Tascam IF-FW/DM - Manual

Tascam IF-FW/DM

Tascam IF-FW/DM – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
Page: / 12

Table of Contents:

  • Page 2 – Table of contents; Owner ’s Manual and familiarize yourself; Introduction
  • Page 3 – Features; Macintosh; Pentium® compatible processor 1.5 GHz; System Requirements; Trademarks
  • Page 4 – Installation; back plate is flush with the mixer’s back; Please confirm your card’s configuration; Configure For Your Mixer
  • Page 5 – you plan to drive the mixer’s automa; Making Connections
  • Page 6 – order for Windows to recognize the IF-FW/; Continue Anyway; Windows
  • Page 7 – Setup; SONAR; C o n f i g u r e t h e B u ff e r S i z e a n d H o s t; Digital Performer
  • Page 8 – Mixer Outputs; ROUTING; System Clocking; Master Clock
  • Page 9 – The IF-FW/DM’s mixer inputs must be; Routing; tabs of the mixer’s; Mixer Inputs
  • Page 10 – Use this slider to control the size of the
  • Page 11 – Enable WDM
  • Page 12 – TEAC CORPORATION
Loading the manual

»

D00830000B

OWNER'S MANUAL

IF-FW/DM

FireWire Interface Card

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Table of contents; Owner ’s Manual and familiarize yourself; Introduction

TASCAM IF-FW/DM Owner's Manual SETUP ........................................ 7 IF-FW/DM Interface Setup ............... 7 CUBASE / NUENDO ..................... 7 SONAR .......................................... 7 LOGIC ........................................... 7 DIGITAL PERFORMER ...................

Page 3 - Features; Macintosh; Pentium® compatible processor 1.5 GHz; System Requirements; Trademarks

O TASCAM IF-FW/DM Owner's Manual Introduction The IF-FW/DM provides the following inter- facing between your TASCAM mixer and a host computer via FireWire:• 24 channels of Input to the mixer from the computer at 44.1k and 48k sample rates • 24 channels of Output from the mixer to the computer at 44....

Page 4 - Installation; back plate is flush with the mixer’s back; Please confirm your card’s configuration; Configure For Your Mixer

TASCAM IF-FW/DM Owner's Manual O Installation Installing the IF-FW/DM 1. Remove the five screws holding the blank plate or card currently installed in Slot 1 then remove the plate or card. 2. Insert the IF-FW/DM into Slot 1, mak- ing sure that the card edges slide into the white plastic guide inside...

Other Tascam Models

All Tascam Other