Page 2 - IMPORTANT SAFEGUARDS; The caution marking is located on the rear of the cabinet.; CAUTION
1.Read instructions - All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions - The safety and operating instructions should be retained for future reference. 3.Heed Warnings - All warnings on the appliance and in the operating instructions sh...
Page 4 - PRECAUTIONS
- 4 - EN The serial number of this product may be found on the back of the unit. No other unit has the same serialnumber as yours. You should record the number and other vital information here and retain this book as a per-manent record of your purchase to aid identification in case of theft. Serial...
Page 5 - QUICK; SYMBOLS USED IN THIS MANUAL; SUPPLIED ACCESSORIES
- 5 - EN AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE LOCATION For safe operation and satisfactory performance ofyour unit, keep the following in mind when selectinga place for its installation: • Shield it from direct sunlight and keep it away fromsources of intense heat. • Avoid dusty or humid p...
Page 6 - TABLE OF CONTENTS
- 6 - EN TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . .4 LOCATION . . . . . . . . . . . . . . . . . . .5 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE .5 WARNING . . . . . . . . . . . . . . . . . . . .5 SYMBOLS USED IN THIS MANUAL . . . . . . . . ....
Page 7 - Fast-forwards to start of next recording.; FEATURES
- 7 - EN ¡ Rotary 4-head Record/Playback System Four heads ensure excellent picture quality andspecial effects playback. ¡ Index Search Fast-forwards to start of next recording. ¡ Slow Motion View recorded program at slower than normalspeed. ¡ Infrared remote control ¡ Trilingual on screen TV/VCR se...
Page 8 - The part designated by user can be called back.; DVD Mode
- 8 - EN ¡ On-screen display Information about the current operation can be dis-played on a TV screen, allowing you to confirm thecurrently active functions (such as program play-back), on the TV screen using the remote control. ¡ Search Chapter search / Title search / Track search / Timesearch ¡ Re...
Page 9 - OPERATING CONTROLS AND FUNCTIONS; DVD buttons
- 9 - EN OPERATING CONTROLS AND FUNCTIONS 5. C STOP Button [TV/VCR P.23 / DVD P.35] (Front panel) Stops operation of the disc.(Remote control) Stops operation of the disc ortape contents. 6. A OPEN/CLOSE Button [DVD P.35] Press to insert a disc into or remove it from thetray. 7. Disc loading tray 8....
Page 11 - INSTALLING THE BATTERIES; )Open the battery compartment cover by pressing
- 11 - EN 45. ANT(ENNA). Jack [P.12] Connect to an antenna, cable system or satellitesystem. 46. Power cord [P.15] Connect to a standard AC outlet (120V/60Hz). NOTE: • Remove the power cord from the hook toavoid breaking a wire before you connect to astandard AC outlet. 47. AUDIO OUT COAXIAL Jack [P...
Page 12 - PREPARATION FOR USE; ANTENNA/CABLE CONNECTION; Note to CATV system installer:; Cable; Rear of the unit
NOTE: • Before plugging the antenna into the ANT. jack of the unit, check that the pin isnot bent. If it is bent, straighten the pin as illustrated, then plug the pin into theANT. jack of the unit. - 12 - EN PREPARATION FOR USE ANTENNA/CABLE CONNECTION Bent pin Cable Plug (Needs to be straightened) ...
Page 13 - To the Audio output jacks; AUX
CONNECTING TO FRONT A/V INPUT JACKS When you watch a program recorded on another source (VCR or video camera), use theAudio/Video input jacks on the front of the unit.Connect the Audio/Video output jacks of another source to the AUDIO L/R and VIDEOjacks of this unit. Then press [SELECT] or [CH. K K ...
Page 14 - CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)
- 14 - EN ANT. AUDIO OUT COAXIAL Front speaker (left) Center speaker Front speaker (right) Surround speaker (left) Surround speaker (right) Subwoofer To AUDIO OUTCOAXIAL jack(Only DVD AUDIO OUT) To Coaxial digitalAudio input jack Dolby Digital decoder [Fig. 7] CONNECTING TO A DOLBY DIGITAL DECODER (...
Page 15 - TV OPERATION AND SETTINGS; DEGAUSSING; TO WATCH EXTERNAL INPUT; PICTURE CONTROL
- 15 - EN TV/VCR SECTION TV OPERATION AND SETTINGS DEGAUSSING This television has a degaussing circuit that will clearup color errors on the TV screen that are caused byany excess magnetism which happens to get too closeto the TV. This circuit is designed to operate oncewhen the set is first plugged...
Page 16 - CLOSED CAPTION SYSTEM; SLEEP TIMER; Call up the Sleep Timer Setting; TO CANCEL THE SLEEP TIMER
- 16 - EN • Playback of poorly recorded or worn VCR tapes. • If the unit displays a black boxon the TV screen, this means thatthe unit is set to the TEXT mode.To clear screen, select [CAP-TION1], [CAPTION2] or [OFF]. Make sure ... • The unit must be turned on. 1 Select “CAPTION” Press [SETUP] . Pres...
Page 17 - CHANNEL SET UP; AUTO CHANNEL PROGRAMMING; the Number
- 17 - EN CHANNEL SET UP Make sure ... • The unit must be turned on. AUTO CHANNEL PROGRAMMING As the initial setting, this unit has memorized allchannels, including the ones not available in yourarea. This feature automatically puts only availablechannels into the memory. 1 Select “CHANNEL SET UP” P...
Page 18 - In the example below, the clock is to be set to:; CLOCK SET UP
- 18 - EN 5 Select the year Press [ K / L ] until your desired year appears.(Example: “2005”)Then press [ B ] . 6 Select the hour Press [ K / L ] until your desired hour appears.(Example: “5”, “PM”)Then press [ B ] . 7 Select the minute Press [ K / L ] until the desired minute appears.(Example: “40”...
Page 19 - AUTOMATIC CLOCK SETTING; Select “SETTING CLOCK”
- 19 - EN DAYLIGHT-SAVING TIME Select this feature and the unit’s clock automaticallywill advance one hour in April, then reverse one hourin October.When Daylight-Saving Time is ON, the clock willchange automatically as follows: • First Sunday of April : At 2 AM the clock immedi- ately changes to 3 ...
Page 20 - the Number buttons; TV RATING SET UP; Selection; Step
This feature enables parents to prevent their childrenfrom watching inappropriate material on TV. Whenyou try to access a program which is blocked,“PROTECTED PROGRAM by ...” message appearson the TV screen. V-CHIP SET UP Make sure ... • The unit must be turned on. 1 Select “V-CHIP SET UP” Press [SET...
Page 21 - CHANGE ACCESS CODE; MPAA RATING SET UP; MENU LANGUAGE
CHANGE ACCESS CODE Follow steps 1 to 3 in the “V-CHIP SET UP” sec- tion on page 20. 4 Enter New code Press the Number buttons to enter your desired access code in the“NEW CODE” space, then enterthe same code in the “CONFIRMCODE” space. When completed, the menu willreturn to “V-CHIP SET UP”. • Make s...
Page 22 - VIDEO CASSETTE; REMOVING A CASSETTE
- 22 - EN - 22 - EN VIDEO CASSETTE This unit will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. REMOVING A CASSETTE 1)In the stop mode, press [ C A STOP/EJECT] on the unit. The cassette will be eje...
Page 23 - PLAYBACK; NORMAL PLAYBACK; Insert a prerecorded tape; TRACKING ADJUSTMENT; STILL PICTURE
- 23 - EN - 23 - EN PLAYBACK NORMAL PLAYBACK Make sure ... • The unit must be turned on. 1 Insert a prerecorded tape If the erase-prevention tab has been removed, theunit will start playback automatically. 2 To begin playback Press [PLAY O ] . 3 To stop playback Press [STOP C ] . NOTES: • Even in th...
Page 24 - SPECIAL PLAYBACK; TO CANCEL THE RENTAL MODE; RENTAL PLAYBACK; BLANK REPEAT; TO CANCEL THE REPEAT PLAY MODE; AUTO REPEAT PLAYBACK
- 24 - EN - 24 - EN - 24 - EN - 24 - EN SPECIAL PLAYBACK This function enables you to improve the picturequality when playing back worn cassettes such asrented tapes. 1 Select “USER’S SET UP” Press [SETUP] . Press [ K / L ] to point to “USER’S SET UP”, then press [ENTER] . 2 Set “RENTAL” to [ON] Pre...
Page 25 - SEARCH; WILL NOT; ZERO RETURN; In the example below:; TO CANCEL DURING TIME SEARCH; PICTURE SEARCH
- 25 - EN - 25 - EN - 25 - EN - 25 - EN SEARCH Make sure ... • The unit must be turned on. • Insert a tape. This function allows you to search easily a beginningpoint that you want to review by rewinding or fastforwarding. NOTE: • Zero Return WILL NOT work on a blank tape or a blank portion of a tap...
Page 26 - Select “INDEX SEARCH”
- 26 - EN - 26 - EN - 26 - EN - 26 - EN INDEX SEARCH This feature provides a method of indexing the start-ing point so that it can be easily returned to in eitherfast forward or rewind mode. • The index mark will be made automatically when [RECORD] is pressed. It will also be marked at the starting ...
Page 27 - SPECIAL FEATURES; REAL TIME TAPE COUNTER
- 27 - EN This shows the elapsed recording or playback time inhours, minutes, and seconds. (The displayed time willnot change on a blank tape or blank portions on thetape.) The “–” indication will appear when the tape hasrewound further than “0:00:00” on the tape counter. TV/VCR SPECIAL FEATURES REA...
Page 28 - RECORDING; Select the channel to be recorded; Select the tape speed; NORMAL RECORDING
- 28 - EN - 28 - EN - 28 - EN - 28 - EN - 28 - EN RECORDING Make sure ... • The unit must be turned on. • Insert a cassette tape with its erase-prevention tab in place. (If necessary, rewind or fast forward the tape tothe point at which you want to begin recording.) NOTES: • This unit will ONLY reco...
Page 29 - cannot; You can not copy a DVD to a videotape.; COPYING A VIDEO CASSETTE
- 29 - EN - 29 - EN - 29 - EN - 29 - EN This function enables you to set a recording lengthsimply by pressing [ I REC/OTR] on the unit. Make sure ... • The unit must be turned on. • Insert a cassette tape with its erase-prevention tabin place. (If necessary, rewind or fast forward thetape to the poi...
Page 30 - TIMER RECORDING; In the example below, the timer is being set to record:; AUTOMATIC TIMER; Select “TIMER PROGRAMMING”; For every day recording :
- 30 - EN - 30 - EN - 30 - EN - 30 - EN - 30 - EN TIMER RECORDING You may set the unit to start and end a recordingwhile you are away. You can set 8 programs to recordon specific days, daily or weekly within a 1 yearperiod. In the example below, the timer is being set to record: DATE: July 4th, 2005...
Page 32 - TO CONFIRM THE TIMER SETTING; AUTO RETURN; Select “USER’S SET UP”
- 32 - EN - 32 - EN - 32 - EN - 32 - EN - 32 - EN TO CONFIRM THE TIMER SETTING 1)Press [POWER] so that the Recording indicator light goes off. 2)Press [SETUP] . 3)Confirm “TIMER PROGRAMMING” is selected.4)Press [ENTER] . The details of programs appear on the TV screen. 5)Press [SETUP] to return to T...
Page 33 - ON SCREEN DISPLAY; When the Closed Caption mode is OFF:; OFF mode; CABLE CHANNEL DESIGNATIONS
- 33 - EN - 33 - EN - 33 - EN - 33 - EN - 33 - EN ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press [DISPLAY] . Each time you press [DISPLAY] , the TV screen will change as follows: When the Closed Caption mode is OFF: • Counter mode: After 5 seconds, only the ...
Page 34 - DVD SECTION; ABOUT THE DISCS; recorder or special properties of discs.; On the following disc, the sound MAY NOT be heard.; Super Audio CD; PLAYABLE DISCS
– 34 – EN DVD SECTION ABOUT THE DISCS If you cannot play back a disc which bears one of the marks above, check the following notes. *1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back. *2: Certain DVD-Video discs do not operate as ...
Page 35 - PLAYING A DISC; BASIC PLAYBACK; Getting started; CD; GENERAL FEATURES; the appropriate; TITLE MENU; ] to select an item and
– 35 – EN PLAYING A DISC BASIC PLAYBACK Getting started ¡ Turn on the power of amplifier and any other com-ponents, if necessary. 1 Press [POWER]. ¡ The power will turn on. 2 Press [ A OPEN/CLOSE] to open disc load- ing tray. 3 Place the chosen disc in the tray, with thelabel facing up. CD DVD-V 4 P...
Page 37 - SEARCH FUNCTION; TRACK SEARCH; Using the Number buttons; TITLE / CHAPTER SEARCH; MARKER SETUP SCREEN
– 37 – EN SEARCH FUNCTION TRACK SEARCH There are three ways to begin playback on an AudioCD at a specific track. Using the Number buttons 1 Press the Number buttons to enter thedesired track number. ¡ Playback will start at the selected track. ¡ For single digit tracks (1-9), press a single number(e...
Page 38 - SPECIAL PLAYBACK FUNCTION; REPEAT; REPEAT TITLE / CHAPTER; REPEAT TRACK; PROGRAM; Repeat step; RANDOM PLAYBACK
– 38 – EN SPECIAL PLAYBACK FUNCTION REPEAT REPEAT TITLE / CHAPTER To activate the repeat function, press [REPEAT]during playback. ¡ The repeat mode changes as described below everytime you press the button. DVD-V REPEAT is available only during playback. CHAPTER TITLE OFF ( current chapter repeat) (...
Page 39 - CHANGING THE SETTINGS; AUDIO LANGUAGE; SUBTITLE LANGUAGE
– 39 – EN CHANGING THE SETTINGS AUDIO LANGUAGE The unit allows you to select a language during DVDdisc (if multi languages are available) playback. 1 Press [AUDIO] during playback. 2 Press [AUDIO] repeatedly to select yourdesired language. NOTE: ¡ Pressing [AUDIO] may not work on some DVDs with mult...
Page 40 - CAMERA ANGLE; ” icon appears on the; BLACK LEVEL SETTING; VIRTUAL SURROUND
– 40 – EN CAMERA ANGLE Some DVD discs contain scenes which have been shotsimultaneously from various angles. You can changethe camera angle when the “ ” icon appears on the screen. 1 Press [ANGLE] during playback. ¡ The selected angle will be displayed on the displaybar at the top of the screen. ¡ I...
Page 41 - THE ON-SCREEN INFORMATION; For Audio CDs; will be displayed at step
– 41 – EN For DVD-Vs 1 Press [DISPLAY] during playback to showcurrent Chapter. ¡ The elapsed and remainingplaying time of the currentchapter will be displayed. 2 Press [DISPLAY] again to show current Title. ¡ The elapsed and remainingplaying time of the currenttitle will be displayed. 3 Press [DISPL...
Page 42 - Select the desired item.; LANGUAGE SETTING; ] to select the desired item then; CHANGING THE DVD SET UP ITEMS; CUSTOM MENU
You can change the DVD player’s settings. 1 Press [SETUP] twice in the stop mode sothat the DVD SETUP menu appears. ¡ Press [ L ] to select “CUSTOM” then press [ENTER] . NOTE: ¡ If the menu does not appear, press [PLAY O ] first, then press [STOP C ] . Make sure the disc is in the stop mode, then sl...
Page 43 - AUDIO SETTING; Follow steps; When playing disc with copyright Protection; LANGUAGE SETTING FOR THE ON-SCREEN MENUS; DISPLAY SETTING; ] to select the below items then; QUICK MENU
– 43 – EN AUDIO SETTING Choose the appropriate Audio settings for your equip-ment as it only affects during the playback of DVDdiscs. Follow steps 1 to 2 in the “CUSTOM MENU” section on page 42. 3 Press [ K / L ] to select the below items then press [ENTER]. DRC (Dynamic RangeControl): ¡ To compress...
Page 44 - CONTROL LEVELS; PARENTAL CONTROL; PARENTAL LEVEL; IF YOU FORGET THE PASSWORD; menu language; OTHER SETTINGS; INITIALIZE
– 44 – EN – 44 – CONTROL LEVELS ¡ ALL All parental lock is cancelled. ¡ Level 8 DVD software of any grade (adult/general/children)can be played back. ¡ Levels 7 to 2 Only DVD software intended for general use andchildren can be played back. ¡ Level 1 Only DVD software intended for children can bepla...
Page 45 - TROUBLESHOOTING GUIDE; PROBLEM
– 45 – EN Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlookedpossibilities. Before arranging for service, check these items. It could save your time and money. TV/VCR Mode TROUBLESHOOTING GUIDE PROBLEM CORRECTIVE ACTION No picture or sound • Make ...
Page 48 - please call our help line mentioned on; IF THE LASER OPTICAL PICKUP UNIT IS DIRTY; DISC HANDLING; MAINTENANCE
– 48 – EN EN CABINET CLEANING • Wipe the front panel and other exterior surfaces ofthe unit with a soft cloth immersed in lukewarmwater and wrung dry. • Never use a solvent or alcohol. Do not spray insec-ticide liquid near the unit. Such chemicals maycause damage and discoloration to the exposed sur...
Page 49 - Designs and specifications are subject to change without notice.; DVD; GENERAL SPECIFICATIONS; SPECIFICATIONS
– 49 – EN CRT: 19 inch in-line gun, 90˚ deflection tube Television system: NTSC-M Closed caption system :§15.119/FCCVideo Heads: Rotary four-head Tape width: 1/2 inch Tape speed SP: 33.40mm/sec. LP: 16.67mm/sec. SLP: 11.12mm/sec. Tuner channel TV VHF Low: #2~#6 TV VHF High: #7~#13 TV UHF: #14~#69 CA...
Page 50 - INDICE; CONTROLES DE
– 50 – ES 1. Botón POWER Presione para encender y apagar la unidad. 2. Botones VOLUME (VOL.) K / L Presione para controlar el nivel de volumen del DVD yel televisor. 3. Botones SKIP H / G (para DVD) Presione una vez para omitir capítulos o pistas ydesplazarse a un punto específico. Botones SEARCH E ...
Page 51 - PARA INSERTAR LAS PILAS; PREPARACIÓN PARA LA; CONEXIONES DE ANTENA/CABLE; Nota para el instalador de sistemas CATV
– 51 – ES 30. Botón CLEAR Presione para cancelar o borrar un ajuste entrado actualmente. 31. Botón MODE Presione para llamar la pantalla de la reproducciónprogramada o la de reproducción aleatoria en el modode parada.Presione para llamar la pantalla de ajuste del nivel delnegro o la pantalla de soni...
Page 52 - Consulte la figura 6 de la página 13; CONEXIÓN A TOMAS DE; que aparezca “AUX” en la pantalla.
– 52 – ES CONEXIÓN A UN DECODIFICADOR DOLBY DIGITAL (para DVD) Si utiliza esta unidad para reproducir un disco DVDgrabado en formato de sonido envolvente DolbyDigital de 5,1 canales, la unidad emitirá un flujo dedatos DOLBY DIGITAL desde su toma AUDIOOUT COAXIAL. Si conecta la unidad a undecodificad...
Page 53 - IDIOMA DEL MENÚ; FUNCIONES Y AJUSTES; los botones numéricos; PARA VER UNA ENTRADA EXTERNA; PARA MIRAR UN PROGRAMA DE TV; AJUSTE MANUAL DEL RELOJ; En el siguiente ejemplo, el reloj debe estar en:; AJUSTE DEL RELOJ
– 53 – ES 1 Seleccione “LANGUAGE” Presione [SETUP] . Presione [ K / L ] para apuntar a “LANGUAGE”. 2 Seleccione “ENGLISH”, “ESPAÑOL” o“FRANÇAIS” Presione [ENTER] repetidamente para seleccionar “ENGLISH” = inglés, “ESPAÑOL” o “FRANÇAIS”= francés. 3 Salga del modo de idioma Presione [SETUP] para salir...
Page 54 - GRABACIÓN; GRABACIÓN NORMAL
– 54 – ES 5 Seleccione el año Presione [ K / L ] hasta que aparezca el año deseado. (Ejemplo: “2005”)Presione [ B ] . 6 Seleccione la hora Presione [ K / L ] hasta que aparezca la hora deseada. (Ejemplo: “5”, “PM”)Presione [ B ] . 7 Seleccione los minutos Presione [ K / L ] hasta que aparezcan los m...
Page 55 - REPRODUCCIÓN BÁSICA; Para empezar; La alimentación se conectará.; bandeja de carga del disco.; MENÚ DE DISCO; Aparecerá el menú principal de DVD.; REANUDACIÓN; desde el punto donde se paró la reproducción.; Para cancelar la continuación, presione dos veces
– 55 – ES SECCIÓN DE DVD REPRODUCCIÓN BÁSICA Para empezar ¡ Conecte la alimentación del amplificador y otroscomponentes, si es necesario. 1 Presione [POWER]. ¡ La alimentación se conectará. 2 Presione [ A OPEN/CLOSE] para abrir la bandeja de carga del disco. 3 Ponga el disco deseado en la bandeja, c...
Page 56 - Printed in Thailand; LIMITED WARRANTY; LIMITS AND EXCLUSIONS:; PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
Printed in Thailand 1EMN20670 T0153UD ★★★★★ LIMITED WARRANTY FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) y...
