Control A B C A B C A B C DEF DEF DEF GHI GHI GHI JKL JKL JKL MNO MNO MNO PQR PQR PQR STU STU STU VWX VWX VWX YZ YZ YZ 1 2 3 4 5 6 7 8 9 0 AV AV S O U R C E S O U R C E EXIT EXIT EXIT - / - - - / - - I N F O I N F O I N F O I-II I-II MENU MENU TV/DTV TV/ DTV TV/D...
Page 7 - LCD TV and Operating Buttons; buttons; Viewing the Connections- Back Connectors; If an external device is connected via the; SCART; socket, the TV will automatically switch to AV
English - 6 - MENU TV/AV P/CH MENU TV/AV P/CH LCD TV and Operating Buttons Standby button 1. TV/AV button 2. Programme Up/Down buttons 3. Volume Up/Down buttons 4. Note: Press “ ”/“ ” buttons at the same time to view main menu. Viewing the Connections- Back Connectors SCART socket 1. inputs or outpu...
Page 8 - You should; Viewing the Connections - Side Connectors; “Conditional Access”; Aerial Connection
English - 7 - S/PDIF Out 4. outputs digital audio signals of the currently watched source. Use an S/PDIF coaxial cable to transfer audio signals to a device that has S/PDIF input. You should also set SPDIF Out option in the Sound Menu as On. RF Input 5. connects to an antenna or a cable. Note that i...
Page 9 - Power Connection; IMPORTANT; Connecting to a DVD Player; Note; : These three methods of connection perform the; Using Side AV Connectors; Using Other Connectors; You should also set SPDIF Out option
English - 8 - Power Connection IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz. • After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. • Plug the power cable to the mains socket outlet. Connecting to a DVD Player If you ...
Page 10 - Remote range is approximately 7m/23ft.; Switching the TV On/Off; To Switch the TV On; To Switch the TV Off; switch; To power; Input Selection; Source
English - 9 - Connecting Other Equipment via Scart Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a decoder to your LCD TV by using the SCART socket. Note that cables shown in the illustration are not supplied. Power off both the TV and the devices before making any...
Page 11 - Basic Operations; Operation with the Buttons on the TV; buttons at the same time to view; AV Mode; Operation with the Remote Control; Volume Setting; Initial Settings; OK; buttons, set active antenna
English - 10 - Basic Operations You can operate your TV using both the remote control and onset buttons. Operation with the Buttons on the TV Volume Setting • Press “ ” button to decrease volume or button to increase volume, so a volume level scale (slider) will be displayed on the screen. Programme...
Page 12 - Analogue search; General Operation; Press the; SOURCE; button on the remote control; Information Banner; for a few; INFO; If there is no event information data; EPG
English - 11 - After Automatic Search is completed, the following message asking for analogue channel search appears on the screen: To search for analogue channels, select “Yes”. TV switches to the analogue TV mode. Analogue search menu will be displayed. Select your Country, Language and Text langu...
Page 13 - the programmes; SWAP; on the remote control to; Displaying Subtitles; Analogue Teletext; TELETEXT; Widescreen; PLEASE NOTE; Dijital TV Menu System; Channel List
English - 12 - R E D b u t t o n ( S h r i n k ) : m a k e s t h e i n f o b o x e s smaller. GREEN button (Expand) : makes the info boxes larger. Y E L L O W b u t t o n ( P r e v. D a y ) : d i s p l a y s t h e programmes of previous day. BLUE button (Next day) : displays the programmes of the ne...
Page 15 - Setting Favourites; How to Add a Channel to a Favourites List; Programme Guide; Timers; GREEN; Conditional Access
English - 14 - lock a channel you should know the parental lock password (default value is set to 0000 in the factory and can only be changed from the Con fi guration menu). Select the channel to be locked by highlighting it and select the Lock option by pressing “ ” or “ ” button. When the OK butto...
Page 16 - TV Setup; Con; * for EU countries only
English - 15 - Some Digital Terrestrial channels operate on a Pay Per View basis. These require a subscription and a hardware decoder.Obtain the Conditional Access Module (CAM) and the viewing card by subscribing to a pay channel company, then insert those to the TV using the following procedure. • ...
Page 18 - Preferred
English - 17 - Set PIN Use “ ” or “ ” buttons to go to “Set PIN” option. Press OK to display the “Set PIN” window. Use numeric buttons to enter new pin number you will need to input your new pin a second time for veri fi cation purposes. The factory default pin number is 0000, if you change the pin ...
Page 19 - Language Settings; Installation; Automatic Channel Scan
English - 18 - Note: If the Country option is set to Denmark, Sweden, Norway or Finland, the Language Settings menu will function as described below: Language Settings In the con fi guration menu, highlight the Language Settings item by pressing “ ” or “ ” buttons. Press OK and Language Settings sub...
Page 20 - Analogue TV Menu System; Picture Menu; Mode; option can only be visible when the TV; Colour Temp; • Setting
English - 19 - In both manual and auto search any existing channel in the database is not re-stored to avoid redundant duplicates of that channel. Clear Service List (*) (*) This setting is visible only when the Country option is set to Denmark, Sweden, Norway or Finland. Use this setting to clear c...
Page 21 - Reset; Sound Menu
English - 20 - Noise Reduction If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting to reduce the noise amount. Press “ ” or “ ” button to select Noise Reduction. Press “ ” or “ ” to choose from one of these options: Low , Medium , High or Off . Film Mode Films are r...
Page 22 - Feature Menu; control
English - 21 - Headphone Press “ ” or “ ” button to select Headphone . Press “ ” button to view the headphone menu. Note: Headphone will be disabled when SPDIF option is set to on. Headphone sub-menu options are described below: Volume Press “ ” or “ ” button to select Volume . Press “ ” button to i...
Page 23 - Backlight; to; Maximum; Minimum; or; Persian; Install Menu
English - 22 - Menu Background Press “ ” or “ ” button to select Menu Background . You can set menu background level by pressing “” or “ ” button. Backlight This setting controls the backlight level. Select Backlight by pressing “ ” or “ ” button. Press“ ” or “ ” button to set Backlight to Auto, Med...
Page 24 - Store; Program Table; Name; move; Delete; Country; Source Menu
English - 23 - Colour System Press “ ” or “ ” button to select Colour System . Use “ ” or “ ” button to change the colour system to PAL, SECAM, PAL60, AUTO, NTSC 4,43 or NTSC 3,58. Store Press “ ” or “ ” button to select Store Programme . Press “ ” or OK button to store the settings. “ Stored... ” w...
Page 25 - Displaying TV Information; Mute Function; quit; Zoom Modes; Auto
English - 24 - In source menu, highlight a source by pressing “ ” or “ ” button and switch to that mode by pressing “ ” button. Source options are; TV , DTV, EXT-1 , FAV , HDMI-1 , HDMI-2 and YPbPr Note : Once you have connected optional equipment systems to your TV, you should select the required i...
Page 26 - This option zooms to the picture.; Teletext; Teletext function buttons; Your TV supports both; FASTEXT; and; TOP text; system is available, sections in; Tips
English - 25 - Cinema This zooms up the wide picture (16:9 aspect ratio) to the full screen. Subtitle This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen. Zoom This option zooms to the picture. Note: You can shift to screen up or down by pressing “ ” / “ ” buttons wh...
Page 27 - No Picture; Remote Control; Products; Notice
English - 26 - Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial.Is the picture or teletext unrecognisable? Check if you have entered the correct frequency. Please retune the channels.The pictu...
Page 28 - Speci
English - 27 - Speci fi cations TV BROADCASTING PAL/SECAM B/G D/K K’ I/I’ L/L’ RECEIVING CHANNELS VHF (BAND I/III)UHF (BAND U)HYPERBAND Digital Reception MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Pro fi le 1 for UK Object carousel support compliant with ISO/IEC 135818-6 and UK DTT pro f...
Page 29 - re, replace only with same type and rating of fuse (ASTA
English - 28 - Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : IMPORTANT As the colours of the wires in the...
