Taylor C122 - Manual - manualsarea.com

Page 3 - IMPORTANT

ENGLISH - 2 The machine is covered by guarantee according to the conditions reported in the Seller’s In the following field, please write your machine serial number in capital letters Serial number Distributor’s stamp IMPORTANT We recommend to carefully and fully read the present manual before using...

Page 4 - TAYLOR; INDEX; TRANSPORT, HANDLING AND STORAGE.......................................

3 - ENGLISH Congratulations on purchasing a machine TAYLOR . The present manual, enclosed to the machine, is integrant and essential part of themachine and shall be delivered to the final user. Before performing any kind of operation, itis recommended to carefully study the reported instructions, as...

Page 6 - MARKINGS AND GRAPHICS; Machine data plate

5 - ENGLISH 2. MARKINGS AND GRAPHICS Never touch the machine with hands and tools during production or maintenance andcleaning operations, without making sure that the machine is in STOP position, the masterswitch is off and/or the multipolar plug disconnected.TAYLOR declines any liability for accid...

Page 8 - FIELD OF USE; rod

7 - ENGLISH 3. FIELD OF USE 3.1 FIELD OF USE The batch freezers TAYLOR are espressly designed and engineered for ice-cream batchfreezing cycles. 3.2 LIMITS OF USE Never use the machine with variable supply voltage and/or more than +/- 10% of the valueshowed in the nameplate or when the feeder is dam...

Page 10 - It allows selecting the working programs.; Consistency selector; Consistency selector with two positions

9 - ENGLISH 5. OPERATION 5.1 CONTROLS 1. Door It hermetically seals the cylinder during theworking cycles. It can be easily removed forcleaning purpose. 2. Safety grid – hopper cover It allows the operator to charge the productunder safe conditions. The cover preventsthe batch to get in contact with...

Page 11 - , it is possible to decrease the consistency on “low consistency”,

ENGLISH - 10 5.2 CONTROL PANEL C119 1. STOP Whatever working cycle is in progress, it stops the machine and cancels any function inprogress. 2. DELIVERY By pressing the DELIVERY pushbutton, only the agitator motor keeps on running. Thedoor safety catch is enabled and the agitator motor stops running...

Page 12 - - Lift the hopper cover and pour the mixture into; MIN; - Press the PRODUCTION pushbutton to start up

11 - ENGLISH 5.3 ICE-CREAM PRODUCTION After the machine has been installed according to theinstructions reported in chapter 3 and carefullycleaned and sanitized according to the instructionsreported in chapter 6, proceed as follows to start upthe ice-cream production:- Check that the master switch i...

Page 16 - MAINTENANCE OF AGITATOR AND GASKETS

15 - ENGLISH 6.1.2 MAINTENANCE OF AGITATOR AND GASKETS The agitator blades are equipped with scraping pads made of atoxic plastic materialssuitable for food industry. These components are subject to wear according to thecharacteristics of the employed mixture: with high sugar content and low fat per...

TAYLOR COMPANY, 750 North Blackhawk Boulevard, Rockton, IL 61072 Telephone: (815) 624-8333 Telex: 6871502 TAYLO Fax: (815) 624-8000 www.taylor-company.com December, 2004 Taylor All rights reserved cod. M04.37531

Taylor C122 - Manual

Table of Contents:

Summary

Other Taylor Models