Page 2 - IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instr...
Page 3 - Contents; Getting started
ENGLISH CAUTION < DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE WITHIN! < IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT TEAC FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED. < USE OF CONTROLS OR ...
Page 4 - Before Using the Unit; Read this before operation
Before Using the Unit Read this before operation < As the unit may become warm during operation, always leave sufficient space around the unit for ventilation. < The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matte...
Page 5 - Connection; CAUTION
Connection CAUTION < Switch off (standby) the power before making connections. < Read the instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, do not bundle the connection cords . A AC power cord B Phones jack C L...
Page 6 - Battery replacement
Connection A AC Power Cord Be sure to connect the power cord to an AC outlet which supplies the correct voltage. Hold the power plug when plugging or unplugging the power cord. Never pull or yank on the power cord. B Phones jack F o r p r i v a t e l i s t e n i n g , f i r s t re d u c e t h e v o ...
Page 7 - ENGLISH; Unit Functions; N E Q
ENGLISH Unit Functions NOTE : To simplify explanations, instructions in this manual refer to the names of the buttons and controls on the front panel only. Associated controls on the remote control will also operate similarly. VOLUME STAND BY/ON MEMOR Y CLO CK ADJ SLEEP PRESE T MUTING ALARM 2 EQ ALA...
Page 9 - Display; Remote Control Unit
ENGLISH Display A iPod or iPhone indicator B HD Radio indicator C FM STEREO indicator D Band FM/AM, clock, AM/PM indicator E Time/Frequency Readout F SLEEP indicator G ALARM 1 indicator H ALARM 2 indicator I RBDS Messages/FUNCTION indicator B E G F H I D A C The provided Remote Control Unit allows t...
Page 10 - Insert the adapter into the Dock of the HD-1.; Compatible iPod Software; Power Source; Protect your Furniture
10 The HD-1comes mounted with an adapter for iPod with “iPod classic(160G)+iPhone 2G/3G”. To play your iPod through the HD-1, you have first to check if the factory mounted adapter fits your model of iPod. If it does not, you have to replace it with a correct one, as explained below. 1 Remove the ad...
Page 11 - EQ FUNCTION; MUTING FUNCTION; MUTING; Basic Operation; POWER ON; VOLUME UP
ENGLISH 11 EQ FUNCTION Press the EQ button to select ROCK, POP, CLASSIC, JAZZ, BASS or NORMAL for the desired sound effect. MUTING FUNCTION To mute the sound temporarily, press the MUTING button. Press the MUTING button again to restore the sound. < The "MUTE" indicator lights on the disp...
Page 12 - Listening to the Radio; Storing Preset Stations
1 Listening to the Radio Extend the FM wire antenna fully for best reception (do not strip, alter or attach to other antennas). The AM loop antenna should be placed up to 12" away from the unit for best reception. Rotate the AM loop antenna as required for best reception. 1 Press the STANDBY/ON ...
Page 13 - HD TAG; HD Radio stations; HD TAG; Support iTunes Tagging function
ENGLISH 1 To select FM or AM , press the FUNCTION/WAKE TO button. You can listen to your favorite radio stations on this unit by turning the TUNING/SELECT knob (or pressing . or / on the remote control). When an HD Radio signal is received, the HD icon lights on the display. NOTE : • When an analog ...
Page 14 - Listening to your iPod or iPhone; FUNCTION; Using your iPhone; Docking an iPod to this system; iPod video output
14 Listening to your iPod or iPhone 1 Insert the iPod or iPhone into the Dock 2 Press the STANDBY/ON button to turn on the unit. 3 To select iPod mode Press the FUNCTION/WAKE TO button (or press FUNCTION button on the remote control) to select iPod mode. You will hear the music playing from your iPo...
Page 15 - LINE Out Operation; LINE OUT; Listening to a non-docking iPod or other portable audio devices; DEVICE
ENGLISH 1 3 Turn on and play your device. 4 Turn the VOLUME knob on the unit (or press Volume+/- buttons on the remote control) to adjust the system volume. You may need to adjust your device volume, too. When using the PHONES jack of your mini player, you must adjust the volume of the mini player o...
Page 17 - DIMMER function; Snooze/Dimmer Operation
ENGLISH 1 DIMMER function You can change the front panel’s display brightness. Use the DIMMER button to change the brightness among 4 levels. You can change display brightness by using DIMMEN botton. How to use the snooze function After the ON time is reached, press the SNOOZE button and the unit wi...
Page 18 - Specifications; TUNER Section; Sleep Operation; SLEEP
1 1 When the HD-1 is OFF or while listening to your iPod or the radio, press the SLEEP button to enter sleep mode. 2 You can adjust the sleep timer from 120, 90, 75, 60, 45, 30, 15 minutes by pressing the SLEEP button again. • By the "SLEEP" mode, the" " icon is blinking on the displ...
Page 19 - General; Troubleshooting
ENGLISH 1 If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center. General The unit does not turn on. The AC plug may not be connected properly. Check the connection. The wall outlet may not functi...
Page 20 - TEAC CORPORATION
Z This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records.Model number Serial number SKTE -T0811002 PREPARED IN CHINA NOV 2008 TEAC CORPORATION 1-47, Ochiai, Tama-shi, Tokyo 206-8530, Japan Phone: (042) 356-9155 ...
