Page 2 - TO THE USER; CAUTION; Important Safety Precautions; CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE; WARNING: TO PREVENT FIRE OR SHOCK
2 TASCAM DP-01 Owner’s Manual TO THE USER This equipment has been tested and found tocomply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protectionagainst harmful interference in a residentialinstallation. This equi...
Page 3 - Important Safety Instructions
TASCAM DP-01 Owner’s Manual 3 Important Safety Instructions 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install inaccordance with th...
Page 4 - Safety Information
4 TASCAM DP-01 Owner’s Manual Safety Information This product has been designed and manufacturedaccording to FDA regulations "title 21, CFR, chapter1, subchapter J, based on the Radiation Control forHealth and Safety Act of 1968", and is classified as aclass 1 laser product. There is no haza...
Page 5 - Contents; : Advanced techniques
Contents TASCAM DP-01 Owner’s Manual 5 1 : Starting out with your DP-01 Getting started This manual ........................................................................................................................9Copyright ........................................................................
Page 7 - Media Compatibility Table
Contents TASCAM DP-01 Owner’s Manual 7 4 : DP-01FX/CD Appendix About CD-R and CD-RW discs Handling of compact discs ..............................................................................................69 Media Compatibility Table Opening/Closing CDs ............................................
Page 8 - Table of Figures
Table of Figures 8 TASCAM DP-01 Owner’s Manual Figure 1.1: Power connections to the DP-01 ..........................................................11Figure 1.2: SHUT DOWN and ACCESS ...................................................................12Figure 1.3: Menu controls .........................
Page 9 - Getting; Getting started; This manual; and; AUX IN; Troubleshooting; The DP01 was designed to be easy to use, but some
TASCAM DP-01 Owner’s Manual 9 Getting st arted 1 : Starting out with your DP-01 Getting started Read this section first. It contains important basic information about using your DP01 effectively, and will help you create exciting original musical projects. When you have read this section (“Starting ...
Page 10 - Copyright; Macintosh, MacOS, and MacOS X are trademarks of Apple Computer.; What’s in the box; adaptor and cable with any other product.
Getting started 10 TASCAM DP-01 Owner’s Manual S ta rting out with your DP-01 Copyright Windows, Windows XP, and Windows 2000 are trademarks of Microsoft Corporation. Macintosh, MacOS, and MacOS X are trademarks of Apple Computer. DP-01 Line-up There are three models of the DP01: the DP01, DP01FX, a...
Page 11 - Starting out with your DP-01; do; Starting up the DP-01
Starting out with your DP-01 TASCAM DP-01 Owner’s Manual 11 S tartup & shut do wn Startup & shutdown Read this section to understand how to power up and power downthe DP-01. When switching theDP-01 on and off, we suggest that you turn down thevolume of any speakers or amplifi-ers connected t...
Page 12 - Shutting down the DP-01; The ACCESS light; How to play back demo songs
Startup & shutdown 12 TASCAM DP-01 Owner’s Manual S ta rting out with your DP-01 Shutting down the DP-01 If you don’t shutdown the DP-01 in the way described here, you maylose your recordings and settings.Always shut down the DP-01according to these instructions. 1 First, stop playback or record...
Page 14 - Navigation
Navigation 14 TASCAM DP-01 Owner’s Manual S ta rting out with your DP-01 Navigation The DP-01 uses a menu system which allows you to make settings,and perform many operations. This section explains how to use themenu system and to check and make settings. Press the MENU key to bring up the opening m...
Page 15 - Nav; The SHIFT key; The; Titling; When you see a screen like the one below:
Starting out with your DP-01 TASCAM DP-01 Owner’s Manual 15 Nav igation Use the jog wheel (or the and keys) to move the cursor to select the song to be erased, and then press the ENTER key. In cases like this, where the DP-01 asks you a question, the ENTER key now becomes a YES key, and the EXIT key...
Page 16 - Connecting your DP-01 to other equipment
Connecting your DP-01 to other equipment 16 TASCAM DP-01 Owner’s Manual S ta rting out with your DP-01 Connecting your DP-01 to other equipment Figure 1.4 shows aDP-01FX model. The appearance of the DP-01 andDP-01FX/CD differs slightly, but theprinciples are the same. Before you start recording with...
Page 17 - Conn; Microphones
Starting out with your DP-01 TASCAM DP-01 Owner’s Manual 17 Conn ecting y our DP-0 1 to othe r e quipmen t The DP-01FX andDP-01FX/CD include phantom-powered XLRmicrophone input connectors. See“DP-01FX Appendix” on page 62for details of using these connec-tors. Microphones are connected to the front ...
Page 18 - The INPUT MODE switch; Monitoring and recording
Connecting your DP-01 to other equipment 18 TASCAM DP-01 Owner’s Manual S ta rting out with your DP-01 The INPUT MODE switch You will use this switch when you are recording from input A andinput B at the same time. INPUT MODE does not affect the recording at all—just the monitoringprocess. This fron...
Page 19 - External stereo input; jacks on the rear panel marked; This stereo signal is routed to the analog; Digital output; Use a standard optical digital cable to connect this (rear; signals are not output through the digital; MIDI output
Starting out with your DP-01 TASCAM DP-01 Owner’s Manual 19 Conn ecting y our DP-0 1 to othe r e quipmen t External stereo input The DP01 has two 1/4" mono unbalanced jacks on the rear panel marked STEREO MIX . These can be used to connect an external stereo submixer, synthesizer, drum machine, ...
Page 20 - Managing your songs; Creating a new song; Storing songs
Managing your songs 20 TASCAM DP-01 Owner’s Manual S ta rting out with your DP-01 Managing your songs Any recording madeon the DP-01 is referred to as a "song", even thoughit may only consist of instrumentaltracks or spoken word. This section shows you how to create a new song, as well as ba...
Page 21 - Manag; Reverting to last version; Loading a saved song
Starting out with your DP-01 TASCAM DP-01 Owner’s Manual 21 Manag ing your so ngs Reverting to last version The REVERT action (which follows the SAVE action in the SONG menu) allows you to undo all changes since the last save. When you select the REVERT action, the title of the song is shown. Press ...
Page 22 - Erasing many songs at one time; You may want to select a number of songs for erasing.; Song information; Additional song operations
Managing your songs 22 TASCAM DP-01 Owner’s Manual S ta rting out with your DP-01 Erasing many songs at one time You may want to select a number of songs for erasing. You can also usethis method to per- form other operations, such ascopying. Use the jog wheel to scroll up and down through the list o...
Page 23 - Ass; Assigning inputs; Clearing an assignment
Starting out with your DP-01 TASCAM DP-01 Owner’s Manual 23 Ass igning in put s Assigning inputs When we talk about “assigning” inputs, we are talking about routingthe signals from the two inputs to the tracks. You can record on up to two tracks at a time. This means that thesame input can be assign...
Page 24 - Recording; safe
Recording 24 TASCAM DP-01 Owner’s Manual S ta rting out with your DP-01 Recording The DP-01FX andDP-01FX/CD con- tain internal input effects proces-sors ( MULTI ). See “DP-01FX Appendix” on page 62 for details. When you’ve connected a source, and assigned the inputs to tracks,you’re ready to start r...
Page 25 - Recor; The DP01 provides three ways to perform punching:; When at least one track is armed (the; See the full explanation of how to use the
Starting out with your DP-01 TASCAM DP-01 Owner’s Manual 25 Recor d ing More advanced features The DP-01 has many advanced features which you may want to uselater on. Though we don't want to go into all of them now, you shouldbe aware of a few of them now. Using marks to locate positions Although “R...
Page 26 - Mixdown and mastering; Mixdown; This is the art of mixing the different tracks you have recorded
Mixdown and mastering 26 TASCAM DP-01 Owner’s Manual S ta rting out with your DP-01 Mixdown and mastering This is the last stage in creating a song, allowing you to create a filewhich you can play back into a stereo recorder, and export to a WAVfile for further processing, archiving, recording, etc....
Page 27 - Mixdown and; Mastering; The mixed stereo master is stored on disk as part of the song.
Starting out with your DP-01 TASCAM DP-01 Owner’s Manual 27 Mixdown and mastering Mastering This is where the actual stereo recording takes place, once you’rehappy with the mix you’ve created. You create a mixed master ste-reo track, starting at 00:00:00:00 (the “zero point”) and continuing tothe OU...
Page 28 - Advanc; Location; Direct location
28 TASCAM DP-01 Owner’s Manual Advanc ed techn iques 2 : Advanced techniques The operations described here are ones that you may use less oftenthan the ones described earlier in this manual, but you will find use-ful in your work with the DP-01. Location This section tells you how to jump around to ...
Page 29 - Advanced techniques; ocation; To move to a location mark; If you made a mistake when you entered a; IN and OUT marks
Advanced techniques TASCAM DP-01 Owner’s Manual 29 L ocation To move to a location mark Press and hold the LOCATE key, and briefly press and release the REW or F FWD key to move to the previous or next mark in the song. This works while playing back, whilestopped or “winding”, but not while recordin...
Page 30 - Using the meters; Input meters; You can change the way the meters are displayed.; Press; , and then select the; option allows you to use the jog wheel to pick from four
Using the meters 30 TASCAM DP-01 Owner’s Manual Advanc ed techn iques Using the meters Meters to let you know what’s going on with the audio in the DP-01.Here are a few little hints and tips which may help you. As well as showing you the level of signals, the meters can show you if the signals are a...
Page 31 - EQ settings; Source; Low
Advanced techniques TASCAM DP-01 Owner’s Manual 31 EQ settings EQ settings This can help youemphasize the par- ticular frequency ranges on a track. On the DP-01, you can set the frequency at which the EQ HIGH andEQ LOW controls work; individually for each channel. 1 Press MENU , and then select the ...
Page 32 - Punching; Rehearsal; IN point; Recorded signals are cut; PLAY; indicator goes
Punching 32 TASCAM DP-01 Owner’s Manual Advanc ed techn iques Punching As mentioned in “Punch recording” on page 25, the DP-01 providestwo manual ways of changing between playback and recordingmodes: using the PLAY and RECORD keys, and using the foot switch. There is also an automated punch mode, de...
Page 33 - Pun; Punch recording; When you have rehearsed your punch-in, you can start recording.
Advanced techniques TASCAM DP-01 Owner’s Manual 33 Pun ching Punch recording When you have rehearsed your punch-in, you can start recording. 1 Press the RHSL key so that the indicator goes out (but the AUTO PUNCH indicator is still lit). 2 Press PLAY so that playback starts. Use the pre-roll time to...
Page 34 - Bouncing; fader to a pair of unused tracks.; BO U N CE
Bouncing 34 TASCAM DP-01 Owner’s Manual Advanc ed techn iques Bouncing You can bounce toone track, if you want, but you will probably want tobounce in stereo. “Bouncing” on the DP-01 refers to the technique of mixing recordedtracks through the MASTER fader to a pair of unused tracks. You might use a...
Page 35 - Rep; Repeat; Setting the repeat interval; You can set the time between repeats up to 9.9 seconds.
Advanced techniques TASCAM DP-01 Owner’s Manual 35 Rep eat Repeat Repeat allows you to repeat the playback or auto-punched rehearsal(see “Rehearsal” on page 32) between the IN and OUT points. You can’t set thesepoints when the REPEAT key is lit. First, set the IN and OUT points at the place where yo...
Page 36 - Working in bars & beats; Tempo setting; Selecting the time mode
Working in bars & beats 36 TASCAM DP-01 Owner’s Manual Advanc ed techn iques Working in bars & beats “Bars” are alsosometimes ref- erred to as “measures”. Besides working in minutes and seconds (as explained in detail in“Direct location” on page 28), the DP-01 can work in musical barsand bea...
Page 37 - rking in; Point editing; Mode; Select from; IntLvl; Set the output level of the metronome within the range 0 to 127.
Advanced techniques TASCAM DP-01 Owner’s Manual 37 W o rking in bars & beat s Point editing Even when the screen shows positions in bars and beats, location points are edited in minutes and seconds (“To edit a locationmark” on page 29), except that the bars and beats equivalent is alsoshown. Whe...
Page 38 - Working with MIDI; and scroll down to; and press the
Working in bars & beats 38 TASCAM DP-01 Owner’s Manual Advanc ed techn iques You can select MIDI channel, note/note on velocity of a regular click, and note/note on velocity of an accent. Scroll the list to set the following parameters: Mode Select from RecOnly (only at recording) and Rec&Pl...
Page 39 - MIDI timecode; The metronome function is
Advanced techniques TASCAM DP-01 Owner’s Manual 39 W o rking in bars & beat s 2 Select the GENERATOR action and press the key: 3 Use the jog wheel to change the OFF setting to CLK (clock). The DP-01 now sends the messages described here from MIDI OUT when playing back or recording. Connect the M...
Page 40 - Disk management; Selecting the active partition; Formatting a disk
Disk management 40 TASCAM DP-01 Owner’s Manual Advanc ed techn iques Disk management Formatting and re-partitioning are “destructive” actions. You cannotundo them, and the changes arepermanent. The DP-01 allows you format and re-partition the internal hard diskto suit your needs. The DP01’s hard dis...
Page 41 - Dis; Formatting the FAT partition; Automatic song creation
Advanced techniques TASCAM DP-01 Owner’s Manual 41 Dis k mana gement 4 Press ENTER . It is most importantthat the power to the DP-01 is not turned off whenthe disk is being formatted. If thishappens, the unit may becomeunusable. A message reminds you that all songs will be lost. 5 Press ENTER again ...
Page 42 - Advanced song management; Copying songs; This function allows you to copy a song to another partition.; Deleting unused data; You can delete the unused data from the currentlyloaded song.
Advanced song management 42 TASCAM DP-01 Owner’s Manual Advanc ed techn iques Advanced song management Copying songs The DP-01 disk is divided into “partitions” (see “Disk management”on page 40). You can use different partitions for different purposes:old songs/new songs, or instrumentals/vocal numb...
Page 43 - Adv; Protecting a song
Advanced techniques TASCAM DP-01 Owner’s Manual 43 Adv anced s ong man agemen t Protecting a song When a song is protected, it cannot be edited, and further recordingis not possible. Of course, it cannot be erased, either. 1 From the SONG menu, select the PROTECT action: 2 Use the wheel to change pr...
Page 44 - Using the USB connection; System requirements; With
Using the USB connection 44 TASCAM DP-01 Owner’s Manual Advanc ed techn iques Using the USB connection We use the term“PC” throughout this section to mean either a Win-dows or Macintosh personal com-puter. You can use a personal computer to read and write from the FATpartition of the hard disk. Data...
Page 45 - Usi; Disconnecting from a Macintosh system; When you are discon; “Open” and “Close”; Backing up and restoring songs
Advanced techniques TASCAM DP-01 Owner’s Manual 45 Usi ng the USB conne ction 3 You can now unplug the USB cable. If a panel telling you it is not safe to remove the DP-01 appears, do not“close” or unplug the DP-01. Close all programs and windows that areaccessing the files on the DP-01 and try agai...
Page 46 - Restoring a song
Using the USB connection 46 TASCAM DP-01 Owner’s Manual Advanc ed techn iques 3 Use the jog wheel to move the selection cursor ( ) to the song to bebacked up. Press ENTER . If you do not haveenough space on the FAT partition to back up a song,you must connect the DP-01 to aPC and manage the files fr...
Page 47 - Importing and exporting tracks; Exporting tracks
Advanced techniques TASCAM DP-01 Owner’s Manual 47 Usi ng the USB conne ction Importing and exporting tracks You can import and export individual tracks to and from a PC via theFAT partition. The files used for track import and export are 16-bit44.1 kHz mono WAV format (and must have the .WAV extens...
Page 49 - Exporting the mastered stereo tracks
Advanced techniques TASCAM DP-01 Owner’s Manual 49 Usi ng the USB conne ction Exporting the mastered stereo tracks When you have finished mastering (see “Mastering” on page 27),you may want to save the mastered stereo mix, otherwise it will beoverwritten when you next perform a mastering operation. ...
Page 50 - About track editing; ing; Using edit mode; Press the; to perform the operation, or; to exit without performing
About track editing 50 TASCAM DP-01 Owner’s Manual Advanc ed techn iques About track editing One of the most useful features of a disk-based recorder such asthe DP-01 is the ability to edit material easily. When working with astereo tape recorder in the past, editing was not an easy process,and was ...
Page 51 - Abou; Track editing functions; You can change the following values:; Times
Advanced techniques TASCAM DP-01 Owner’s Manual 51 Abou t tra ck edi ting Track editing functions The track editing functions available on the DP01 are: • COPY->PASTE• COPY->INSERT• MOVE->PASTE• MOVE->INSERT• OPEN• CUT• SILENCE• CLONE TRACK• CLEAN OUT COPY -> PASTE This function takes...
Page 53 - OPEN; There is only one value that you can change:; SILENCE; There is only one value that you can change:
Advanced techniques TASCAM DP-01 Owner’s Manual 53 Abou t tra ck edi ting You can change the following values: Src. Trk This sets the source track or tracks from which the section is taken. Choose 1 through 8 to select an individual track. Choose 1/2 , 3/4 , 5/6 , 7/8 to select a pair of tracks. Cho...
Page 54 - CLONE TRACK; CLEAN OUT; or; track
About track editing 54 TASCAM DP-01 Owner’s Manual Advanc ed techn iques CLONE TRACK This copies a track or pair of tracks to another track or pair of tracks.There are no IN and OUT points when cloning. There are two values that you can change: Src. Trk Select an individual track ( 1 through 8 ), a ...
Page 55 - Redoing an action; If you make a mistake undoing an action, you can
Advanced techniques TASCAM DP-01 Owner’s Manual 55 Abou t tra ck edi ting The top line is the most recent event. When you undo an action (or event), you undo the action pointed toby the cursor ( ) and all actions after it. You can’t undo just one actionin the middle of the event history list. Use th...
Page 56 - Why can’t I hear any sound when I play back?
Troubleshooting 56 TASCAM DP-01 Owner’s Manual Advanc ed techn iques Troubleshooting When working with any new piece of equipment like the DP-01, it’ssometimes difficult to work out why something isn’t happening theway you expect. The main thing is to take your time—after all, you’renot paying hourl...
Page 57 - ubleshoo; Messages; key by mistake, or you
Advanced techniques TASCAM DP-01 Owner’s Manual 57 T ro ubleshoo ting The volume of a multi-effect may need adjusting or the parameter isset so low that the effect is too subtle to be noticed (“Multi-effect” onpage 64). Messages The following popup messages alert you to conditions that mayarise whil...
Page 58 - key which cannot be used until you press; You can’t clone a track to itself. “CLONE TRACK” on page 54
Troubleshooting 58 TASCAM DP-01 Owner’s Manual Advanc ed techn iques Not Stopped The transport is moving (not stopped, but playing back, recording, etc.) and you’ve pressed a key such as the BOUNCE key which cannot be used until you press STOP . Now Recording You’re trying to perform an action which...
Page 59 - ecifica; Specifications
Advanced techniques TASCAM DP-01 Owner’s Manual 59 S p ecifica tions Specifications Analog specifications Digital specifications Audio performance INPUTs (A and B) 1/4" phone (unbalanced) XLR balanced (DP-01FX and DP-01FX/CD) Input impedance > 10k Ω (max), or 1 M Ω ( A only) with switch in GU...
Page 60 - Physical characteristics
Specifications 60 TASCAM DP-01 Owner’s Manual Advanc ed techn iques Physical characteristics Dimensional drawings External power adapter AC input 100 — 240 V AC, 50/60 Hz External power adapter output 12 V External power adapter output current 2.5 A Power consumption DP-01/DP-01FX: 15W, DP-01FX/CD: ...
Page 62 - X App; Balanced XLR inputs; Phantom power; switch can be turned; to supply +48V phantom; Input level controls; Tuning a guitar; key and the
62 TASCAM DP-01 Owner’s Manual DP-01F X App endix 3 : DP-01FX Appendix The DP-01FX differs from the DP-01 in a few important respects: itprovides balanced XLR connectors with switchable phantom powerfor connecting condenser microphones, there is a built-in guitar/basstuner, it provides a multi-proce...
Page 63 - unin; Changing the tuning
DP-01FX Appendix TASCAM DP-01 Owner’s Manual 63 T unin g a guit a r The line of symbols on either side of the center square gets shorter asthe played note approaches the “target” and the center square fillswhen the string is in tune: Changing the tuning Most instruments are tuned to A=440 Hz. If you...
Page 64 - Assigning the effect
Multi-effect 64 TASCAM DP-01 Owner’s Manual DP-01F X App endix Multi-effect The DP-01FX contains an input effector, which contains differenttypes of effects, grouped by the type of input (electric guitar, acousticguitar, vocals, etc.) that they are suitable for. Assigning the effect Although there a...
Page 65 - ct; Setting the effect volume; Set the volume of the effect from 0 to 127 by pressing the; key; Available multi-effect settings; This list is divided into the available effect types:; Electric guitar settings
DP-01FX Appendix TASCAM DP-01 Owner’s Manual 65 Multi-effe ct Setting the effect volume Set the volume of the effect from 0 to 127 by pressing the SHIFT key and turning the PARAMETER control. Available multi-effect settings This list is divided into the available effect types: Electric guitar settin...
Page 66 - Acoustic guitar settings
Multi-effect 66 TASCAM DP-01 Owner’s Manual DP-01F X App endix Acoustic guitar settings ( AGTR ) Swingy Mid-peaking warm sound FatJazz1 Use on jazz pieces with breaks FatJazz2 Compressed “fat” jazz setting R&B High emphasis with a rough sound ClnVerb Clear long sustained sound CtyBlues Fat-sound...
Page 67 - Bass guitar settings; ) These sound best with bass instruments; Vocal settings
DP-01FX Appendix TASCAM DP-01 Owner’s Manual 67 Multi-effe ct Bass guitar settings ( BASS ) These sound best with bass instruments — other sources may not give such a good effect. Vocal settings ( VOCAL ) Drum settings ( DRUM ) These sound good with rhythm machines, etc. Arpeggio Acoustic picked arp...
Page 68 - Reverb; Turning the reverb on and off; Setting the reverb time
Reverb 68 TASCAM DP-01 Owner’s Manual DP-01F X App endix Reverb “Reverb” is short for“reverberation”— the sound produced by many shortechoes off the walls of rooms, etc. The reverb effect is available as an alternative to the external SEND/RETURN loop with an external effect processor (see “Effect p...
Page 69 - Handling of compact discs
TASCAM DP-01 Owner’s Manual 69 Abou t CD-R an d CD-R W discs 4 : DP-01FX/CD Appendix About CD-R and CD-RW discs The DP-01FX/CD can use CD-R and CD-RWmedia, including CD-R and CD-RW DigitalAudio media. CDR discs can be recorded once only. Once they have been used for recording, they cannot be erased ...
Page 70 - endix
Media Compatibility Table 70 TASCAM DP-01 Owner’s Manual DP-0 1FX/CD App endix Media Compatibility Table A: Compatible; B: Operation not assured; N: Not compatible Playback of Audio CDs Writing of Audio CDs Data Backup Data Export Data Restore Data Import 12cm CDDA standard formatMade on this CD-R/C...
Page 71 - Audi; • The CD can be opened or closed with the hard disk and CD stopped.; Audio CD Menu; Playing back audio CDs
DP-01FX/CD Appendix TASCAM DP-01 Owner’s Manual 71 Audi o CD Menu In the menu instruc-tions below, select menus by pressing ENTER or the cursor key. The DP-01FX/CD is a DP-01FX with a built-in CD-R/RW drive. Thisappendix describes CD-R/RW functions. Opening/Closing CDs • The CD can be opened or clos...
Page 72 - Plays back the selected track.; Making an audio CD; Writing by Disk At Once; A silent gap of any desired length can also be added between tracks.; key to display the
Audio CD Menu 72 TASCAM DP-01 Owner’s Manual DP-0 1FX/CD App endix 5 When the CD PLAYER menu is displayed, the CD player can be con-trolled using the following keys: - STOP key: Stops the CD player. - PLAY key: Plays back the selected track. - F FWD key: Selects the next track. - REW key: Selects th...
Page 74 - Writing by Track at Once
Audio CD Menu 74 TASCAM DP-01 Owner’s Manual DP-0 1FX/CD App endix 8 After writing to the CD ends, the unit allows you to make anothercopy of the same disc. To write to another CD, press the ENTER key. To cancel writing to another CD, press EXIT key. Writing by Track at Once With Track at Once, a si...
Page 75 - Finalizing CDs; To erase a CD-RW disc so that you can reuse it:
DP-01FX/CD Appendix TASCAM DP-01 Owner’s Manual 75 Audi o CD Menu Finalizing CDs If you are finished recording to a CD in TAO, you need to finalize theCD so that it can be played on a regular CD player. 1 Press the MENU key and choose the AUDIO CD menu. 2 Select FINALIZE from the AUDIO CD menu. 3 Pr...
Page 76 - Data CD Menu
Data CD Menu 76 TASCAM DP-01 Owner’s Manual DP-0 1FX/CD App endix Data CD Menu Importing and exporting tracks Between a CD and the DP-01's song tracks, you can import andexport individual tracks to and from. The files used for track importand export are 16-bit 44.1kHz mono WAV format (and must have ...
Page 77 - Dat; Exporting to CDs; To edit a track name:
DP-01FX/CD Appendix TASCAM DP-01 Owner’s Manual 77 Dat a CD Menu Exporting to CDs You can convert a track to WAV format files and write them to CDsfor editing in a computer. To do this: 1 Insert a CD-R that has not been written or an erased CD-RW into theCD tray and close the tray. 2 Press the MENU ...
Page 78 - Back up your songs to a data CD so that you can restore them later.
Data CD Menu 78 TASCAM DP-01 Owner’s Manual DP-0 1FX/CD App endix 7 Press the ENTER key. The following confirmation screen is displayed. Press the ENTER key to begin exporting to CD. 8 After exporting ends, the display prompts to ask if you want anothercopy: To export to another CD, press the ENTER ...
Page 79 - Restoring songs from a CD
DP-01FX/CD Appendix TASCAM DP-01 Owner’s Manual 79 Dat a CD Menu 8 Press the ENTER key. The following confirmation screen is displayed. Press the ENTER key again. The songs are saved, and the number of CDs required for the backup is displayed. When you have prepared the required number of CDs, press...
Page 80 - Erasing data CDs; To erase a CD-RW so that it can be reused:
Data CD Menu 80 TASCAM DP-01 Owner’s Manual DP-0 1FX/CD App endix 5 Press the ENTER key. The following confirmation screen is displayed. Press the ENTER key again. The song will be restored from CD. 6 If the song is backed up to two or more CDs, a message promptingyou to insert the second backup CD ...
Page 81 - CD-related Error Messages
DP-01FX/CD Appendix TASCAM DP-01 Owner’s Manual 81 Dat a CD Menu CD-related Error Messages If you experience a problem while reading or writing a CD, you maysee one of the following error messages: When a popup message is displayed, press EXIT key to clear the display, check the state of the media, ...
Page 83 - Messa
DP-01FX/CD Appendix TASCAM DP-01 Owner’s Manual 83 Messa ges Import File Too Big "The import file is too big." The size of the file to import equals or exceeds the free space on hard disk when executing an import in the CD IMPORT menu. Create more free space on hard disk by DEL/UNUSED, for e...
Page 87 - Commonly-used functions
Commonly-used functions TASCAM DP-01 Owner’s Manual 87 How do I. .? Show the song name From the home screen, press and hold EXIT “Song information” on page 22 Synchronize another device using MIDITimecode or MIDI clock MENU MIDI GENERATOR See “Working with MIDI” on page 38. Trim the IN and OUT and T...
Page 88 - TEAC CORPORATION
TEAC CORPORATION Phone: +81-422-52-5082 www.tascam.com 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan TEAC AMERICA, INC. Phone: +1-323-726-0303 www.tascam.com 7733 Telegraph Road, Montebello, California 90640 TEAC CANADA LTD. Phone: +1905-890-8008 Facsimile: +1905-890-9888 www.tascam.com 5939 ...