Tanaka TBC-340/D - Manual

Tanaka TBC-340/D

Tanaka TBC-340/D – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
Page: / 21

Table of Contents:

  • Page 2 – www.tanaka-usa.com 1 [email protected]; Owner’s Manual; Before using this unit:; Read the operator’s manual carefully.; WARNING; The engine exhaust from this product; stop the engine and cutting
  • Page 4 – instructions that apply to your unit.
  • Page 6 – Assembly procedures
  • Page 7 – Cover throttle wire and stop cords together with protective tube
  • Page 9 – Installation of cutting blade; with the box wrench.; Installation of the cutting head; They can break off and become a dangerous projectile.
  • Page 10 – Operating procedures
  • Page 11 – before subjecting it to any load.
  • Page 12 – where it is difficult to see the material to be cut.
  • Page 13 – OF THE EMISSION CONTROL DEVICES AND; The air filter must be cleaned from dust and dirt in order to avoid:
  • Page 14 – element out of holder assembly. Replace filter if it appears to be
  • Page 15 – Do not completely fill the transmission.
  • Page 19 – The following standards have been taken into consideration
  • Page 20 – IMPORTANT NOTICE; THIS INFORMATION IS FOR THE US AND CANADIAN MARKETS ONLY.; uncertain about any aspect of blade use on your Tanaka unit.
  • Page 21 – and utilizes centrifugal; Cutting Attachments for Tanaka Trimmers and Brushcutters
Loading the manual

Owner’s Manual

Model Numbers:

T B C - 2 5 0 , T B C - 2 5 0 P F / P F D ,

T B C - 2 5 0 1 , T B C - 2 5 1 0 ,

T B C - 2 7 0 P F / P N , T B C - 2 7 0 P F D / P N D

T B C - 3 0 0 / S D H / 3 0 1 0 , T B C - 3 4 0 / D ,

T B C - 3 4 0 P F / P F D

BRUSHCUTTERS

P/N 29363

Date 04-06-05

Supplier To The Outdoor Power Equipment Industry

ISM, Inc. • 1028 4

th

Street SW • Auburn, WA 98001 • Phone: (253) 333-1200 • Fax: (253) 333-1212

w w w . t a n a k a - u s a . c o m

[email protected]

TBC-3010

TBC-270PF

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - www.tanaka-usa.com 1 [email protected]; Owner’s Manual; Before using this unit:; Read the operator’s manual carefully.; WARNING; The engine exhaust from this product; stop the engine and cutting

www.tanaka-usa.com 1 [email protected] Owner’s Manual TBC-250/250PF/PFD,TBC-2501,TBC-2510,TBC-270PF/PFD TBC-270PN/PND,TBC-300/SDH/3010,TBC-340/D,TBC-340PF/D Before using this unit: • Read the operator’s manual carefully. • Check that the cutting equipment is correctly assembled and adjusted. • ...

Page 4 - instructions that apply to your unit.

www.tanaka-usa.com 3 [email protected] Owner’s Manual TBC-250/250PF/PFD,TBC-2501,TBC-2510,TBC-270PF/PFD TBC-270PN/PND,TBC-300/SDH/3010,TBC-340/D,TBC-340PF/D 1. What is What? Since this manual coves several models, there may be some difference between pictures and your unit. Use the instructions...

Page 6 - Assembly procedures

www.tanaka-usa.com 5 [email protected] Owner’s Manual TBC-250/250PF/PFD,TBC-2501,TBC-2510,TBC-270PF/PFD TBC-270PN/PND,TBC-300/SDH/3010,TBC-340/D,TBC-340PF/D 3. Assembly procedures Drive shaft to engine (Fig. 1 -1) Loosen tube locking bolt (1) about ten turns so that the bolt point will not obst...

Other Tanaka Models

All Tanaka Other