Tanaka AST-210 - Manual
Tanaka AST-210 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Owner’s Manual; Before using this unit:; Read the operator’s manual carefully.; WARNING; The engine exhaust from this product; stop the engine and cutting
- Page 6 – Drive shaft to engine; meets the clutch case.; Assembly procedures
- Page 7 – Attach the handle to the drive shaft tube with the angle
- Page 8 – Other blade guards
- Page 9 – Operating procedures; Fuel; Always shut off the engine before refueling.
- Page 10 – is done, the engine may become flooded and hard to start.
- Page 11 – If the; Battery charging procedure; Do not leave the charger plugged in for more than 24 hours.
- Page 12 – • Cut grass from right to left.; and attachment and remove them.
- Page 13 – The air filter must be cleaned from dust and dirt in order to avoid:; Cleaning the air filter; The cutting attachment may be spinning
- Page 14 – If element is hard due to excessive dirt buildup, replace it.
- Page 17 – Maintenance schedule
- Page 18 – Spark arrestor
- Page 19 – * All data subject to change without notice.
- Page 21 – IMPORTANT NOTICE; THIS INFORMATION IS FOR THE US AND CANADIAN MARKETS ONLY.; dealer for more details.; Cutting Attachments for Tanaka Trimmers and Brushcutters
Owner’
Owner’
Owner’
Owner’
Owner’s Man
s Man
s Man
s Man
s Manual
ual
ual
ual
ual
Model Numbers:
AST-210, AST-5000
AST-210, AST-5000
AST-210, AST-5000
AST-210, AST-5000
AST-210, AST-5000
A
A
A
A
AUT
UT
UT
UT
UTO-ST
O-ST
O-ST
O-ST
O-STAR
AR
AR
AR
ART TRIMMERS
T TRIMMERS
T TRIMMERS
T TRIMMERS
T TRIMMERS
P/N 27344
Date 04-19-01
Supplier To The Outdoor Power Equipment Industry
ISM, Inc. • 1028 4
th
Street SW • Auburn, WA 98001 • Phone: (253) 333-1200 • Fax: (253) 333-1212
www.tanakapowerequipment.com
AST-210
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
www.tanakapowerequipment.com 1 [email protected] Owner’s Manual AST-210,AST-5000 Before using this unit: • Read the operator’s manual carefully. • Check that the cutting equipment is correctly assembled and adjusted. • Start the unit and check the carburetor adjustment. See “Maintenance”. WARNI...
www.tanakapowerequipment.com 5 [email protected] Owner’s Manual AST-210,AST-5000 NOTE! When it is hard to insert drive shaft up to the marked position on the drive shaft tube, turn drive shaft by the cutter mounting end clockwise or counterclockwise. Tighten tube locking bolt lining up the hole...
www.tanakapowerequipment.com 6 [email protected] Owner’s Manual AST-210,AST-5000 Throttle wire/stop cord (AST-210) Connect stop cord connectors. (Fig. 1-4) Connect throttle wire end to carburetor. (Fig. 1-5) Installation of handle (Fig. 1-2, 2B) Attach the handle to the drive shaft tube with th...
