Page 3 - Safety Precautions; To prevent fire or shock, do not expose the unit to moisture or rain.; Copyright and Trademark Information
TEAC 1x10 DVD Duplicator User’s Manual i Safety Precautions TEAC DVD Duplicator systems are high-precision electronic devices. Do not use them in any manner other than as specified in this manual. Please read this manual in its entirety before you begin the installation procedure. Use of controls, a...
Page 4 - About This Manual; This
ii TEAC 1x10 DVD Duplicator User’s Manual About This Manual This TEAC 1x10 DVD Duplicator User’s Manual explains how to operate the TEAC DVD Duplicator. It is divided into the following chapters: Chapter 1: Introduction This chapter describes the shipping package contents and introduces the TEAC DVD...
Page 5 - Table of Contents
Table of Contents TEAC 1x10 DVD Duplicator User’s Manual iii Table of Contents Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iCopyright and Trademark Information . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 7 - List of Figures
TEAC 1x10 DVD Duplicator User’s Manual v List of Figures Figure 1. DVD Duplicator Unit Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Figure 2. Front Panel of the DVD Duplicator Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Figure 3. LCD Control Pan...
Page 9 - Chapter 1. Introduction; Thank you for purchasing a TEAC 1x10 DVD Duplicator.
TEAC 1x10 DVD Duplicator User’s Manual 1 Chapter 1. Introduction Thank you for purchasing a TEAC 1x10 DVD Duplicator. The TEAC 1x10 DVD Duplicator is a stand-alone disc-to-disc DVD Duplicator system that does not require connection to a computer. It can duplicate a single master DVD to DVD media at ...
Page 10 - DVD Duplicator Package Contents; TEAC 1x10 DVD Duplicator unit; please contact your vendor immediately.
DVD Duplicator Package Contents 2 TEAC 1x10 DVD Duplicator User’s Manual DVD Duplicator Package Contents Your TEAC DVD Duplicator package includes the following items (see Figure 1). ❑ TEAC 1x10 DVD Duplicator unit ❑ AC power cable ❑ TEAC 1x10 DVD Duplicator User’s Manual (this manual on CD-ROM) Fig...
Page 11 - Front Panel; Figure 2 illustrates the front panel of the DVD Duplicator unit.; Insert the disc to be copied into the source drive. Use the disc
Front Panel TEAC 1x10 DVD Duplicator User’s Manual 3 Front Panel Figure 2 illustrates the front panel of the DVD Duplicator unit. Figure 2. Front Panel of the DVD Duplicator Unit source drive: Insert the disc to be copied into the source drive. Use the disc tray to load a DVD into the drive. You can...
Page 12 - LED power indicator:; TEAC strongly recommends that you do not push the tray in to close
Front Panel 4 TEAC 1x10 DVD Duplicator User’s Manual LCD control panel: Use the control panel buttons to navigate through the various functions viewed on the LCD display. Figure 3. LCD Control Panel The DVD Duplicator control panel features an LCD display and two buttons. These buttons are described...
Page 13 - Rear Panel; Figure 4 illustrates the rear panel of the DVD Duplicator unit.; Ball-bearing fans cool the DVD Duplicator.; AC IN power connector:; Connect the included AC power cable to this input
Rear Panel TEAC 1x10 DVD Duplicator User’s Manual 5 Rear Panel Figure 4 illustrates the rear panel of the DVD Duplicator unit. Figure 4. Rear Panel of the DVD Duplicator Unit cooling fans: Ball-bearing fans cool the DVD Duplicator. AC voltage selector: Use this switch to select either 115VAC or 220V...
Page 15 - Chapter 2. Using the DVD Duplicator; Setup; For more information, refer to the section “Front Panel” on page 3.; Test; function by default.; event of future storage or transportation of the unit.
Setup TEAC 1x10 DVD Duplicator User’s Manual 7 Chapter 2. Using the DVD Duplicator This chapter explains how to set up the DVD Duplicator, as well as basic operation and menu functions. Setup 1. Select a well-ventilated area for the DVD Duplicator. Carefully remove the DVD Duplicator unit, AC power ...
Page 16 - Basic Operation; This section explains the basic operation of the DVD Duplicator.; Copying from the Optical (DVD) Source Drive; Copy; function by pressing the SET button.
Basic Operation 8 TEAC 1x10 DVD Duplicator User’s Manual Basic Operation This section explains the basic operation of the DVD Duplicator. Copying from the Optical (DVD) Source Drive 1. Place a source disc in the disc tray of the source drive. 2. Switch to the Copy function by pressing the SET button...
Page 17 - Loading Data to and Copying from the Hard Disk Source Drive; Load; The data will be loaded into the default first partition (00000).; The discs will be ejected when the copying process is complete.; Partition Name; function in
Loading Data to and Copying from the Hard Disk Source Drive TEAC 1x10 DVD Duplicator User’s Manual 9 Loading Data to and Copying from the Hard Disk Source Drive During initialization (see Step 4 on page 7), the DVD Duplicator performs a self-test to detect source drives. The DVD-ROM drive and hard d...
Page 19 - Chapter 3. DVD Duplicator Functions; Operation Mode Functions
Operation Mode Functions TEAC 1x10 DVD Duplicator User’s Manual 11 Chapter 3. DVD Duplicator Functions The DVD Duplicator features three (3) modes of operation: ❑ Operation mode ❑ Setup mode ❑ Advanced mode Operation Mode Functions Operation mode includes seven (7) functions. Each function is explai...
Page 20 - Erase
Erase 12 TEAC 1x10 DVD Duplicator User’s Manual Erase The Erase function erases the data from /RW media. The default setting performs a Quick Erase when you press the RUN button. You can also press and hold the RUN button for three (3) seconds to perform a Full Erase . The Full Erase requires more t...
Page 21 - Setup Mode Functions; Automatic; Set as Default; Update Firmware; CD Reading Speed
Setup Mode Functions TEAC 1x10 DVD Duplicator User’s Manual 13 Setup Mode Functions The Setup mode includes nine (9) functions. To enter the Setup mode, press and hold the SET button until you hear a beep. The LCD will then display SETUP. Press the SET button to scroll through the available function...
Page 22 - CD Writing Speed
CD Writing Speed 14 TEAC 1x10 DVD Duplicator User’s Manual CD Writing Speed The CD Writing Speed function controls the speed at which the source drive writes to a CD-R disc. The default setting is MX (maximum) write speed. ❑ RUN: Modify parameter. ❑ SET: Save and quit. DVD Reading Speed The DVD Read...
Page 23 - Advanced Mode Functions; Choose Source
Advanced Mode Functions TEAC 1x10 DVD Duplicator User’s Manual 15 Advanced Mode Functions The Advanced Operation mode includes 17 functions. Each function is explained below. Choose Source The Choose Source function enables you to change the device code of the source drive. The default setting is A ...
Page 24 - CD Writing Way
CD Writing Way 16 TEAC 1x10 DVD Duplicator User’s Manual CD Writing Way The CD Writing Way function enables you to select from the three writing methods for CD-R media. The default setting is DAO . ❑ DAO : Disc at once ❑ TAO : Track at once ❑ RAW : This is only used when the writer supports RAW writ...
Page 25 - Enable Send OPC
Show Exe. Time TEAC 1x10 DVD Duplicator User’s Manual 17 Show Exe. Time The Show Exe Time function enables you to find out how long a function’s execution time takes. The default setting is Disable . ❑ RUN : Enable or disable. ❑ SET : Save or quit. Auto Exe. Time The Auto Exe. Time function enables ...
Page 26 - Partition Size
Partition Size 18 TEAC 1x10 DVD Duplicator User’s Manual Partition Size The Partition Size function enables you to assign different partition sizes to the internal hard disk drive depending on requirements. The default setting is 9GB. Please note that any data that is already present on the partitio...
Page 27 - Appendix A. List of Functions
TEAC 1x10 DVD Duplicator User’s Manual 19 Appendix A. List of Functions Operation Mode Functions ❑ Test ❑ Copy ❑ Compare ❑ Copy and Compare ❑ Verify ❑ Erase ❑ Load Setup Mode Functions ❑ Automatic ❑ Partition Name ❑ Set as Default ❑ Update Firmware ❑ CD Reading Speed ❑ CD Writing Speed ❑ DVD Reading...
Page 28 - Appendix B. LCD Error Code Definitions
20 TEAC 1x10 DVD Duplicator User’s Manual Appendix B. LCD Error Code Definitions Error Code Definition SET_SPEED_ERROR ‘S’ Incorrect speed setting READ_ERROR ‘r’ Reading error WRITE_ERROR ‘w’ Writing error READ_DMA_ERROR ‘R’ DMA reading error WRITE_DMA_ERROR ‘W’ DMA writing error CUE-SHEET_ERROR ‘U’...
Page 29 - Appendix C. About DVD and CD Discs; Handling Discs
TEAC 1x10 DVD Duplicator User’s Manual 21 Appendix C. About DVD and CD Discs This appendix explains how to handle, load, and eject DVD and CD discs. Handling Discs ❑ Handle compact discs only by their edges to avoid getting fingerprints on the surface. Do not touch the disc’s data surface (unlabeled...
Page 30 - Loading and Ejecting Discs
Loading and Ejecting Discs 22 TEAC 1x10 DVD Duplicator User’s Manual Loading and Ejecting Discs To load a disc into the source or a target drive, first open the disc tray by pressing the Eject button on the front of the drive. Place the disc on the disc tray with its label side facing up. Then press...
Page 31 - Appendix D. Specifications
Loading and Ejecting Discs TEAC 1x10 DVD Duplicator User’s Manual 23 Appendix D. Specifications The following table lists the product specifications for the TEAC DVD Duplicator. Model DVW-D110H HDD Capacity 160GB Weight 50 lbs. Dimensions (HxWxD) 25" x 7.5" x 16.5" DVD Recorders TEAC 16X...
Page 32 - Appendix E. Technical Support and Warranty; Limited Warranty
Limited Warranty 24 TEAC 1x10 DVD Duplicator User’s Manual Appendix E. Technical Support and Warranty For technical support, please contact the TEAC America Support Center TEAC America, Inc. (USA)Technical SupportTelephone: (323) 727-4860 • Fax: (323) 869-8751Monday - Friday 8:00 a.m. - 5:00 pm PSTh...
