Tanaka HTD-2530PF - Manual
Tanaka HTD-2530PF – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – [email protected]; Owner’s Manual; Before using this unit:; Read the operator’s manual carefully.; WARNING; The engine exhaust from this product
- Page 3 – [email protected]
- Page 5 – [email protected]; Assembly procedures; Remove the four washers and nuts (1) from cutting blade end.
- Page 6 – Operating procedures; Fuel; Always shut off the engine before refueling.
- Page 8 – Cutting; Decrease engine speed, and push ignition switch to stop position.
- Page 9 – MAINTENANCE, REPLACEMENT, OR REPAIR OF THE; The air filter must be cleaned from dust and dirt in order to avoid:
- Page 11 – For long-term storage
- Page 14 – 3 [email protected]
Owner’s Manual
Model Numbers:
THT-210/210S/2000/2100/2120
THT-2510/2520/240/2530/2540
HTD-2520PF/2522PF/2526PF
HTD-2530PF,HTS-2530PF
HEDGETRIMMERS
P/N 28334
Date 04-06-05
Supplier To The Outdoor Power Equipment Industry
ISM, Inc. • 1028 4
th
Street SW • Auburn, WA 98001 • Phone: (253) 333-1200 • Fax: (253) 333-1212
w w w . t a n a k a - u s a . c o m
THT-2120
HTD-2530PF
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
www.tanaka-usa.com 1 [email protected] Owner’s Manual THT-210/210S/2000/2100/2120/2520, THT-240/2510/2530/2540/262 HTD-2520PF/2522PF/2526PF/2530PF, HTS-2530PF Before using this unit: • Read the operator’s manual carefully. • Check that the cutting equipment is correctly assembled and adjusted. ...
www.tanaka-usa.com 2 [email protected] Owner’s Manual THT-210/210S/2000/2100/2120/2520, THT-240/2510/2530/2540/262 HTD-2520PF/2522PF/2526PF/2530PF, HTS-2530PF 1. Recoil Starter 2. Fuel Tank 3. Safety Trigger 4. Throttle Trigger 5. Front Handle 6. Rear Handle 7. Spark Plug 8. Hand Guard 9. Cutti...
www.tanaka-usa.com 4 [email protected] Owner’s Manual THT-210/210S/2000/2100/2120/2520, THT-240/2510/2530/2540/262 HTD-2520PF/2522PF/2526PF/2530PF, HTS-2530PF 3. Assembly procedures Handle B (3) and Gathering Plate (4) (Fig, 1-1) 1. Remove the four washers and nuts (1) from cutting blade end. N...
