TDK FReta Series - Manual
TDK FReta Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Recommended Hole Pattern:; FUNCTION
- Page 7 – Electrical Characteristics:
- Page 10 – Dimensions are; The thermal performance data; AIRFLOW
- Page 11 – ) and airflow rate as shown in the; Operating Information:; The power
- Page 12 – TDK Innoveta power
- Page 13 – is a trademark or registered trademark of TDK Corporation.
Data Sheet: FReta iEB Series –Single Output Eighth Brick Bus Converter
©2004-2006 TDK Innoveta Inc.
1/24/2008
℡
(877) 498-0099
1/13
The FReta Series offers an
industry
standard 150W Eighth brick
power module
featuring a
high operating efficiency
that
results in true useable power. The FReta
modules offer a fixed conversion ratio of
either 4:1 or 5:1.
Standard Features:
•
Size – 58.4mm x 22.9 mm x 8.5
mm (2.30 in. x 0.90 in. x 0.34 in.)
•
Thru-hole pins 3.68 mm (0.145”)
•
High efficiency – greater than 94%
•
2250Vdc isolation voltage
•
Meets basic insulation spacing
requirements
•
Constant switching frequency
•
Industry Standard Footprint
•
Remote on/off (positive logic)
•
Auto-recovering input over-voltage
protection
•
Auto-recovering output over-
current protection
•
Auto-recovering output short circuit
protection
•
Auto-recovering over-temperature
protection
•
Applying for UL 60950 (U.S. and
Canada), VDE 0805, CB scheme
(IEC950), CE Mark (EN60950)
•
ISO Certified manufacturing
facilities
Optional Features:
•
Remote on/off (negative logic)
•
Short Thru-hole pins 2.79 mm
(0.110”)
•
Long Thru-hole pins 5.08 mm
(0.200”)
•
Increased operating input voltage
range
FReta iEB Series DC/DC Power Modules
48V Input, 17A Output
Eighth Brick
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Data Sheet: FReta iEB Series –Single Output Eighth Brick Bus Converter ©2004-2006 TDK Innoveta Inc. 1/24/2008 ℡ (877) 498-0099 3/13 Mechanical Specification: Dimensions are in mm [in]. Unless otherwise specified tolerances are: x.x ± 0.5 [0.02], x.xx and x.xxx ± 0.25 [0.010]. Recommended Hole Patter...
Data Sheet: FReta iEB Series –Single Output Eighth Brick Bus Converter ©2004-2006 TDK Innoveta Inc. 1/24/2008 ℡ (877) 498-0099 7/13 Electrical Characteristics: iEB48013A120V-000 through -005: 12V, 13.5A Output iEB48013A120V-000 Typical Efficiency vs. Input Voltage at Ta=25 degrees. iEB48013A120V-000...
Data Sheet: FReta iEB Series –Single Output Eighth Brick Bus Converter ©2004-2006 TDK Innoveta Inc. 1/24/2008 ℡ (877) 498-0099 10/13 Wind Tunnel Test Setup Figure Dimensions are in millimeters and (inches). Thermal Management: An important part of the overall system design process is thermal managem...