Tanaka ECV-4501 - Manual
Tanaka ECV-4501 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Owner’s Manual; Before using this unit:; Read the operator’s manual carefully.; While cutting, hold saw firmly with; WARNING; The engine exhaust from this product
- Page 4 – Warnings and safety instructions
- Page 5 – Assembly procedures; PROPER TENSION IS EXTREMELY IMPORTANT!; is excessively loosened, it may get out of the groove in the bar.
- Page 6 – Operating procedures; Fuel; Always use branded 89 octane unleaded gasoline.; Fueling; Always shut off the engine before refueling.
- Page 7 – Starting Warm Engine; ADJUSTMENT OF CHAIN OIL SUPPLY
- Page 8 – CHAIN CATCHER
- Page 9 – BASIC TECHNIQUES FOR MAKING FELLING, LIMBING AND BUCKING CUTS; more efficient and safer.
- Page 10 – BASIC RULES FOR FELLING TREES; Felling is more than cutting down a tree. You must also
- Page 11 – LIMBING; Limbing is removing the branches from a felled tree.; LIMBING THICK BRANCHES; Take a firm stance. Begin with an upper cut.
- Page 12 – THICK LOG, LARGER THAN GUIDE BAR LENGTH; and can result in kickback.; CROSS CUTTING LOGS, PRESSURE ON BOTTOM
- Page 14 – The air filter (1) must be cleaned from dust and dirt in order to; Cleaning the air filter; The spark plug condition is influenced by:
- Page 15 – For long-term storage
- Page 17 – SHARPENING ANGLES FOR SHARPENING SAW; CHAIN SHARPENING; Gloves should be used when sharpening chain.
- Page 18 – Maintenance schedule
- Page 21 – IMPORTANT NOTICE; THIS INFORMATION IS FOR THE US AND CANADIAN MARKETS ONLY.; MODEL NUMBER
Owner’
Owner’
Owner’
Owner’
Owner’s Man
s Man
s Man
s Man
s Manual
ual
ual
ual
ual
Model Numbers:
ECV-4501
ECV-4501
ECV-4501
ECV-4501
ECV-4501
CHAINSAW
CHAINSAW
CHAINSAW
CHAINSAW
CHAINSAW
P/N 29768
Date 05-04-01
Supplier To The Outdoor Power Equipment Industry
ISM, Inc. • 1028 4
th
Street SW • Auburn, WA 98001 • Phone: (253) 333-1200 • Fax: (253) 333-1212
www.tanakapowerequipment.com
ECV-4501
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
www.tanakapowerequipment.com 1 [email protected] Owner’s Manual ECV-4501 Before using this unit: • Read the operator’s manual carefully. • Check that the cutting equipment is correctly assembled and adjusted. • Start the unit and check the carburetor adjustment. See “Maintenance”. One-handed us...
www.tanakapowerequipment.com 3 [email protected] Owner’s Manual ECV-4501 2. Warnings and safety instructions Operator Safety • Always wear a safety face shield or goggles. • Gloves should be used when sharpening chain. • Always wear safety protective equipment such as jacket, trousers, gloves, ...
www.tanakapowerequipment.com 4 [email protected] Owner’s Manual ECV-4501 3. Assembly procedures WARNING! Never try to start engine without side case securely fastened. ** Install the provided spiked bumper (1) to the unit with the two screws. (Fig. 1-0) 1 . Remove the side case by unscrewing tw...
